Mazda CX-5 Owner's Manual page 88

CX-5_8CA5-EA-11L_Edition3 Page88
Friday, June 22 2012 3:45 PM
Before Driving
Doors and Locks
1. Safely park the vehicle. All doors must
remain closed.
2. Switch the ignition ON.
3. Press and hold the lock side of the
driver's door-lock switch within 20
seconds of switching the ignition ON,
and make sure a beep sound is heard
about eight seconds afterwards.
4. Referring to the auto lock/unlock
function setting table and determine the
function number for the desired setting.
Press the unlock side of the driver's
door-lock switch the same number of
times as the selected function number
(Ex. If you select function 2, press the
unlock side of the switch only 2 times).
5. Three seconds after the function setting
has been changed, a beep sound will
beep in the amount of the selected
function number. (Ex. Function
number 3 = 3 beep sounds)
3-16
Form No.8CA5-EA-11L
Black plate (88,1)
(Manual transaxle vehicles)
Current Function Number
Press unlock side of
lock switch once
Press lock side of
Function Number 1
lock switch
Press 2 times
Function Number 2 Cancel setting
Press 3 times
Wait for 3 second
Function Number 3
Function set (The
number of beeps
Press 4 times
heard is the same as
the selected function
Cancel setting
number)