Xover Utility Screen - BSS Audio Omnidrive FDS-388 User Manual

XOver Utility Screen

12.0 XOver Utility Screen
Master Slope
Master Shape
Limit Units
Mono Lo
Lim A, B, C, D
34
Quick Reference
1 Press the parameter wheel to move between utilities.
2 Turn the parameter wheel to adjust the value.
24, 18, 12dB/Oct
Changing this value will change the band edge slopes for all band edges.
Refer to Section 13.0 XOver More Screen
Bessel, Butterw, L-Riley
Changing this value will change the band edge shapes for all band edges
between Bessel, Butterworth and Linkwitz-Riley. It should be noted that
Linkwitz-Riley is specified to be 12 or 24dB/Oct although this unit will allow
users access to this shape at 18dB/Oct.
dBu, mV
This item changes the units used for the limiter threshold values on the XOver
Screen between dBu and mV. The selection enables the user to more easily
match limiter thresholds to the specification of the driven amplifiers.
On, Off
Mono Lo sums the two A band outputs of the FDS-388 to produce a mono
output, such as for a mono sub-bass feed.
Norm, Fast
Each band limiter can be set to fst or normal attack time. The default setting
is normal. The fast setting provides better driver protection especially against
over-excursion, but the sound of the limiter may be less transparent.