AEG SANTO Upright Refrigerator Operating Instructions Manual page 14

Reversing the Door
4. Remove the door fitting on the
lower right (1) and reposition the
door bearing cover from the lower
left to the right of the door (2),
place the door fitting supplied in
the lower left of the door (3).
Carefully remove the door to the
front and place on one side.
5. Move the upper bearing pivot to
the left.
6. Carefully slide the door onto the
top bearing pivot and close.
7. Place the lower door bearing with
the bearing pivot in the lower left
of the door and fasten.
8. Move the door handle from the
left to the right and cover the
remaining holes with the blank-
ing plugs attached.
9. Open the door and fit the plinth
cover.
14
818 19 27-00/8