1. Manuals
  2. Brands
  3. BSS Audio Manuals
  4. Remote Control
  5. FPC-800
  6. User manual

BSS Audio FPC-800 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
BSS Audio
FPC-800 User
Manual
FPC-800
User Manual
We have written this manual with the aim of helping installers and sound
engineers to get to grips with the FPC-800 and obtain its maximum capability. If
you are new to BSS products, we recommend that you begin at the start of the
manual.
We welcome any comments or questions regarding the FPC-800 or other BSS
products, and you may contact us at the address or World Wide Web site given
in the warranty section.
Page 1 of 11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FPC-800 and is the answer not in the manual?

Questions and answers

Related Manuals for BSS Audio FPC-800

Summary of Contents for BSS Audio FPC-800

  • Page 1 BSS Audio FPC-800 User Manual FPC-800 User Manual We have written this manual with the aim of helping installers and sound engineers to get to grips with the FPC-800 and obtain its maximum capability. If you are new to BSS products, we recommend that you begin at the start of the manual.

  • Page 2: Table Of Contents

    BSS Audio FPC-800 User Manual Contents 1 INRODUCTION 2 UNPACKING 3 INTERFACE INSTALLATION 3.1 Interface Fitting 3.2 EPROM Fitting 4 FPC-800 POWER UP 5 CONTROLS, CONNECTIONS AND DOWNLOAD 6 TCS CONTROL 7 PARAMETER ADJUSTMENT 7.1 Delay distance 7.2 Level 7.3 Mute 7.4 Program store/recall...

  • Page 3: Inroduction

    BSS Audio FPC-800 User Manual 1 INRODUCTION The FPC-800 is a battery powered hand held remote control unit that will control up to sixteen TCS-804 units by a standard 3 wire audio lead or by a FM radio wireless system. In the latter case the user is then free to roam around an auditorium unrestricted by cables.

  • Page 4: Interface Installation

    BSS Audio FPC-800 User Manual 3 INTERFACE INSTALLATION To enable the FPC-800 to communicate with a TCS-804, it is necessary for the standard MIDI interface module fitted to the rear of the unit to be replaced with the FSK module. Please inspect the rear panel of the TCS-804 to confirm if it is fitted.

  • Page 5: Fpc-800 Power Up

    BSS Audio FPC-800 User Manual 4 FPC-800 POWER UP Power is provided by four AA cells, which should be installed into the rear of the unit by releasing the two battery compartment cover screws. Please observe correct polarity when fitting. Alkaline cells should provide an average life of 40 hours under normal use and the flashing battery low indicator light will advise when the cells need changing.

  • Page 6: Tcs Control

    BSS Audio FPC-800 User Manual Connect the FSK IN socket of the first TCS unit to the FSK OUT socket of the FPC-800, and the FSK OUT socket of the last (or only) TCS unit to the FSK IN socket of the FPC-800. This is the only time when the FSK INPUT socket on the FPC-800 will be used.

  • Page 7: Parameter Adjustment

    BSS Audio FPC-800 User Manual 7 PARAMETER ADJUSTMENT 7.1 Delay distance To adjust delay on a selected channel, use the SELECT switch to point to DELAY, and then press one of the four delay buttons so that the appropriate green indicator lights. Operate the DOWN/UP buttons to achieve the delay required.

  • Page 8: Fm Radio Link

    BSS Audio FPC-800 User Manual which is fed into the POH speaker system (or reference time zero system). If this speaker system is also using one of the TCS-804 units within the interconnected system, then ensure that it is set to channel 16.

  • Page 9: Master/Slave Operation

    BSS Audio FPC-800 User Manual FPC-800 FSK OUTPUT should be connected to the transmitter input, and the receiver output connected to the TCS-804 FSK IN. WARNING! Before the receiver connection is made to the FSK IN socket of the TCS-804, ensure that either the receiver is switched off, the TCS-804 is switched off, or the transmitter is switched on.

  • Page 10: Appendix

    BSS Audio FPC-800 User Manual 10 APPENDIX 10.1 Error Messages. DISPLAY MESSAGE Err.3 FSK interface timing error. Err.5 Incompatible stereo mode. Err.7 Download failure. Err.8 Measurement failure. If any other error messages persistently occur, make a note and consult your dealer.

  • Page 11: Warranty Information

    Manual 11 Warranty Information When sold to an end user by BSS Audio or a BSS Audio Authorised Reseller, this unit is warranted by the seller to the purchaser against defects in workmanship and the materials used in its manufacture for a period of one year from the date of sale.

Table of Contents