Download Print this page

Mazda CX-50 2023 Owner's Manual

Table Of Contents

page of 583

/ 583
Contents
Table of Contents
Bookmarks

Table of Contents

Advertisement

Quick Links

Download this manual

Table of Contents

Advertisement

Table of Contents

Need help?

Need help?

Do you have a question about the CX-50 2023 and is the answer not in the manual?

Questions and answers

Summary of Contents for Mazda CX-50 2023

Page 4 Mazda. Should you resell the vehicle, leave this manual with it for the next owner. All speciﬁcations and descriptions are accurate at the time of printing. Because improvement is a con- stant goal at Mazda, we reserve the right to make changes in speciﬁcations at any time without notice and without obligation.
Page 5 “Do not do this” or “Do not let the manual to best explain how to this happen”. enjoy your Mazda. By reading your manual, you can ﬁnd out about the features, important safety information, and driving under various road conditions.
Page 6 How to Use This Manual Please refer to the manual for a detailed explanation. Index: A good place to start is the Index, an alphabetical listing of all information in your manual.
Page 7 MEMO...
Page 8: Table Of Contents
Table of Contents Pictorial Index Interior, exterior views and part identiﬁcation of your Mazda. Essential Safety Equipment Important information about safety equipment, including seats, seat belt system, child-restraint systems and SRS air bags. Before Driving Use of various features, including keys, doors, mirrors and windows.
Page 10: Pictorial Index
Pictorial Index Interior, exterior views and part identiﬁcation of your Mazda. Interior Overview......1-2 Interior Equipment (View Interior Equipment (View D)........1-6 A)......... 1-2 Interior Equipment (View Interior Equipment (View E)......... 1-7 B)......... 1-4 Interior Equipment (View Exterior Overview..... 1-8 C).........1-5...
Page 11: Interior Equipment (View A)
③ Turn and lane-change signals............. page 4-53 ④ Audio remote control switches............page 5-23 ⑤ INFO switch..................page 4-19 ⑥ Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) switches................page 4-120 ⑦ Traffic Jam Assist (TJA) switches............page 4-130 ⑧...
Page 12 Pictorial Index Interior Overview ▼ Interior Equipment (View A-type B) ① Door-lock knob................page 3-17 ② Door-lock switch................page 3-15 ③ Outside mirror switches..............page 3-32 ④ i-ACTIVSENSE OFF switch..............page 4-92 ⑤ 360° view monitor switch..............page 4-165 ⑥ Parking sensor OFF switch............... page 4-215 ⑦...
Page 13: Interior Equipment (View B)
Interior Equipment (View B) ▼ Interior Equipment (View B) ① Instrument cluster................page 4-17 ② Active driving display................. page 4-34 ③ Mazda Connect................page 5-15 ④ Climate control system................ page 5-2 ⑤ Heated steering wheel switch.............page 2-21 ⑥ Seat warmer switches................ page 2-18 ⑦...
Page 14: Interior Equipment (View C)
⑪ Vent....................page 5-3 ⑫ Cup holder..................page 5-47 ⑬ Selector lever..................page 4-36 ⑭ Mazda intelligent Drive Select (Mi-Drive) switch......page 4-82, 4-83 ⑮ Commander switch................page 5-19 ⑯ Electric Parking Brake (EPB) switch............page 4-66 ⑰ AUTOHOLD switch................page 4-74...
Page 15: Interior Equipment (View D)
Pictorial Index Interior Overview Interior Equipment (View D) ▼ Interior Equipment (View D) ① Push knob..................page 2-13 ② Head restraint................... page 2-16 ③ Child safety lock................page 3-18 ④ Overhead light (rear)................. page 5-39 ⑤ Rear coat hook..................page 5-49 ⑥ Door-lock knob................page 3-17 ⑦...
Page 16: Interior Equipment (View E)
Pictorial Index Interior Overview Interior Equipment (View E) ▼ Interior Equipment (View E) ① Anchor brackets................page 2-42 ② Lever....................page 2-13 ③ Luggage compartment light..............page 5-39 The equipment and installation position varies by vehicle...
Page 17 Pictorial Index Exterior Overview ① Windshield wiper blades..............page 6-22 ② Panorama sunroof................page 3-40 ③ Door....................page 3-11 ④ Window................... page 3-37 ⑤ Touch sensor..................page 3-13 ⑥ Fuel-ﬁller lid..................page 3-30 ⑦ Outside mirror.................. page 3-32 ⑧ Liftgate..................... page 3-19 ⑨...
Page 18 Essential Safety Equipment Important information about safety equipment, including seats, seat belt system, child-restraint systems and SRS air bags. Seats........2-2 Child-Restraint System Seat Precautions....2-2 Installation......2-37 Front Seat......2-4 Child-Restraint System Suitability Rear Seat......2-13 for Various Seat Positions Head Restraints....2-16 Table........2-39 Installing Child-Restraint Systems.......2-42...
Page 19: Seat Precautions
Consult an Authorized Mazda Dealer if seatback. there is any need to remove or reinstall the front seats. Never allow children to adjust a seat:...
Page 20 Essential Safety Equipment Seats Do not place an object such as a Driving with a passenger on the folded cushion between the seatback and seatback is dangerous. Allowing a child your back: to sit up on the folded seatback while Putting an object such as a cushion the vehicle is moving is particularly between the seatback and your back is...
Page 21: Front Seat
To prevent the battery from  The adjustments for the driving running down, avoid using the position recommended by Mazda are power adjustment when the done using the following procedures. engine is stopped. The adjuster 1. Moving the steering wheel and seat uses a large amount of electrical to their default positions.
Page 22 Essential Safety Equipment Seats Manual seat locked in place by attempting to push it forward and backward. Power seat 1. Seat Slide To move a seat forward or backward, raise the lever and slide the seat to the desired position and 1.
Page 23 Press the rear part of the switch to decrease ﬁrmness. Before making adjustments to the driving position recommended by Mazda Before making adjustments, move the How to move a driver’s seat to its steering wheel and seat to their default default position positions.
Page 24 Essential Safety Equipment Seats 1. With your posture slightly slouched, 2. Move the seatback backward to a move the seatback forward to the comfortable seated posture without angle where your waist feels slightly any feeling of cramping in your cramped. waist.
Page 25 Essential Safety Equipment Seats 2. With your heel set on the ﬂoor, set the ﬂoor and make sure that your your right foot on the brake pedal ankle does not feel over-stretched. and move the seat forward as far as possible until you feel a slight cramping in your ankle.
Page 26 Essential Safety Equipment Seats 1. With your back resting against the 2. Depress the accelerator pedal and seatback, raise the seat to the make sure that you no longer feel height where you can see the rear cramping in the back of your knees. edge area of the hood surface from the windshield.
Page 27 Essential Safety Equipment Seats 2. Adjust the steering wheel height so Transmitter used for vehicle  that the gauges can be viewed easily. NOTE 3. Raise the lever to securely lock the Lumbar support adjustment cannot  steering wheel. be programmed. Programming 1.
Page 28 Essential Safety Equipment Seats The seat adjustment switch on the NOTE  driver's seat is operated. If you do not perform the operation  The angle of the outer mirrors is  correctly, a sound indicating that the adjusted. programming has failed is activated. The SET button is pressed.
Page 29 Essential Safety Equipment Seats ▼ Adjusting the Front Passenger's NOTE Seat When adjustment of the driving  position is not necessary, a sound is Manual seat not activated. The driving position adjustment is  canceled in the following cases: The seat adjustment switch on the ...
Page 30: Rear Seat
Essential Safety Equipment Seats locked in place by attempting to Rear Seat push it forward and backward. ▼ Split Folding the Seatbacks Power seat By lowering the rear seatbacks the luggage compartment space can be expanded. WARNING Tightly secure cargo in the luggage compartment when it is transported with the seatbacks folded down: Driving without tightly securing cargo...
Page 31 Essential Safety Equipment Seats lower the seatback you want to fold CAUTION down using the remote handle. Before folding the seatbacks down with the remote handle, make sure there is no cup in a rear cup holder. Folding the seatbacks with the remote handle while a cup is in the cup holder could soil or damage the seat bottom and seatback.
Page 32 Essential Safety Equipment Seats 1. Make sure that the seat belt passes WARNING through the seat belt guide. Always make sure the seat belts are fully pulled out from under the seatbacks: A seat belt caught under a seatback after the seatback is returned to its upright position is dangerous.
Page 33: Head Restraints
Essential Safety Equipment Seats Head Restraints WARNING ▼ Head Restraints Never put your hands and ﬁngers around the moving parts of the seat Your vehicle is equipped with head and armrest: restraints on all outboard seats and the Putting your hands and ﬁngers around rear center seat.
Page 34 Essential Safety Equipment Seats Front seats WARNING Always drive with the head restraints installed when seats are being used and make sure they are properly installed: Driving with the head restraints not installed is dangerous. With no support behind your head, your neck could be seriously injured in a collision.
Page 35: Seat Warmer
Front conjunction with auto mode for the climate control system. Auto mode operates when auto mode is enabled in the Mazda Connect settings. Refer to the Settings section in the Mazda Connect Owner's Manual. Press the AUTO switch to select auto mode.
Page 36 Essential Safety Equipment Seat Warmer/Seat Ventilation/Heated Steering Wheel Do not use the seat warmer with NOTE anything having high If the front passenger’s seat belt is  moisture-retention ability such as a unfastened, the front passenger’s blanket or cushion on the seat: seat warmer turns off.
Page 37: Seat Ventilation
The seat ventilation uses the fans Auto mode operates when auto mode installed on the seats to draw air is enabled in the Mazda Connect around the seat surface and ventilate settings. them. The ignition must be switched Refer to the Settings section in the Mazda Connect Owner's Manual.
Page 38: Heated Steering Wheel
The heated steering wheel can be operated in conjunction with auto mode for the climate control system. Auto mode operates when auto mode is enabled in the Mazda Connect settings. Refer to the Settings section in the Mazda Connect Owner's Manual.
Page 39 Essential Safety Equipment Seat Warmer/Seat Ventilation/Heated Steering Wheel Refer to Fully Automatic Type on page 5-10. The heated steering wheel automatically operates/turns off according to the conditions in the cabin. NOTE If the heated steering wheel switch is  pressed during auto mode or the auto operation of the climate control system is canceled, the heated steering wheel switches from auto...
Page 40: Seat Belt Precautions
They could be seriously injured accidents and sudden stops. Mazda or even killed. In the same collision, recommends that the driver and all occupants wearing seat belts would be passengers always wear seat belts.
Page 41 A damaged seat belt cannot portion of the belt snugly and as low as provide adequate protection in a possible. collision. Have an Authorized Mazda Dealer inspect all seat belt systems in CAUTION use during an accident before they are used again.
Page 42 Essential Safety Equipment Seat Belt Systems ▼ Pregnant Women and Persons with mode until it is switched to automatic locking mode by pulling it all the way Serious Medical Conditions out to its full length. If the belt feels Pregnant women should always wear tight and hinders comfortable seat belts.
Page 43 If a belt does not fully retract, inspect it for kinks and twists. If it is still not retracting properly, have it inspected at an Authorized Mazda Dealer. 1. Keep low on hip bone 2. Take up slack 3. Too high...
Page 44: Seat Belt Warning Systems
Essential Safety Equipment Seat Belt Systems ▼ Front Shoulder Belt Adjuster Seat Belt Warning The front seat belts have a front Systems shoulder belt adjuster. If the seat belt contacts your neck or it slips off the ▼ Seat Belt Warning Systems shoulder, adjust the seat belt height.
Page 45: Seat Belt Pretensioner And Load Limiting Systems
Even if the pretensioners have not ﬁred, the load limiting function must Pretensioners: be checked by an Authorized Mazda When a collision is detected, the Dealer. pretensioners deploy simultaneously WARNING with the air bags.
Page 46 The pretensioner system may not  load limiter has been expended: operate depending on the type of Always have an Authorized Mazda the collision. For details, refer to the Dealer immediately inspect the seat SRS Air Bag Deployment Criteria belt pretensioners and air bags after (page 2-64).
Page 47: Seat Belt Extender
Dealer. extender in a different vehicle or seat. This extender will be only for you and If you sell your Mazda, do not leave for the particular vehicle and seat. Even your seat belt extender in the vehicle. if it plugs into other seat belts, it may...
Page 48 Essential Safety Equipment Seat Belt Systems Do not leave a seat belt extender connected to the buckle: Leaving a seat belt extender connected to the buckle without using the seat belt is dangerous. When the seat belt extender is connected to the driver's seat belt buckle (or front passenger's seat belt buckle), the SRS driver's (or front passenger's) air bag system will...
Page 49: Child Restraint Precautions
(With Driver and Front Passenger ▼ Child-Restraint Precautions Occupant Classiﬁcation System) To reduce the chance of injuries Mazda strongly urges the use of caused by deployment of the front child-restraint systems for children passenger air bag, the front passenger small enough to use them.
Page 50 Essential Safety Equipment Child Restraint Holding a child in your arms while the WARNING vehicle is moving is extremely dangerous. No matter how strong the Use the correct size child-restraint person may be, he or she cannot hold system: onto a child in a sudden stop or For effective protection in vehicle collision and it could result in serious accidents and sudden stops, a child...
Page 51 Essential Safety Equipment Child Restraint Vehicles with a front passenger air bag In a collision, the force of a deploying have the following warning label. The air bag could cause serious injury or warning label reminds you not to put a death to the child.
Page 52 Essential Safety Equipment Child Restraint Luggage or other items are placed on It is dangerous to allow anyone to lean over to or against the side window, the the seat with the child in the area of the front passenger seat, the child-restraint system.
Page 53 Essential Safety Equipment Child Restraint NOTE Your Mazda is equipped with ISOFIX/ LATCH lower anchors for attachment of specially designed ISOFIX/LATCH child-restraint systems on the rear seats. When using these anchors to secure a child-restraint system, refer to "Using ISOFIX Lower Anchor (Mexico)/Using LATCH Lower Anchor (Except Mexico)"...
Page 54: Child-Restraint System Installation
Essential Safety Equipment Child Restraint Child-Restraint System Installation ▼ Categories of Child-Restraint Systems NOTE When purchasing, ask the manufacturer of the child-restraint system which type of child-restraint system is appropriate for your child and vehicle. (Mexico) Child-restraint systems are classiﬁed into the following 5 groups according to the UN-R 44 and UN-R 129 regulation.
Page 55 Essential Safety Equipment Child Restraint Due to variations in the design of of the seat belt system around the  child-restraint systems, vehicle seats child's body. and seat belts, all child-restraint Equal to Group 2 and 3 of the UN-R systems may not ﬁt all seating 44 and UN-R 129 regulation.
Page 56: Child-Restraint System Suitability For Various Seat Positions Table
Essential Safety Equipment Child Restraint Child-Restraint System Suitability for Various Seat Positions Table ▼ Child-Restraint System Suitability for Various Seat Positions Table (Mexico) Provided information in the table shows your child-restraint system suitability for various seating position. For installation suitability of other manufacturer child-restraint system, carefully consult the manufacturer's instructions which accompany the child-restraint system.
Page 57 Essential Safety Equipment Child Restraint Seating position Passenger Rear (Left) Rear (Center) Rear (Right) i-Size seating posi- Yes（i-U） Yes（i-U） tion (Yes/No) Largest suitable rearward facing ﬁx- Yes (IL) Yes (IL) ture (R1) Largest suitable rearward facing ﬁx- Yes (IL) Yes (IL) ture (R2) Largest suitable rearward facing ﬁx-...
Page 58 X = Child-restraint system cannot be installed. Child restraint system can only be installed in the forward-facing position. A Mazda genuine child-restraint system can be installed. Regarding child-restraint systems which can be installed, refer to the accessories catalog. (Except Mexico) Regarding child-restraint systems which can be installed to your Mazda, consult an ...
Page 59: Installing Child-Restraint Systems
In your Mazda, tether. tethered child-restraint systems can only be accommodated in the three positions on the rear seat.
Page 60 Essential Safety Equipment Child Restraint Always install the head restraint and WARNING adjust it to the appropriate position after removing the child-restraint Always attach the tether strap to the system: correct tether anchor position: Driving with the head restraint Attaching the tether strap to the removed is dangerous as impact to the incorrect tether anchor position is occupant's head cannot be prevented...
Page 61 Essential Safety Equipment Child Restraint 3. Secure the child-restraint system NOTE with the lap portion of the lap/ Inspect this function before each  shoulder belt. See the use of the child-restraint system. manufacturer's instructions on the You should not be able to pull the child-restraint system for belt shoulder belt out of the retractor routing instructions.
Page 62 Essential Safety Equipment Child Restraint Always remove the head restraint and Always install the head restraint and install child-restraint system (except adjust it to the appropriate position when installing a backless booster after removing the child-restraint seat): system: Installing a child-restraint system Driving with the head restraint without removing the head restraint is removed is dangerous as impact to the...
Page 63 Mazda vehicles equipped with side death to the child. Even though you air bag will have a "SRS AIRBAG" tag may feel assured that the front...
Page 64 Essential Safety Equipment Child Restraint Always remove the head restraint and where the backless booster seat is install child-restraint system (except installed. when installing a backless booster 4. Place the child-restraint system on seat): the seat without putting your Installing a child-restraint system weight on the seat and fasten the without removing the head restraint is seat belt.
Page 65 (Mexico)/Using LATCH Lower Anchor (Except Mexico) Do not seat a child in a child-restraint system on the front passenger seat if Your Mazda is equipped with ISOFIX/ the front passenger air bag LATCH lower anchors for attachment deactivation indicator light does not...
Page 66 Essential Safety Equipment Child Restraint An unsecured child-restraint system is WARNING dangerous. In a sudden stop or a collision it could move causing serious Follow the manufacturer's injury or death to the child or other instructions for the use of the occupants.
Page 67 Essential Safety Equipment Child Restraint child-restraint system and the front 5. Secure the child-restraint system seat. using BOTH ISOFIX/LATCH lower Refer to Adjusting the Driver's Seat anchors, following the on page 2-4. child-restraint system Refer to Adjusting the Front manufacturer's instruction. Pull on Passenger's Seat on page 2-12.
Page 68 Essential Safety Equipment Child Restraint Always remove the head restraint and Refer to Head Restraints on page 2-16. install child-restraint system (except when installing a backless booster seat): Installation on rear center seat Installing a child-restraint system The ISOFIX/LATCH lower anchors at without removing the head restraint is the center of the rear seat are much dangerous.
Page 69 Essential Safety Equipment Child Restraint Attaching the tether strap to the ISOFIX/LATCH lower anchor incorrect tether anchor position is location dangerous. In a collision, the tether strap could come off and loosen the child-restraint system. If the child-restraint system moves it could result in death or injury to the child.
Page 70: Supplemental Restraint System (Srs) Precautions
Essential Safety Equipment SRS Air Bags situations so seat belts are always Supplemental Restraint important in the following ways: System (SRS) Precautions Without seat belt usage, the air bags ▼ Supplemental Restraint System cannot provide adequate protection (SRS) Precautions during an accident. Seat belt usage is necessary to: The front and side supplemental restraint systems (SRS) include different...
Page 71 Essential Safety Equipment SRS Air Bags speciﬁed time after the ignition is Placing a child, 12 years or under, in switched ON. the front seat is dangerous. The child could be hit by a deploying air bag and be seriously injured or even killed. A sleeping child is more likely to lean against the door and be hit by the side air bag in moderate collision to the...
Page 72 Essential Safety Equipment SRS Air Bags Do not sit too close to the driver and Attaching objects to the air bags or front passenger air bags: placing something in the area where Sitting too close to the driver and front the air bags deploy is dangerous.
Page 73 Do not modify a front door or leave dangerous. If the vehicle's height or any damage unrepaired. Always have the suspension is modiﬁed, the vehicle an Authorized Mazda Dealer inspect a damaged front door: will be unable to accurately detect a collision or roll-over accident resulting...
Page 74 An Authorized which could result in serious injury or Mazda Dealer can provide the special death. care needed in the removal and installation of front seats. It is...
Page 75 Should you sell your Mazda, we urge  you to tell the new owner of its air bag systems and that familiarization...
Page 76: Supplemental Restraint System Components
Essential Safety Equipment SRS Air Bags Supplemental Restraint System Components ▼ Supplemental Restraint System Components (With Driver and Front Passenger Occupant Classiﬁcation System) 1. Side and curtain inﬂators and air bags 2. Side crash sensors 3. Roll-over sensor, crash sensors, and diagnostic module (SAS unit) 4.
Page 77 Essential Safety Equipment SRS Air Bags 13.Driver seat slide position sensor (page 2-68) (Without Driver and Front Passenger Occupant Classiﬁcation System) 1. Side and curtain inﬂators and air bags 2. Side crash sensors 3. Driver/Front passenger inﬂators and air bags 4.
Page 78 ▼ How the SRS Air Bags Work mainly to the driver's head or chest caused by directly hitting the steering Your Mazda is equipped with the wheel. following types of SRS air bags. SRS air For more details about air bag bags are designed to work together deployment, refer to "SRS Air Bag...
Page 79 Essential Safety Equipment SRS Air Bags ▼ Front Passenger Air Bag For more details about air bag deployment, refer to "SRS Air Bag The front passenger air bag is mounted Deployment Criteria" (page 2-64). in the front passenger dashboard. The inﬂation mechanism for the front passenger air bag is the same as the driver's air bag.
Page 80 Essential Safety Equipment SRS Air Bags passenger occupant classiﬁcation In a side impact: system (page 2-68). Greater than moderate impact to one side of the vehicle will cause the curtain air bag on that side only to inﬂate. Rear seat side air bags The rear seat side air bags are installed in the rear pillars.
Page 81: Srs Air Bag Deployment Criteria
Essential Safety Equipment SRS Air Bags SRS Air Bag Deployment Criteria ▼ SRS Air Bag Deployment Criteria This chart indicates the applicable SRS equipment that will deploy depending on the type of collision. (The illustrations are the representative cases of collisions.) Types of collision SRS equip- A roll-over/near...
Page 82 Essential Safety Equipment SRS Air Bags Types of collision SRS equip- A roll-over/near A severe frontal/near frontal A severe side col- ment A rear collision collision lision roll-over Front seat belt preten- sioner Rear seat belt preten- sioner Driver air ―...
Page 83: Limitations To Srs Air Bag
Essential Safety Equipment SRS Air Bags enough to deploy the SRS air bag Limitations to SRS Air Bag equipment. ▼ Limitations to SRS Air Bag Impacts involving trees or poles In severe collisions such as those described previously in "SRS Air Bag Deployment Criteria", the applicable SRS air bag equipment will deploy.
Page 84 Essential Safety Equipment SRS Air Bags not be detected as severe enough to pretensioners and curtain air bags may deploy the SRS air bag equipment. not deploy. Side impacts involving trees or poles Pitch end over end Side impacts with two-wheeled vehicles Roll-over (Without Front Passenger Occupant Classiﬁcation System)
Page 85: Driver And Front Passenger Occupant Classification System
Essential Safety Equipment SRS Air Bags the front passenger air bag Driver and Front deactivation indicator light illuminates. Passenger Occupant To reduce the chance of injuries caused by deployment of the front Classiﬁcation System passenger air bag, the system deactivates the front passenger front ▼...
Page 86 ON. The light turns off after a consult an Authorized Mazda Dealer few seconds. Then, the indicator light as soon as possible. The system may illuminates or is off under the following not work properly in an accident.
Page 87 Essential Safety Equipment SRS Air Bags A front passenger is seated as shown A rear passenger pushes up on the in the following ﬁgure: front passenger seat with their feet. Luggage or other items placed under the front passenger seat or between the front passenger seat and driver seat that push up the front passenger seat bottom.
Page 88 Authorized Mazda Adjust the front seats as far back as Dealer as soon as possible. possible and always sit upright against the seatbacks with seat belts worn properly.
Page 89: Constant Monitoring
Air bag modules  possible. Consult an Authorized Seat belt pretensioners  Mazda Dealer as soon as possible. Air bag/Seat belt pretensioner  system warning light ▼ Driver and Front Passenger Buckle Related wiring ...
Page 90: Before Driving
Before Driving Use of various features, including keys, doors, mirrors and windows. Keys........3-2 Security System.......3-43 Keys........3-2 Modiﬁcation and Add- Keyless Entry System....3-4 On Equipment.....3-43 Immobilizer System....3-43 Theft-Deterrent System ..3-45 Advanced Keyless Entry System........3-9 Advanced Keyless Entry Driving Tips......3-47 System .........
Page 91 The key (transmitter) contacts or is covered by a metal object. The key (transmitter) is near electronic devices such as personal computers. Non-Mazda genuine electronic equipment is installed in the vehicle. There is equipment which discharges radio waves near the vehicle.
Page 92 If your key (auxiliary key) is lost, consult an Authorized Mazda Dealer and have your code number ready. 1. Key code number plate Installing the auxiliary key 1.
Page 93: Keyless Entry System
Refer to Ignition Not Switched Off Additional keys can be obtained at (STOP) Warning Beep on page  an Authorized Mazda Dealer. Up to 7-37. 6 keys can be used with the keyless Key Removed from Vehicle Warning ...
Page 94 If the lock button is pressed with all Refer to the Settings section in the the doors and liftgate closed, the Mazda Connect Owner's Manual. hazard warning lights will ﬂash and The operation indicator light ﬂashes the theft-deterrent system is armed.
Page 95  the doors, liftgate, and fuel-ﬁller lid when pressing the unlock button once. Refer to the Settings section in the Mazda Connect Owner's Manual. (Auto re-lock function)  Panic button After unlocking with the key, all the If you witness from a distance doors, liftgate, and fuel-ﬁller lid will...
Page 96 Before Driving Keys 2 minutes and 30 seconds, and the warning lights and sound operate following will occur: one time. 1. Press any of the buttons on the The horn sounds intermittently.  transmitter to make sure that the The hazard warning lights ﬂash. ...
Page 97 Before Driving Keys With the advanced keyless function 1. Interior antenna 2. Operational range Without the advanced keyless function 1. Interior antenna 2. Operational range NOTE The engine may not start if the key is placed in the following areas: Around the dashboard ...
Page 98: Advanced Keyless Entry System
If the system is deactivated, you will be unable to start WARNING the engine by carrying the key. Consult an Authorized Mazda Dealer for Radio waves from the key may affect details. If the advanced keyless entry medical devices such as pacemakers:...
Page 99: Operational Range
Before Driving Advanced Keyless Entry System Next to a communication device Operational Range  such as a mobile phone ▼ Operational Range ▼ Locking Using Door-Lock Switch/ Unlocking Using Electric Liftgate The system operates only when the Opener driver is in the vehicle or within operational range while the key is being carried.
Page 100: Door Locks
Before Driving Doors and Locks After closing the doors and the Door Locks liftgate, always verify that they are securely closed: ▼ Door Locks Doors and the liftgate not securely closed are dangerous, if the vehicle is WARNING driven with a door and the liftgate not securely closed, the door and the Always take all children and pets with liftgate could open unexpectedly...
Page 101 Before Driving Doors and Locks In the storage compartments such This system automatically unlocks the  as the glove compartment or the doors, fuel-ﬁller lid, and liftgate in center console the event the vehicle is involved in an Next to a communication device accident to allow passengers to get ...
Page 102 Before Driving Doors and Locks Unlocking NOTE If you attempt to open the driver’s door using an unauthorized auxiliary key, the key cylinder will spin around but the door will not unlock. ▼ Locking, Unlocking with Touch Sensor, Door Handle (With the advanced keyless function) The system may not operate normally ...
Page 103 The volume of the beep sound can (Unlocking from the driver's door) also be changed. Refer to the The following locations are unlocked Settings section in the Mazda by touching the sensing area of the Connect Owner's Manual. door release touch sensor of the (With theft-deterrent system) ...
Page 104 ﬂash for conﬁrmation. The time required for the doors to lock automatically can be changed. Refer to the Settings section in the Mazda Connect Owner's Manual. ▼ Locking, Unlocking with Transmitter The following locations can be locked/ unlocked by operating the keyless 1.
Page 105 Before Driving Doors and Locks In addition, the liftgate automatically NOTE closes after locking. To prevent the transmitter from being  left in the vehicle, make sure that you carry the transmitter before locking. After locking by pressing the  door-lock switch and when the liftgate is closed last with the transmitter left in the vehicle, only...
Page 106 All the doors are closed.  can be changed. Refer to the Settings section in the (With theft-deterrent system) Mazda Connect Owner's Manual. When locking, a beep sound operates 1 time. ▼ Locking, Unlocking with When the liftgate closes, the hazard Door-Lock Knob warning lights operate 1 time.
Page 107 Before Driving Doors and Locks This does not operate the other door This does not operate the other door locks. locks. 1. Unlocked: Red indicator 2. Lock 3. Unlock Operation from outside To lock any door using its door-lock knob from the outside, press the door-lock knob to the lock position and close the door (holding the door handle in the open position is not...
Page 108 Before Driving Doors and Locks For child safety, switch the child safety Liftgate lock on both rear doors to the lock side. ▼ Liftgate When opening a rear door with the child safety lock switched to the lock WARNING side, pull the outer door handle with the lock knob inside the vehicle Never allow a person to ride in the switched to the unlock side.
Page 109 Do not modify or replace the liftgate CAUTION damper stay. Consult an Authorized Before opening the liftgate, remove Mazda Dealer if a liftgate damper stay is deformed or damaged for any snow and ice accumulation on it. reasons such as a collision or if there Otherwise, the liftgate could close is some other problem.
Page 110 Before Driving Doors and Locks The liftgate can be closed when the For the power liftgate operation, refer  doors are locked with the key left in to Power Liftgate on page 3-22. the vehicle. However, to prevent locking the key in the vehicle, the liftgate can be opened by pressing the electric liftgate opener.
Page 111 Before Driving Doors and Locks ▼ Power Liftgate Allowing children to operate the power liftgate switch and the keyless The power liftgate opens/closes entry system is dangerous. Children are electrically by operating the switches in not aware of the dangers of people the vehicle or the buttons on the getting ﬁngers and hands caught in a keyless entry system transmitter.
Page 112 Before Driving Doors and Locks Refer to Transmitter on page 3-5. NOTE Do not apply unnecessary force to NOTE  the power liftgate when it is When opening the liftgate by  opening/closing electrically. pressing the power liftgate button on Unnecessary force on the liftgate the transmitter, the liftgate can be may cause it to reverse direction of...
Page 113 Before Driving Doors and Locks A beep sound is activated, and the Operation from outside (To close) liftgate moves in the reverse Press the power liftgate close switch direction automatically and closes. while the liftgate is fully opened. The When the liftgate is closing ...
Page 114 Before Driving Doors and Locks Automatic open/close stop function When the door-lock switch on the liftgate is pressed, the liftgate The liftgate can be stopped at a automatically closes. desired position while it is opening/ Changing the power liftgate fully closing automatically.
Page 115 Before Driving Doors and Locks liftgate's path, the liftgate will move in 1. Sensor the reverse direction automatically and stops. NOTE The jam-safe equipment does not WARNING activate during easy closure operation when the power liftgate is between the Always check the area around the near-shut position and fully closed power liftgate before opening/closing position.
Page 116: Fuel And Engine Exhaust Precautions
Stop using gasohol of any kind if your vehicle engine is performing poorly. Never add fuel system additives other than a Mazda genuine product, otherwise the emission control system could be damaged. Consult an Authorized Mazda Dealer for details.
Page 117 If you USE ONLY UNLEADED FUEL. smell exhaust gas inside the vehicle, Do not drive your Mazda with any keep all windows fully open and sign of engine malfunction. contact an Authorized Mazda Dealer Do not coast with the ignition...
Page 118: Fuel-Filler Lid And Cap
Before Driving Fuel and Emission Open the windows or adjust the Fuel-Filler Lid and Cap heating or cooling system to draw fresh air when idling the engine: ▼ Fuel-Filler Lid and Cap Exhaust gas is dangerous. When the vehicle is stopped with the windows WARNING closed and the engine running for a long time even in an open area,...
Page 119 Fuel and Emission However, when the driver's door  CAUTION is locked using the following Always use only a genuine Mazda functions, the fuel lid is also locked at the same time. fuel-ﬁller cap or an approved equivalent, available at an Auto lock/unlock function ...
Page 120 Before Driving Fuel and Emission 7. To close, press the fuel-ﬁller lid CAUTION until a click sound is heard. (U.S.A. and Canada) If the check fuel cap warning light illuminates, the fuel-ﬁller cap may not be properly installed. If the warning light illuminates, park your vehicle safely off the right-of-way, remove the fuel-ﬁller cap and reinstall it correctly.
Page 121 Before Driving Mirrors 2. Press the adjustment switch to Mirrors adjust the angle of the outside mirror. ▼ Mirrors Before driving, adjust the inside and outside mirrors. ▼ Outside Mirrors WARNING Be sure to look over your shoulder before changing lanes: Changing lanes without taking into account the actual distance of the vehicle in the convex mirror is...
Page 122 Before Driving Mirrors 2. Press the select switch for the WARNING outside mirror to be tilted downward to turn on the indicator Do not touch a power folding outside light of the select switch. mirror while it is moving: 3. Shift the selector lever to the R Touching the power folding outside position to tilt the outer mirror on mirror when it is moving is dangerous.
Page 123 The automatic folding function can  be turned on or off. Refer to the Settings section in the Mazda Connect Owner's Manual. In the following cases, the outside  mirrors do not fold out automatically. Press the outside mirror folding switch to fold out the outside mirrors.
Page 124 Before Driving Mirrors ▼ Rearview Mirror Reducing glare from headlights Manual day/night mirror WARNING Push the day/night lever forward for day driving. Pull it back to reduce glare Do not stack cargo or objects higher of headlights from vehicles at the rear. than the seatbacks: Cargo stacked higher than the seatbacks is dangerous.
Page 125 Before Driving Mirrors 1. Light sensor (With Homelink wireless control  system) For information regarding the 3 buttons ( , , ) on the auto-dimming mirror. Refer to HomeLink Wireless Control System on page 4-61. The auto-dimming function is  canceled when the ignition is switched ON and the shift lever/ selector lever is in the R position.
Page 126: Power Windows
Before Driving Windows If the person's hand or head hits Power Windows something outside the vehicle, or sudden braking is applied, it could ▼ Power Windows result in serious injury or death. The windows can be opened/closed by operating the power window NOTE switches.
Page 127 Before Driving Windows position while children are in the 2. Open vehicle. NOTE Master control switches A power window may no longer  open/close if you continue to press the switch for a long time. If the power window does not open/ close, wait for a while and then operate the switch again.
Page 128 Before Driving Windows 2. Make sure that the power window 4. Continue pulling up the switch to lock switch located on the driver's fully close the window. door is not depressed. ▼ Remote Power Window Operation 3. Press the switch and fully open the window.
Page 129: Panorama Sunroof
Before Driving Windows In this case, the jam-safe function Panorama Sunroof cannot prevent the panorama sunroof from closing. If ﬁngers are caught, ▼ Panorama Sunroof serious injuries could occur. The panorama sunroof can be opened or closed when operating the CAUTION overhead tilt/slide switch at the front seats.
Page 130 ▼ Sunshade closed so that water does not get inside the cabin area. The sunshade can be opened or closed After washing your Mazda or after it  electrically only when the ignition is rains, wipe the water off the switched ON.
Page 131 Before Driving Windows ▼ Jam-safe Panorama Sunroof 2. Close (Tilt down) If a person's hands, head or an object Slide Operation blocks the panorama sunroof while it is closing, the panorama sunroof will When pulling the tilt/slide switch stop and move in the open direction. rearward 2 times, the sunshade and the panorama sunroof open.
Page 132: Modification And Add-On Equipment
The immobilizer system allows the Equipment engine to start only with a key the system recognizes. Mazda cannot guarantee the immobilizer and the theft-deterrent If someone attempts to start the system's operation if the system has engine with an unrecognized key, the been modiﬁed or if any add-on...
Page 133 Always keep a spare key in case one  is lost. If a key is lost, consult an The system is disarmed when the Authorized Mazda Dealer as soon as ignition is switched ON with the possible. correct programmed key. The security If you lose a key, an Authorized ...
Page 134: Theft-Deterrent System
Before Driving Security System NOTE Theft-Deterrent System If the battery goes dead while the  ▼ Theft-Deterrent System theft-deterrent system is armed, the horn will activate and the hazard If the theft-deterrent system detects an warning lights will ﬂash when the inappropriate entry into the vehicle, battery is charged or replaced.
Page 135 Before Driving Security System ▼ To Stop the Alarm The system will disarm if one of the  following operations takes place A triggered alarm can be turned off within 20 seconds after pressing the using any one of the following lock button: methods: Unlocking any door.
Page 136: Break-In Period
(600 miles) may add to the Environment performance, economy, and life of the vehicle. How you operate your Mazda determines how far it will travel on a Do not race the engine.  tank of fuel. Use these suggestions to Do not maintain one constant ...
Page 137: Hazardous Driving
Before Driving Driving Tips Hazardous Driving WARNING ▼ Hazardous Driving Never stop the engine when going down a hill: Stopping the engine when going down WARNING a hill is dangerous. This causes the loss of power steering and power brake Be extremely careful if it is necessary control, and may cause damage to the to downshift on slippery surfaces:...
Page 138: Floor Mat
▼ Floor Mat  to press down on the brake pedal. We recommend the use of Genuine Refer to Antilock Brake System (ABS) Mazda ﬂoor mats. on page 4-77. If you get stuck, select a lower gear  WARNING and accelerate slowly. Do not spin the front wheels.
Page 139: Rocking The Vehicle
Do not spin the wheels at more than Ask an Authorized Mazda Dealer to 56 km/h (35 mph), and do not allow check the following: anyone to stand behind a wheel when...
Page 140 Install the chains on the front tires only. wheels: Do not use chains on the rear tires. Using tires different in size or type is Please consult an Authorized Mazda dangerous. Your vehicle's handling Dealer. could be greatly affected and result in Installing the chains an accident.
Page 141: Driving In Flooded Area
CAUTION Do not drive the vehicle on ﬂooded roads as it could cause short circuiting of electrical/electronic parts, or engine damage or stalling from water absorption. If the vehicle has been immersed in water, consult an Authorized Mazda Dealer. 3-52...
Page 142: Driving On Uneven Road
Before Driving Driving Tips Driving on Uneven Road Turbocharger Information (SKYACTIV-G 2.5T) ▼ Driving on Uneven Road ▼ Turbocharger Information Your vehicle's suspension and (SKYACTIV-G 2.5T) underbody can be damaged if driven on rough/uneven roads or over speed bumps at excessive speeds. Use care CAUTION and reduce speed when traveling on rough/uneven roads or over speed...
Page 143: Trailer Towing (U.s.a. And Canada)
Never overload your vehicle or trailer. Consult an Authorized Mazda Dealer if you need further details. CAUTION Do not tow a trailer during the ﬁrst 1,000 km (600 miles) of your new Mazda. If you do, you may damage the engine, transmission, differential, wheel bearings, and other power-train components.
Page 144 Before Driving Towing GAWR and GVWR Do not exceed front and rear GAWR (gross axle weight rating) and GVWR (gross vehicle weight rating). If you do, vehicle handling, braking, and performance will be affected. These values are also on the Motor Vehicle Safety Standard Label posted on the driver's door frame.
Page 145 Before Driving Towing Model Item SKYACTIV-G 2.5 SKYACTIV-G 2.5T Tongue load TRAILER-TONGUE Tongue load/Trailer load × 100 = 10 % LOAD to 15 % Trailer load Front 60 % DISTRIBUTION OF TRAILER LOAD Rear 40 % WARNING Always keep tow loads within speciﬁed limits as indicated in the Trailer Towing-Load Table: Attempting to tow loads greater than those speciﬁed is dangerous as it may cause serious handling and performance problems that could result in personal injury or...
Page 146 Before Driving Towing ▼ Trailer Hitch Use only a hitch ball recommended by the trailer manufacturer that conforms to the gross trailer weight requirement. When not towing a trailer, remove the trailer hitch (if detachable) to reduce the possibility of damage as a result of the vehicle being rear-ended. WARNING Always make sure the trailer hitch is securely attached before departure: An unsecured trailer hitch is dangerous as it causes greater trailer sway from...
Page 147 CAUTION Do not connect a trailer lighting system directly to the lighting system of your Mazda. This may damage your vehicle's electrical system and lighting systems. Have a recreational vehicle dealer or trailer rental agency connect the system, and inspect the brake lights and turn signals yourself before each trip.
Page 148 Stop and re-inspect all lights and connections after driving a short distance. Driving Your Mazda will handle differently with a trailer in tow, so practice turning,  backing, and stopping in a traffic-free area. Take time to get accustomed to the extra weight and length.
Page 149 Before Driving Towing Steer straight ahead. If no extreme correction of steering or braking is made, the combination of less speed and ﬁrm steering will result in stability. Backing up Backing a vehicle with a trailer requires practice and patience. Back slowly, and have a helper outside at the rear of the trailer to reduce the risk of an accident.
Page 150 Before Driving Towing 4. Firmly apply the parking brake. 5. Shift the transmission into P, and stop the engine. To restart after parking on an incline: 1. With the transmission in P, start the engine. (Be sure to depress and hold the brake pedal.) 2.
Page 151: Recreational Towing
Before Driving Towing Recreational Towing ▼ Recreational Towing An example of "recreational towing" is towing your vehicle behind a motorhome. The transmission is not designed for towing this vehicle on all 4 wheels. When doing recreational towing refer to "Towing Description" (page 7-17) and "Tiedown Hooks"...
Page 152: When Driving
Automatic Transmission... 4-36 Trailer Stability Control Automatic Transmission (TSC)........4-81 Controls......4-36 Shift-Lock System....4-37 Transmission Ranges.... 4-38 Mazda intelligent Drive Select (Mi- Manual Shift Mode....4-40 Drive)........4-82 Direct Mode .......4-46 Mazda intelligent Drive Select Driving Tips......4-47 (Mi-Drive) (FWD) ....
Page 153 Tire Pressure Monitoring System Rear Cross Traffic Alert (RCTA) ..(TPMS)........ 4-202 ........4-113 Tire Pressure Monitoring System Mazda Radar Cruise Control with (TPMS)......4-202 Stop & Go function (MRCC with Stop & Go function) ..4-117 Rear View Monitor....4-206 Traffic Jam Assist (TJA) ..
Page 154 MEMO...
Page 155: Ignition Switch
When Driving Start/Stop Engine Ignition Switch WARNING ▼ Push Button Start Positions Before leaving the driver's seat, always switch the ignition off, set the The system operates only when the key parking brake, and make sure the is within operational range. selector lever is in P position: Each time the push button start is Leaving the driver's seat without...
Page 156: Starting The Engine
If the system is deactivated, you will be unable to start the engine by carrying the key. Consult an Authorized Mazda Dealer for details. If the push button start system functions have been deactivated, you can start the engine by following the procedure indicated when the key battery goes dead.
Page 157 7-26. depressed sufficiently. Have your vehicle inspected at an 6. Make sure that the KEY indicator Authorized Mazda Dealer as soon light (green) in the instrument as possible. cluster and push button start indicator light (green) turns on.
Page 158 (page 7-26). Have your accelerator. vehicle inspected at an If the engine does not start the  Authorized Mazda Dealer as ﬁrst time, refer to Starting a soon as possible. If this occurs, Flooded Engine under Emergency the engine can be force-started.
Page 159 If it does not (N). illuminate, have the vehicle 3. Make sure that the push button checked at an Authorized Mazda start indication light (green) ﬂashes. Dealer. 4. Align the center area of the To switch the ignition position emblem on the transmitter with the ...
Page 160: Turning The Engine Off
Do not stop the engine while the Have your vehicle inspected at an vehicle is moving: Authorized Mazda Dealer as soon as Stopping the engine while the vehicle possible. If this occurs, the engine can is moving for any reason other than in be force-started.
Page 161 When Driving Start/Stop Engine NOTE Cylinder Deactivation The cooling fan in the engine  ▼ Cylinder Deactivation compartment could turn on for a few minutes after the ignition is switched The cylinder deactivation is a function from ON to OFF, whether or not the designed to reduce fuel consumption A/C is on or off, to cool the engine and improve fuel economy by...
Page 162 AUTOHOLD function) (AUTOHOLD operation turned off and 1. When the brake pedal is depressed When not using Mazda Radar Cruise while the vehicle is being driven Control with Stop & Go function and the vehicle comes to a stop,...
Page 163 When Driving Start/Stop Engine continue to operate even if the The temperature setting dial of the  brake is released (except when air conditioner is in a position other driving in the R or M position than maximum heating or maximum second gear ﬁxed mode).
Page 164 When Driving Start/Stop Engine The vehicle is not driven in sport The i-stop OFF switch is pressed until   mode. the beep sounds. The automatic transmission ﬂuid The air conditioner is operated with   has warmed up sufficiently. the airﬂow mode in the The automatic transmission ﬂuid ...
Page 165  battery is replaced, the i-stop functions (prevents the vehicle from rolling must be veriﬁed. Consult an back) Authorized Mazda Dealer. When the engine restarts after  releasing the brake pedal (prevents the vehicle's sudden movement due to vehicle creep), sudden movement of the vehicle is prevented by controlling the brakes.
Page 166 When Driving Start/Stop Engine The vehicle roll prevention function 1. Release foot from brake pedal is a supplementary function which operates for a maximum of 2 seconds after releasing the brake pedal and accelerating the vehicle from an engine idling stop condition. Over reliance on the system may result in an unexpected accident if the vehicle were to suddenly...
Page 167 Have your vehicle vehicle roll prevention function. inspected by an Authorized Mazda However, this does not indicate a Dealer. malfunction. The light does not turn on when the ...
Page 168: Instrument Cluster And Display
When Driving Instrument Cluster and Display Instrument Cluster and Instrument Cluster Display ▼ Instrument Cluster ▼ Instrument Cluster and Display ① Tachometer....page 4-18 ② Multi-information Display....① Instrument Cluster..page 4-17 ........page 4-19 ② Active Driving Display..page 4-34 ③...
Page 169 When Driving Instrument Cluster and Display ▼ Tachometer The tachometer shows engine speed in thousands of revolutions per minute (rpm). CAUTION Do not run the engine with the tachometer needle in the RED ZONE. This may cause severe engine damage. 1.
Page 170 Trip meter  Outside temperature  Distance-to-empty  Average fuel economy  Current fuel economy  Mazda intelligent Drive Select (Mi-Drive) Display  i-ACTIVSENSE Display  Compass Display  Door-Ajar/Liftgate-Ajar/Hood-Ajar Warning Indication  Message Display  Displayed when opening door/liftgate/hood.
Page 171 3. i-ACTIVSENSE display 4. Message display Displayed only when a warning occurs. The type of display for the fuel economy and the maximum driving distance can be changed. Refer to the Settings section in the Mazda Connect Owner's Manual. 4-20...
Page 172 When Driving Instrument Cluster and Display ▼ Odometer, Trip Meter and Trip distance from where the fuel tank is ﬁlled. Meter Selector You can switch between the odometer When trip meter A is selected, TRIP A and trip meter display using the TRIP will be displayed.
Page 173 When Driving Instrument Cluster and Display recommend keeping the tank over 1/4 CAUTION full. When the engine coolant temperature gauge needle is in the red range, the engine coolant temperature is extremely high. Drive slowly to reduce engine load. If the engine coolant temperature gauge needle is in the red range, there is the possibility of overheating.
Page 174 When Driving Instrument Cluster and Display current dimmer setting is at The direction of the arrow (  maximum dimness. indicates that the fuel-ﬁller lid is on the left side of the vehicle. ▼ Dashboard Illumination (Without auto-light control) When the lights are turned on with the ignition switched ON, the brightness of the dashboard illumination is dimmed.
Page 175 If there is no past fuel economy  Refer to the Settings section in the information such as after ﬁrst Mazda Connect Owner's Manual. purchasing your vehicle or the ▼ Distance-to-empty information is deleted when the battery cables are disconnected, the...
Page 176 ▼ Mazda intelligent Drive Select purchased or the past data was reset. (Mi-Drive) Display The average fuel economy is calculated and displayed every 30 seconds.
Page 177 East (DSA) on page 4-111. West Refer to Driver Attention Alert (DAA)  Northeast on page 4-113. Refer to Mazda Radar Cruise Control Northwest  with Stop & Go function (MRCC Southeast with Stop & Go function) on page Southwest 4-118.
Page 178 When Driving Instrument Cluster and Display ▼ Message Display ▼ Warning/Indicator Lights A message such as the system Instrument Cluster varies depending operation status, a malfunction, or an on model and speciﬁcations. abnormality is indicated. Warning/indicator light in instrument cluster turns on/ﬂashes or symbol is indicated on display at same time as message Check the information regarding the...
Page 179 When Driving Instrument Cluster and Display ▼ Warning Indication/Warning Lights These lights turn on or ﬂash to notify the user of the system operation status or a system malfunction. Signal Warning Refer to 7-20 Brake System Warning Indication/Warning Light Electronic Brake Force Distribution System Warn-...
Page 180 When Driving Instrument Cluster and Display Signal Warning Refer to 7-24 AWD Warning Indication/Warning Light Air Bag/Front Seat Belt Pretensioner System Warning Indication/ 7-25 Warning Light Flashing 7-26 Tire Pressure Monitoring System (TPMS) Warning Indication/Warning Light Turns on 7-30 7-26 KEY Warning Indication/Warning Light (Red) High Beam Control System (HBC) Warning Indication/Warning...
Page 181 The light turns on when the ignition is switched on for an operation check, and turns off a few seconds later or when the engine is started. If the light does not turn on or remains turned on, have the vehicle inspected at an Authorized Mazda Dealer. ▼ Indication/Indicator Lights These lights turn on or ﬂash to notify the user of the system operation status or a...
Page 182 *1*2 7-23 Electric Parking Brake (EPB) Indication/Indicator Light 4-74 AUTOHOLD Active Indicator Light Mazda Radar Cruise Control with Stop & Go function (MRCC with 4-123 Stop & Go function) indicator Light 4-136 Traffic Jam Assist (TJA) indicator Light Traction Con-...
Page 183 OFF Symbol (Warning/Risk Avoidance Support Sys- 4-90 tem) 4-94 High Beam Control System (HBC) Indicator Light (Green) Mazda Radar Cruise Control with Stop & Go function (MRCC with 4-120 Stop & Go function) Standby Indication 4-130 Traffic Jam Assist (TJA) Standby Indication (White) Mazda Radar Cruise Control with Stop &...
Page 184 Mazda Connect Owner's Manual. CAUTION When the maintenance period arrives, have your vehicle inspected by an Authorized Mazda Dealer as soon as possible. If maintenance is neglected, a decrease in vehicle performance may occur which could cause damage. Have your vehicle inspected before the maintenance period arrives.
Page 185: Active Driving Display
When Driving Instrument Cluster and Display Active Driving Display ▼ Active Driving Display 1. Display 2. Dust-proof sheet WARNING Always adjust the display brightness and position with the vehicle stopped: Adjusting the display brightness and position while driving the vehicle is dangerous as doing so could distract your attention from the road ahead and lead to an accident.
Page 186 Traffic Sign Recognition System (TSR) traffic signs and Warnings  Refer to Traffic Sign Recognition System (TSR) on page 4-104. Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go  function) Operation Conditions and Warnings Refer to Mazda Radar Cruise Control with Stop &...
Page 187: Automatic Transmission Controls
When Driving Automatic Transmission Automatic Transmission Controls ▼ Automatic Transmission Controls NOTE The Sport AT has an option that is not included in the traditional automatic transmission that gives the driver the option of selecting each gear instead of leaving it to the transmission to shift gears.
Page 188: Shift-Lock System
4. Move the selector lever. out of P unless the brake pedal is Take the vehicle to an Authorized depressed. Mazda Dealer to have the system checked. To shift from P: 1. Depress and hold the brake pedal. 2. Start the engine.
Page 189: Transmission Ranges
When Driving Automatic Transmission When the selector lever is shifted to Transmission Ranges the R position with the ignition switched ON, the parking sensor ▼ Transmission Ranges system is activated and a beep sound is The shift position indication in the ...
Page 190 When Driving Automatic Transmission ▼ Active Adaptive Shift (AAS) D (Drive) D is the normal driving position. From Active Adaptive Shift (AAS) a stop, the transmission will automatically controls the transmission automatically shift through a 6-gear shift points to best suit the road sequence.
Page 191: Manual Shift Mode
When Driving Automatic Transmission ▼ Indications Manual Shift Mode ▼ Manual Shift Mode The manual shift mode gives you the feel of driving a manual transmission vehicle by allowing you to operate the selector lever manually. This allows you to control engine rpm and torque to the drive wheels much like a manual 1.
Page 192 When Driving Automatic Transmission ▼ Manually Shifting Up WARNING You can shift gears up by operating the Keep your hands on the steering selector lever or the steering shift wheel rim when using ﬁngers on the switches M1 → M2 → M3 → M4 → M5 → M6 steering shift switches: Putting your hands inside the rim of Using selector lever...
Page 193 When Driving Automatic Transmission ▼ Manually Shifting Down WARNING You can shift gears down by operating Do not use engine braking on slippery the selector lever or the steering shift road surfaces or at high speeds: switches M6 → M5 → M4 → M3 → M2→ M1 Shifting down while driving on wet, snowy, or frozen roads, or while Using selector lever...
Page 194 When Driving Automatic Transmission ▼ Second Gear Fixed Mode When the selector lever is moved back + while the vehicle speed is about 10 km/h (6.2 mph) or less, the transmission is set in the second gear ﬁxed mode. The gear is ﬁxed in second while in this mode for easier acceleration from a stop and driving on slippery roads such as snow-covered...
Page 195 When Driving Automatic Transmission ▼ Shift Gear (Shifting) Speed Limit For each gear position while in the manual mode, the speed limit is set as follows: When the selector lever is operated within the range of the speed limit, the gear is shifted.
Page 196 When Driving Automatic Transmission ▼ Recommendations for Shifting Upshifting For normal acceleration and cruising, Mazda recommends these shift points: (U.S.A. and Canada) Gear Vehicle speed M1 to M2 24 km/h (15 mph) M2 to M3 40 km/h (25 mph) M3 to M4...
Page 197: Direct Mode
When Driving Automatic Transmission NOTE Direct Mode Shifting up and down while in direct mode may not be possible depending ▼ Direct Mode on the vehicle speed. In addition, Direct mode can be used for because direct mode is canceled temporarily switching gears by (released) depending on the rate of operating the steering shift switch...
Page 198 When Driving Automatic Transmission 3. Release the brake pedal while Driving Tips gradually accelerating. ▼ Driving Tips Descending steep grades When descending a steep grade, shift WARNING to lower gears, depending on load weight and grade steepness. Descend Do not let the vehicle move in a slowly, using the brakes only direction opposite to the direction occasionally to prevent them from...
Page 199: Lighting Control
30 seconds after switching the ignition off. The time setting can be changed. Refer to the Settings section in the Mazda Connect Owner's Manual. To prevent discharging the battery, do not leave the lights on while the engine is ...
Page 200 When Driving Switches and Controls When the light switch is switched to a different position from the OFF, position while the vehicle is stopped, the daytime running lights turn off. When starting to drive the vehicle, the daytime running lights turn on again. When the light switch is switched to the OFF position, and then to the position again, the daytime running lights turn off directly after starting the engine.
Page 201 The sensitivity of the auto-light control may be changed.  Refer to the Settings section in the Mazda Connect Owner's Manual. 4-50 *Some models.
Page 202  after all of the doors are closed can be changed. Refer to the Settings section in the Mazda Connect Owner's Manual. If no operations are done for 3  minutes after the lever is pulled, the headlights turn off.
Page 203 NOTE (Except Canada) The daytime running lights can be deactivated. Refer to the Settings section in the Mazda Connect Owner's Manual. 1. Lock button 2. Unlock button NOTE Operation of the leaving home light  can be turned on or off.
Page 204: Turn And Lane-Change Signals
ﬂash ▼ Turn and Lane-Change Signals abnormally. Have your vehicle The ignition must be switched ON to inspected by an Authorized Mazda use the turn and lane-change signals. Dealer. A personalized function is available ...
Page 205: Windshield Wipers And Washer
OFF, consult Using windshield washer ﬂuid without an Authorized Mazda Dealer as soon anti-freeze protection in freezing as possible. weather conditions is dangerous as it could freeze on the windshield and ▼...
Page 206 When Driving Switches and Controls Switch Posi- Switch Posi- Wiper operation Wiper operation tion tion Operation while pulling up lev- Operation while pulling up lev- MIST MIST Stop Stop Intermittent Auto control AUTO Low speed Low speed High speed High speed Variable-speed intermittent wipers When the wiper lever is switched to the AUTO position, the indicator light turns on.
Page 207 When Driving Switches and Controls NOTE CAUTION Switching the auto-wiper lever from  Do not shade the rain sensor by the OFF to the AUTO position while adhering a sticker or a label on the driving activates the windshield windshield. Otherwise the rain wipers once, after which they sensor will not operate correctly.
Page 208: Rear Window Wiper And Washer
The auto-wiper control functions can  be turned off. Refer to the Settings section in the Mazda Connect Owner's Manual. ▼ Windshield Washer Pull the wiper lever toward you to spray washer ﬂuid and operate the windshield wipers several times. The washer ﬂuid is sprayed only while the...
Page 209: Rear Window Defogger
▼ Rear Window Defogger does not work, consult an Authorized The rear window defogger clears fog Mazda Dealer. from the rear window. The ignition must be switched ON to use the defogger. Press the switch to turn on the rear window defogger.
Page 210 1. Indicator light OFF. ▼ Mirror Defogger Refer to the Settings section in the Mazda Connect Owner's Manual. The mirror defoggers defrost the outside mirrors. ▼ Windshield Wiper De-icer The thermal ﬁlaments at the following...
Page 211: Hazard Warning Flasher
When Driving Switches and Controls Horn Hazard Warning Flasher ▼ Horn ▼ Hazard Warning Flasher The hazard warning lights should To sound the horn, press the always be used when you stop on or mark on the steering wheel. near a roadway in an emergency. The hazard warning lights warn other drivers that your vehicle is a traffic hazard and that they must take...
Page 212: Homelink Wireless Control System
For further information, contact HomeLink at www.homelink.com or ▼ HomeLink Wireless Control www.youtube.com/HomeLinkGentex System or an Authorized Mazda Dealer. NOTE Always check the areas surrounding HomeLink and HomeLink house are garage doors and gates for people or registered trademarks of Gentex obstructions before programming or Corporation.
Page 213 When Driving Switches and Controls 1. Press and release the HomeLink If the indicator light ﬂashes  button you would like to program. rapidly in green, ﬁrmly press and The indicator light ﬂashes slowly in hold the Homelink button and amber when the button is pressed.
Page 214 When Driving Switches and Controls 8. If the status indicator arrows are the HomeLink System with the ﬂashing, refer to Garage Door following: Two-Way Communication. NOTE If programming a garage door opener or gate operator, it is advised to unplug the device during the “cycling”...
Page 215 When Driving Switches and Controls ▼ Erasing Programmed HomeLink Programming two-way communication Buttons Within ﬁve seconds after programming NOTE a new HomeLink button, both of the garage door status indicator lights will All of the programmed HomeLink  ﬂash rapidly in green indicating that buttons are reset.
Page 216 When Driving Switches and Controls Garage door Indicator light status Amber ﬂashes Closing Amber ﬂashes Opening Green turns on Closed Green turns on Opened NOTE The programming will not be erased even if the battery is disconnected. 4-65...
Page 217: Brake System
When Driving Brake Driving with wet brakes is dangerous. Brake System Increased stopping distance or the vehicle pulling to one side when ▼ Foot Brake braking could result in a serious This vehicle has power-assisted brakes accident. Light braking will indicate that adjust automatically through whether the brakes have been normal use.
Page 218 When Driving Brake turns off when releasing the parking When the charging system warning  brake. light in the instrument cluster turns on, the parking brake cannot be applied after switching the ignition OFF. Before switching the ignition OFF, apply the parking brake manually.
Page 219 When Driving Brake Refer to Selector Lever Operation on and the EPB switch indicator light turn page 4-36. off. Manual operation Applying the parking brake manually When the brake pedal is ﬁrmly depressed and the EPB switch is pulled up, the parking brake is applied regardless of the ignition position.
Page 220 When Driving Brake with the parking brake applied and all NOTE of the following conditions met, the If something such as the driver’s  parking brake is released automatically. foot contacts the accelerator When the parking brake is released, pedal with the engine running the EPB indicator light in the and the parking brake applied, instrument cluster and the EPB switch...
Page 221 When Driving Brake following after switching the ignition How to use Emergency Brake from ON to OFF. If there is a problem with the brake Auto operation cancel method 1 system (foot brake) while driving the vehicle or in an emergency situation 1.
Page 222 The brake assist equipment does not  supersede the functionality of the When you hear this noise, consult an vehicle's main braking system. Authorized Mazda Dealer as soon as possible. ▼ Brake Override System The brake override system applies the WARNING brake ﬁrst for safety if the brake pedal...
Page 223 When Driving Brake AUTOHOLD ▼ AUTOHOLD The AUTOHOLD function automatically holds the vehicle stopped, even if you take your foot off the brake pedal. This function can be best used while stopped in traffic or at a traffic light. The brakes are released when you start driving the vehicle. WARNING Do not rely completely on the AUTOHOLD function: The AUTOHOLD function is only designed to assist the brake operation while the...
Page 224 NOTE Under the following conditions, a problem with the AUTOHOLD is occurring.  Have your vehicle inspected at an Authorized Mazda Dealer as soon as possible. A message is indicated on the multi-information display and a warning sound is ...
Page 225 When Driving Brake ▼ To Turn On AUTOHOLD System NOTE When all of the following conditions Press the AUTOHOLD switch and are met, the AUTOHOLD operates and when the AUTOHOLD standby the brakes are held. indicator light turns on, the The ignition is switched ON (engine AUTOHOLD function turns on.
Page 226 When Driving Brake Under the following conditions, the NOTE  parking brake is automatically When the brakes are not held such  applied and the AUTOHOLD is as while driving the vehicle, the released. The AUTOHOLD is AUTOHOLD can be turned off only re-enabled when the conditions by pressing the AUTOHOLD switch.
Page 227: Hill Launch Assist (Hla)
When Driving Brake HLA does not operate if the parking Hill Launch Assist (HLA)  brake is applied, or if the vehicle has not stopped completely. ▼ Hill Launch Assist (HLA) While HLA is operating, the brake  The HLA functions to assist in pedal may feel stiff and vibrate, accelerating the vehicle from a stop on however, this does not indicate a...
Page 228: Antilock Brake System (Abs)
When Driving ABS/TCS/DSC/TSC NOTE Antilock Brake System Braking distances may be longer on (ABS)  loose surfaces (snow or gravel, for example) which usually have a hard ▼ Antilock Brake System (ABS) foundation. A vehicle with a normal The ABS control unit continuously braking system may require less monitors the speed of each wheel.
Page 229: Traction Control System (Tcs)
Do not rely on the Traction Control correctly. Take your vehicle to an System (TCS) as a substitute for safe Authorized Mazda Dealer. driving: NOTE The Traction Control System (TCS) cannot compensate for unsafe and In addition to the indicator light ...
Page 230 If the light remains illuminated and the TCS is not switched off, take your Press the switch again to turn the TCS vehicle to an Authorized Mazda back on. The TCS OFF indicator light Dealer. The DSC may have a will turn off.
Page 231: Dynamic Stability Control (Dsc)
When Driving ABS/TCS/DSC/TSC Use tires of the correct size Dynamic Stability Control speciﬁed for your Mazda on all 4 (DSC) wheels. Use tires of the same ▼ Dynamic Stability Control (DSC) manufacturer, brand and tread pattern on all 4 wheels.
Page 232 CAUTION The TSC may not operate correctly unless the following are observed: Use tires of the correct size speciﬁed for your Mazda on all four wheels. Use tires of the same manufacturer, brand and tread pattern on all four wheels.
Page 233 When Driving Mazda intelligent Drive Select (Mi-Drive) Pull the Mi-Drive switch back (OFF) to Mazda intelligent Drive cancel the sport mode. Select (Mi-Drive) (FWD) ▼ Mazda intelligent Drive Select (Mi-Drive) Mi-Drive is a system to switch the vehicle's drive mode. When the sport...
Page 234 When Driving Mazda intelligent Drive Select (Mi-Drive) NOTE Mazda intelligent Drive If the Mi-Drive cannot be switched to Select (Mi-Drive) (AWD) sport mode, the select mode indicator light ﬂashes to notify the driver. ▼ Mazda intelligent Drive Select (Mi-Drive) Mi-drive is a system that switches the...
Page 235 When Driving Mazda intelligent Drive Select (Mi-Drive) Vehicle stability is limited even when How to use Mi-Drive Mi-drive is activated. 1. Push the Mi-Drive switch forward Always drive the vehicle safely. Do or pull it toward you. not drive the vehicle recklessly, otherwise it may result in an accident.
Page 236 Towing mode can be selected only  when electrically connected to the trailer using a Mazda genuine trailer hitch. In addition, it may take some time until the connection is detected and towing mode is displayed.
Page 237 When Driving i-ACTIV AWD Utility and AWD vehicles are not i-ACTIV AWD Operation designed for cornering at high speeds any more than low proﬁle sports cars ▼ i-ACTIV AWD Operation are designed to perform satisfactorily AWD provides excellent drivability on under off-road conditions.
Page 238 When Driving i-ACTIV AWD NOTE Check the tire inﬂation pressure label attached to driver's door frame for the correct tire inﬂation pressure. Make sure to equip the vehicle with  genuine tires of the speciﬁed size, on all wheels. With AWD, the system is calibrated for all 4 wheels being of the same dimensions.
Page 239: Power Steering
If the steering feels stiffer than usual during normal driving or the steering vibrates, consult an Authorized Mazda Dealer. The malfunction indication/indicator  light notiﬁes the driver of system abnormalities and operation conditions.
Page 240 Inter-vehicle distance However, because each system has its limitations, always drive carefully and Mazda Radar Cruise Control with Stop do not rely solely on the systems. & Go function (MRCC with Stop & Go function)......page 4-117 ▼...
Page 241   Driver Attention Alert (DAA) drive detection  Mazda Radar Cruise Control with  The rear side radar sensors are installed Stop & Go function (MRCC with inside the rear bumper, one on the left Stop & Go function) side and one on the right side.
Page 242 When Driving i-ACTIVSENSE i-ACTIVSENSE status symbol i-ACTIVSENSE status symbol (Warning/risk avoidance support (warning/risk avoidance support system). system) (green) Lane Departure Warning System  (LDWS) Blind Spot Monitoring (BSM)  Distance & Speed Alert (DSA)  Rear Cross Traffic Alert (RCTA) ...
Page 243 (Warning/risk avoidance features. support system) in the instrument Refer to the Settings section in the cluster is displayed. Mazda Connect Owner's Manual. Lane Departure Warning System  (LDWS) Blind Spot Monitoring (BSM)  Distance & Speed Alert (DSA) ...
Page 244: Adaptive Front Lighting System (Afs)
Refer to the Settings section in the direction. Mazda Connect Owner's Manual. The vehicle is driven on roads lined  with streetlamps or on roads in well-lit cities and towns.
Page 245 Refer to the Settings section in the road and traffic conditions. Mazda Connect Owner's Manual. When there are sources of light in  the area such as streetlamps, illuminated signboards, and traffic signals.
Page 246: Lane Departure Warning System (Ldws)
When Driving i-ACTIVSENSE ▼ Manual Switching Lane Departure Warning Switching to low beams System (LDWS) Switch the headlight switch to the ▼ Lane Departure Warning System position, or press the high beam (LDWS) control switch. The HBC indicator light (green) turns The LDWS alerts the driver that the off.
Page 247 Consult an Authorized optical axis is deviated at night. Mazda Dealer for tire replacement. The road is excessively uneven.  The vehicle is shaken after hitting a ...
Page 248 When Driving i-ACTIVSENSE ▼ When the System Operates When temporarily canceling the system When the ignition is switched ON, the The LDWS goes on standby in the i-ACTIVSENSE status symbol (warning/ following cases: The LDWS operation risk avoidance support system) (white) is automatically restored when the turns on and the system goes on system's operation conditions are met.
Page 249 When Driving i-ACTIVSENSE ▼ LDWS Warning Refer to the Settings section in the Mazda Connect Owner's Manual. If the system determines that the (If the LDWS is turned off by  vehicle may deviate from its lane, a operating the i-ACTIVSENSE OFF...
Page 250: Blind Spot Monitoring (Bsm)
When Driving i-ACTIVSENSE 2. Detection areas Blind Spot Monitoring WARNING (BSM) ▼ Blind Spot Monitoring (BSM) Always check the surrounding area visually before making an actual lane The BSM is designed to assist the driver change: in checking the area to the rear of the The system is only designed to assist vehicle on both sides during lane you in checking for vehicles at your rear...
Page 251 A vehicle is traveling alongside  have the vehicle inspected at an your vehicle at nearly the same Authorized Mazda Dealer as soon as speed for an extended period of possible. time. Vehicles approaching in the ...
Page 252 Otherwise, the radar’s radio waves will be blocked causing the system to not operate normally. If a Mazda genuine trailer hitch is  1. Objects such as guardrails and used, the BSM is automatically concrete walls running alongside turned off.
Page 253 When Driving i-ACTIVSENSE ▼ Blind Spot Monitoring (BSM) BSM warning indicator lights when they turn on. Warning Indicator Lights/Display Refer to Dashboard Illumination on Indicator/Blind Spot Monitoring page 4-23. (BSM) Warning Beep Display indicator The BSM system notiﬁes the driver of the presence of vehicles in adjacent The detected approaching vehicle and lanes or at the rear of the vehicle using...
Page 254 The BSM system can be set to inoperable. (If only the BSM is turned off)  Refer to the Settings section in the Mazda Connect Owner's Manual. (If the BSM is turned off by  operating the i-ACTIVSENSE OFF switch) Refer to i-ACTIVSENSE OFF Switch on page 4-92.
Page 255: Traffic Sign Recognition System (Tsr)
When Driving i-ACTIVSENSE Traffic Sign Recognition System (TSR) ▼ Traffic Sign Recognition System (TSR) The TSR helps prevent the driver from overlooking traffic signs, and provides support for safer driving by displaying traffic signs on the active driving display/instrument cluster which are recognized by the Forward Sensing Camera (FSC) or recorded in the navigation system while the vehicle is driven.
Page 256 The TSR is not supported in some countries or regions. For information concerning  the supported countries or regions, consult an Authorized Mazda Dealer. The TSR operates only if the navigation system SD card (Mazda genuine) is  inserted in the SD card slot. Consult an Authorized Mazda Dealer for details.
Page 257 The TSR can be set to invisible on the active driving display.  Refer to the Settings section in the Mazda Connect Owner's Manual. ▼ Traffic Sign Display Indication Stop signs The following traffic signs are displayed on the active driving display/ instrument cluster.
Page 258 When Driving i-ACTIVSENSE The Forward Sensing Camera (FSC) When the Forward Sensing Camera   recognizes a speed limit sign as a (FSC) recognizes the do not enter sign targeted for your vehicle and sign and a certain period of time has the vehicle passes it.
Page 259 In addition, the warning pattern and the warning activation timing differ depending on the setting contents. Refer to the Settings section in the Mazda Connect Owner's Manual. Speed Limit Sign Alert setting Off: The excessive speed warning is not activated.
Page 260 When Driving i-ACTIVSENSE stops ﬂashing and remains on. The warning sound is activated continuously until the vehicle speed decreases below the speed limit sign. Speed Limit Sign Threshold setting + 0 km/h (+ 0 mph): If the vehicle speed exceeds the speed limit sign displayed in ...
Page 261: Distance & Speed Alert (Dsa)
Refer to the Settings section in the ahead. If you neglect to operate the Mazda Connect Owner's Manual. accelerator and brake pedals correctly, Refer to i-ACTIVSENSE OFF Switch it could lead to an accident.
Page 262: Driver Attention Alert (Daa)
When Driving i-ACTIVSENSE ▼ Vehicle Ahead Close Proximity Driver Attention Alert Warning (DAA) When the distance between your vehicle and a vehicle ahead is close, ▼ Driver Attention Alert (DAA) the i-ACTIVSENSE status symbol The DAA is a system which detects (Warning/risk avoidance support driver fatigue and decreased system) changes from green to amber...
Page 263 When Driving i-ACTIVSENSE White (yellow) lane lines are less WARNING  visible because of dirt or fading/ patchiness. Do not rely completely on DAA and The vehicle is jolted or swayed  always drive carefully: continuously by strong winds or The DAA detects driver fatigue and rough roads.
Page 264: Rear Cross Traffic Alert (Rcta)
(BSM) warning indicator lights and the displayed warning buzzer. ▼ Canceling Driver Attention Alert (DAA) The DAA can be set to not activate. Refer to the Settings section in the Mazda Connect Owner's Manual. 1. Your vehicle 2. Detection areas 4-113 *Some models.
Page 265 When Driving i-ACTIVSENSE Monitoring (BSM) warning WARNING indicator light on the door mirrors. Always check the surrounding area visually before actually putting the vehicle in reverse: The system is only designed to assist you in checking for vehicles at the rear when putting the vehicle in reverse.
Page 266 If the i-ACTIVSENSE warning indication/ warning light remains illuminated, have the vehicle inspected at an 1. Your vehicle Authorized Mazda Dealer as soon as possible. A vehicle is approaching directly  Some problem with the system ...
Page 267 Refer to Rear Side Radar Sensor on page 4-195. If a Mazda genuine trailer hitch is  used, the RCTA is automatically turned off. 4-116...
Page 268: Mazda Radar Cruise Control With Stop & Go Function (Mrcc With Stop & Go Function)
(MRCC with ahead or a vehicle following behind Stop & Go function) you. ▼ Mazda Radar Cruise Control with Do not use the system under the Stop & Go function (MRCC with following conditions. Otherwise, it Stop & Go function) may result in an accident: The vehicle is driven on roads other...
Page 269 When Driving i-ACTIVSENSE ▼ Mazda Radar Cruise Control with Do not get out of the vehicle while the stop hold control is operating. Stop & Go function (MRCC with Getting out of the vehicle while the Stop & Go function) Display...
Page 270 If your vehicle approaches a vehicle ahead while in headway control using Active driving display the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function), a warning sound is activated and a brake warning is displayed on the multi-information display.
Page 271 In the following cases, the MRCC with Stop & Go function system is canceled  when the vehicle is traveling at 30 km/h (20 mph) or less and “Mazda Radar Cruise Control Disabled Under 30 km/h” is displayed in the multi-information display.
Page 272 When Driving i-ACTIVSENSE When the vehicle speed is set, the set vehicle speed is displayed on the displays  and the MRCC standby indication (white) changes to the MRCC set indication (green). The minimum speed setting is 30 km/h (19 mph). ...
Page 273 When Driving i-ACTIVSENSE Distance-between-vehicles Indication on active driving dis- guideline Indication on multi-information (at 80 km/h (50 mph) vehicle display play speed) Medium (about 40 m (131 ft)) Short (about 30 m (98 ft)) Extremely short (about 25 m (82 ft)) Displays a pop-up image in the active driving display only when the driver operates the switch.
Page 274 When Driving i-ACTIVSENSE The DSC has operated.  The Smart Brake Support (SBS) has operated.  The frequency of the braking operation by the MRCC with Stop & Go function is  high. There is a problem in the system. ...
Page 275: Traffic Jam Assist (Tja)
When Driving i-ACTIVSENSE The TJA may not be able to detect a Traffic Jam Assist (TJA) vehicle ahead depending on the type of vehicle ahead and its conditions, ▼ Traffic Jam Assist (TJA) the weather conditions, and the road The TJA is a system which consists of a conditions.
Page 276 (rain, fog, and snow). The vehicle is driven on slippery size for the front and rear wheels. roads such as icy or snow-covered Consult an Authorized Mazda Dealer roads and unpaved roads (Tires for tire replacement. could spin causing you to lose vehicle control, or the stop hold control may not operate.)
Page 277 When Driving i-ACTIVSENSE If there is a structure on the road or White (yellow) lane lines or   an object (such as a monorail) at a vehicles ahead are less visible low height off the ground in front of because of bad weather (rain, fog, the vehicle, the system may operate.
Page 278 When Driving i-ACTIVSENSE The vehicle is shaken after hitting a NOTE  road bump. Steering assist limit warning There are various road markings or  division lines (lane markings) of If the steering assist function cannot various shapes near an keep the vehicle within the lane lines intersection.
Page 279 When Driving i-ACTIVSENSE ▼ Traffic Jam Assist (TJA) Display 1. Vehicle ahead display 2. TJA set vehicle speed Indication The TJA setting status and operation Steering assist function display conditions are indicated on the multi-information display or the active When the steering assist function driving display.
Page 280 Authorized Mazda warning is indicated on the display. Dealer. Keep a safe distance between your Refer to If a Warning Light Turns On or vehicle and a vehicle ahead.
Page 281 The headway control function of the Mazda Radar Cruise Control (MRCC) or  Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) is set to operable (if it was set to inoperable, set it to operable using the personalization function).
Page 282 When Driving i-ACTIVSENSE Setting method 1. CANCEL switch 2. RES switch 3. TJA switch 1. Press the TJA switch. The TJA standby indication (white) turns on. In addition, the TJA display indication is displayed on the multi-information display at the same time. 2.
Page 283 When the TJA switch is pressed while the Mazda Radar Cruise Control (MRCC) or  the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) system is operating, the TJA operates. In addition, when the MRCC switch is pressed while the TJA is operating, the Mazda Radar Cruise Control (MRCC) or the Mazda Radar Cruise Control with Stop &...
Page 284 When Driving i-ACTIVSENSE Distance-between-vehicles Indication on display guideline Indication on active driving dis- Indication on multi-information (at 80 km/h (50 mph) vehicle display play speed) Long (about 50 m (164 ft)) Medium (about 40 m (131 ft)) Short (about 30 m (98 ft)) Extremely short (about 25 m (82 ft)) Displays a pop-up image when the CANCEL switch is operated.
Page 285 When Driving i-ACTIVSENSE The CANCEL switch is pressed one time.  The brake pedal is depressed.  The selector lever is in the P, N, or R position.  In the following cases, the TJA cancel indication is displayed and a sound is activated one time.
Page 286 When Driving i-ACTIVSENSE NOTE If you take your hands off the steering wheel, a warning (yellow) is indicated on  the multi-information display. Then, if you continue to leave your hands off the steering wheel, a warning (red) is indicated on the multi-information display and the active driving display and a warning sound is activated.
Page 287 When Driving i-ACTIVSENSE If the steering wheel is held lightly, or depending on the road conditions, the  system determines that you have released the steering wheel even if you are holding it, and an alert is indicated on the multi-information display and the active driving display.
Page 288: Lane-Keep Assist System (Las)
When Driving i-ACTIVSENSE NOTE Lane-keep Assist System When you resume driving by pressing  (LAS) the RES switch, your vehicle does not start moving until the distance ▼ Lane-keep Assist System (LAS) between your vehicle and the vehicle The LAS provides steering assistance to ahead lengthens to the speciﬁed help the driver stay within the vehicle distance or farther.
Page 289 Consult an Authorized The road is excessively uneven.  Mazda Dealer for tire replacement. The vehicle is shaken after hitting a  road bump. NOTE A vehicle in front of your vehicle is ...
Page 290 When Driving i-ACTIVSENSE ▼ System Operation When temporarily canceling the system When the ignition is switched ON, the The LAS goes on standby in the i-ACTIVSENSE status symbol (warning/ following cases: The LAS operation is risk avoidance support system) (white) automatically restored when the turns on and the system goes on system's operation conditions are met.
Page 291 The LAS can be set to inoperable. (If only the LAS is turned off)  Refer to the Settings section in the Mazda Connect Owner's Manual. (If the LAS is turned off by operating  the i-ACTIVSENSE OFF switch) Refer to i-ACTIVSENSE OFF Switch on page 4-92.
Page 292: Emergency Lane Keeping (Elk)
When Driving i-ACTIVSENSE sound and display indications alert the Emergency Lane Keeping driver of the danger. (ELK) ▼ Emergency Lane Keeping (ELK) The ELK is a system designed to assist the driver’s steering wheel operation to avoid danger. The ELK consists of the Blind Spot Assist function to prevent your vehicle from colliding with vehicles on adjacent lanes, and the Road Keep...
Page 293 If the steering There is a vehicle on the rear sides. wheel operation assist is operated  A Mazda genuine trailer hitch is not without detecting a two-wheeled  being used. vehicle near the detecting vehicle, it could result in an accident.
Page 294  on, the system is canceled according The temperature around a rear side  to a Mazda Connect setting. radar sensor is high. Refer to the Settings section in the There is a problem with the system. ...
Page 295 When Driving i-ACTIVSENSE Multi-information display (Basic wheel needs to be turned to avoid a display) collision is displayed on the multi-information display and the active driving display, together with a warning sound activated. Multi-information display Multi-information display (i-ACTIVSENSE display) Active driving display ▼...
Page 296  Tires other than the speciﬁed size are on, the system is canceled according to a Mazda Connect setting. used, such as when tire chains or temporary spare tires are used. The vehicle is towing a camping trailer or boat trailer.
Page 297 When Driving i-ACTIVSENSE Refer to the Settings section in the System problem Mazda Connect Owner's Manual. If there is a problem with the system, the i-ACTIVSENSE warning indication/ warning light turns on and a message is indicated. Refer to i-ACTIVSENSE Warning...
Page 298 ▼ Stopping the Emergency Lane Keeping (ELK) System Operation The ELK can be set to inoperable. Refer to the Settings section in the Mazda Connect Owner's Manual. Active driving display When the ELK is canceled, the ELK OFF indicator light turns on.
Page 299: Smart Brake Support (Sbs)
When Driving i-ACTIVSENSE The vehicle is being towed or towing Smart Brake Support another vehicle. (SBS) The vehicle is driven on rough roads such as in areas where there is grass ▼ Smart Brake Support (SBS) and foliage or off-road. Refer to Stopping the Smart Brake The SBS is a system designed to detect Support (SBS) System Operation on...
Page 300 When Driving i-ACTIVSENSE If you suddenly come close to a NOTE  vehicle ahead. When any of the following  An animal, wall, or standing tree is  conditions is met, the forward detected. detection function may not operate. While the system is operating, the ...
Page 301 SBS immediately and always have the vehicle inspected by an Authorized Mazda Dealer. Refer to Stopping the Smart Brake Support (SBS) System Operation on page 4-155. Consult an Authorized Mazda Dealer for rear bumper removal/ installation. 4-150 *Some models.
Page 302 When Driving i-ACTIVSENSE Do not modify the suspension: The rearward detection function If the vehicle height or inclination is detects obstructions using the rear changed, the SBS may not operate ultrasonic sensors. In addition, if there correctly because it cannot detect is the possibility of your vehicle obstructions correctly.
Page 303 When Driving i-ACTIVSENSE The vehicle speed is about 2 km/h High or low humidity.   (2 mph) to 8 km/h (4 mph). High or low temperatures.  There is no problem with the DSC. Strong winds.   The Electric Parking Brake (EPB) is The path of travel is not ﬂat.
Page 304 When Driving i-ACTIVSENSE Collision warning sides while you are driving in reverse, you are notiﬁed of possible danger by If there is the possibility of your vehicle a warning sound and a warning colliding with a vehicle approaching indication on the display. from the rear on the left or right, or Furthermore, if the possibility of a from the rear while you are driving in...
Page 305 If the i-ACTIVSENSE warning indication/warning light remains on, have the vehicle inspected by an Authorized Mazda 1. Your vehicle Dealer as soon as possible. There is a problem with the ...
Page 306 A towing bar is installed or a trailer  Refer to the Settings section in the is connected. Mazda Connect Owner's Manual. If the system performs brake control  and the vehicle is stopped, the When the SBS is canceled, the SBS OFF system will continue to hold the indicator light turns on.
Page 307: 360° View Monitor
When Driving i-ACTIVSENSE The image from the rear of the 360° View Monitor vehicle is displayed on the center display. ▼ 360° View Monitor The image from the rear assists the The 360°View Monitor consists of the driver in checking the rear of the following functions which assist the vehicle by displaying guide lines on driver in checking the area surrounding...
Page 308 ﬂying gravel, have the camera the camera images merge are blind replaced. For camera replacement, spots where an obstruction may not be consult an Authorized Mazda Dealer. visible. In addition, the extended Consult an Authorized Mazda Dealer vehicle width lines and projected...
Page 309 (position, installation angle) type and size for the front and rear may have shifted. Always consult an wheels. Consult an Authorized Authorized Mazda Dealer to have Mazda Dealer for tire replacement. When the display is cold, images the vehicle inspected.
Page 310 360° view monitor camera are reversed images (mirror images). Free/open source software  information This product includes free/open sources. Information about the licensing and source code is available at the following URL. https://www.denso.com/ global/en/opensource/svss/ mazda/ 4-159...
Page 311 When Driving i-ACTIVSENSE ▼ Types of Images Displayed on the Screen Top view/Front view Displays the image of the area around the vehicle and the vehicle front. 1. Top view screen 2. Front view screen 3. “Check surroundings for safety.” message is displayed 4-160...
Page 312 When Driving i-ACTIVSENSE Top view/Front wide view Displays the image of the area around the vehicle and the front of the vehicle (wide-area). 1. Top view screen 2. Front wide view screen 3. “Check surroundings for safety.” message is displayed 4-161...
Page 313 When Driving i-ACTIVSENSE Side view Displays the image of the left and right sides of the vehicle. 1. Left side view screen 2. Right side view screen 3. “Check surroundings for safety.” message is displayed 4-162...
Page 314 When Driving i-ACTIVSENSE Top view/Rear view Displays the image of the area around the vehicle and the rear of the vehicle. 1. Top view screen 2. Rear view screen 3. “Check surroundings for safety.” message is displayed 4-163...
Page 315 When Driving i-ACTIVSENSE Top view/Rear wide view Displays the image of the area around the vehicle and the rear of the vehicle (wide-area). 1. Top view screen 2. Rear wide view screen 3. “Check surroundings for safety.” message is displayed 4-164...
Page 316 When Driving i-ACTIVSENSE ▼ How to Use the System Top view/Front view, Top view/Front wide view, Side view Indication Images are displayed on the screen when the 360°View Monitor switch is pressed with all of the following conditions met. The ignition is switched ON. ...
Page 317 15 km/h (9.3 mph) after 8 seconds have passed since pressing the 360°View Monitor switch. The 360°View Monitor settings can be changed as follows.  Refer to the Settings section in the Mazda Connect Owner's Manual. Automatic display of the 360°View Monitor when the ultrasonic sensor detects  an obstruction.
Page 318  reverse to a forward gear without operating the 360°View Monitor switch to check the front of the vehicle while parallel parking. Refer to the Settings section in the Mazda Connect Owner's Manual. Screen operation/icon WARNING Always stop the vehicle when adjusting the 360°View Monitor image quality.
Page 319 When Driving i-ACTIVSENSE ▼ Top View/Front View Use the top view/front view to assist in checking the safety of the surrounding area when accelerating from a stop, parking, or stopping the vehicle. Display range 1. Target object NOTE In the top view screen, the areas in black at the front and rear of the vehicle image ...
Page 320 When Driving i-ACTIVSENSE Viewing the screen Display/Icon Content Tire icon Indicates the tire direction. Moves in conjunction with the steering wheel operation. Projected vehicle path lines (yellow Indicates the approximate projected path of the vehicle. & red) Moves in conjunction with the steering wheel operation. a) Indicates the path where the edge of the front bumper is expected to travel.
Page 321 NOTE The setting can be changed so that the projected vehicle path lines are not displayed. Refer to the Settings section in the Mazda Connect Owner's Manual. How to use the projected vehicle path line function 1. (Screen display) 2. (Actual condition) Make sure that there are no obstructions within the projected vehicle path lines.
Page 322 When Driving i-ACTIVSENSE ▼ Top View/Front Wide View Use the top view/front wide view to assist in checking the safety of the surrounding area when accelerating from a stop or entering a T-shaped intersection and intersection. Display range 1. Target object NOTE In the top view screen, the areas in black at the front and rear of the vehicle image ...
Page 323 When Driving i-ACTIVSENSE Viewing the screen Display/Icon Content Extended vehicle width lines and Indicates the approximate width of the vehicle and the distance guide lines (blue & red) distance (from front end of bumper) in front of the vehi- cle. The red lines indicate the points up to about 0.5 m (19 ...
Page 324 When Driving i-ACTIVSENSE ▼ Side View Use the side view to assist in checking the safety of the surrounding area when accelerating from a stop, parking, or stopping the vehicle. Display range 1. Target object 4-173...
Page 325 Vehicle front end guide lines (blue) Indicates the point about 0.25 m (9.84 in) from the front edge of the vehicle (front edge of the bumper). NOTE The setting can be changed so that the projected vehicle path lines are not displayed. Refer to the Settings section in the Mazda Connect Owner's Manual. 4-174...
Page 326 When Driving i-ACTIVSENSE How to use the projected vehicle path line function 1. (Screen display) 2. (Actual condition) Make sure that there are no obstructions within the projected vehicle path lines. Turn the steering wheel so that the projected vehicle path lines travel inside of the obstruction (A), and drive the vehicle forward until it passes the obstruction.
Page 327 When Driving i-ACTIVSENSE NOTE Because there might be a difference between the image displayed on the screen  and the actual conditions, always check the safety of the surrounding area using the mirrors and directly with your eyes when driving. Even though the object displayed on the screen, such as a road curb or a division ...
Page 328 2.0 m (78 in) from the rear end of the bumper. NOTE The setting can be changed so that the projected vehicle path lines are not displayed. Refer to the Settings section in the Mazda Connect Owner's Manual. 4-177...
Page 329 When Driving i-ACTIVSENSE How to use the projected vehicle path line function CAUTION The front of the vehicle swings out wide when turning the steering wheel while reversing. Maintain sufficient distance between the vehicle and an obstruction. The parking sensor detection range has limitations. For example, obstructions closing in from the side and objects short in height may not be detected.
Page 330 When Driving i-ACTIVSENSE 1. Back the vehicle into the parking space by turning the steering wheel so that the vehicle enters the center of the parking space. 1. (Screen display) 2. (Actual condition) 2. After the vehicle starts entering the parking space, stop and adjust the steering wheel so that the distance between the vehicle width lines and the sides of the parking space on the left and right are roughly equal, and then continue backing up slowly.
Page 331 When Driving i-ACTIVSENSE vehicle in the best possible position. (If the parking space has division lines, check whether the vehicle width guide lines are parallel to them.) 1. (Screen display) 2. (Actual condition) 4-180...
Page 332 When Driving i-ACTIVSENSE ▼ Top View/Rear Wide View Use the top view/rear wide view to assist in checking the safety of the surrounding area when accelerating from a stop, parking, or stopping the vehicle. Range of displayed screen image 1. Target object NOTE In the top view screen, the areas in black at the front and rear of the vehicle image ...
Page 333 When Driving i-ACTIVSENSE Viewing the screen Display/Icon Content Extended vehicle width lines and These guide lines indicate the approximate width of the distance guide lines (blue & red) vehicle and distance to a point measured from the rear of the vehicle (from the end of the bumper). The red lines indicate the points up to about 0.5 m ...
Page 334 When Driving i-ACTIVSENSE 1. Obstruction 2. Margin of error Side camera 1. Obstruction 2. Margin of error Rear camera 1. Obstruction 2. Margin of error There is a steep up or down grade in the road at the front or rear of the vehicle If there is a steep up or down grade in the road at the front or rear of the vehicle, obstructions picked up by the camera can appear farther or closer than the actual distance from the vehicle.
Page 335 When Driving i-ACTIVSENSE Front camera 1. Appears further than actual distance 2. Distance of obstruction being viewed on screen 3. Actual distance of obstruction from vehicle 4. Actual obstruction 5. Obstruction appearing on screen 6. Appears closer than actual distance 4-184...
Page 336 When Driving i-ACTIVSENSE Side camera 1. Appears further than actual distance 2. Distance of obstruction being viewed on screen 3. Actual distance of obstruction from vehicle 4. Actual obstruction 5. Obstruction appearing on screen 6. Appears closer than actual distance 4-185...
Page 337 When Driving i-ACTIVSENSE Rear camera 1. Appears further than actual distance 2. Distance of obstruction being viewed on screen 3. Actual distance of obstruction from vehicle 4. Obstruction appearing on screen 5. Actual obstruction 6. Appears closer than actual distance NOTE If the vehicle is on a slope, obstructions taken by the camera can appear farther or closer than the actual distance from the vehicle.
Page 338 When Driving i-ACTIVSENSE Side camera 1. (Screen display) 2. (Actual condition) Rear camera 1. (Screen display) 2. (Actual condition) 3. Sensed distance on screen A>B>C 4. Actual distance B>C=A 4-187...
Page 339 ▼ System Problem Indication Center display indication Cause Action to be taken “No camera signal.” is displayed The control unit might be damaged. Have your vehicle inspected by an Authorized Mazda Screen is pitch-black and blank The camera might be damaged. Dealer. 4-188...
Page 340: Forward Sensing Camera (Fsc)
If the area in front of the Forward Driver Attention Alert (DAA)  Sensing Camera (FSC) lens is Mazda Radar Cruise Control with  obstructed, it will cause the system Stop & Go function (MRCC with to not operate correctly.
Page 341 Distance & Speed Alert (DSA) removing dirt or fogging. Use the Driver Attention Alert (DAA) windshield defroster to remove Mazda Radar Cruise Control fogging on the windshield. Consult an Authorized Mazda with Stop & Go function (MRCC Dealer regarding cleaning the with Stop &...
Page 342 When Driving i-ACTIVSENSE The height of the vehicle ahead is Elongated luggage or cargo is   low. loaded onto installed roof rails and You drive your vehicle at the same covers the Forward Sensing  speed as the vehicle ahead. Camera (FSC).
Page 343 Forward have the windshield replaced. Sensing Camera (FSC) are Consult an Authorized Mazda Dealer temporarily stopped and the for replacement. following warning lights turn on. The Forward Sensing Camera (FSC) ...
Page 344: Front Radar Sensor
Distance & Speed Alert (DSA) the position of the front radar sensor  may have moved. Stop the system Mazda Radar Cruise Control with  immediately and always have the Stop & Go function (MRCC with Stop & Go function)
Page 345 When Driving i-ACTIVSENSE When driving on roads with little Your vehicle is tilted (such as when   traffic and few vehicles ahead or heavy luggage is in the luggage obstructions for the front radar compartment or on the rear seat). sensor to detect, “Safety and Driver The vehicle is driven near facilities or ...
Page 346: Rear Side Radar Sensor
Stop the system ▼ Rear Side Radar Sensor immediately and have the vehicle Your vehicle is equipped with rear side inspected at an Authorized Mazda radar sensor. Dealer. Vehicles are shipped with the direction of the rear side radar...
Page 347: Rear/Rear Corner Ultrasonic Sensor
When Driving i-ACTIVSENSE Bicycles Rear/Rear Corner  Pedestrians  Ultrasonic Sensor Animals  Shopping carts  ▼ Rear/Rear Corner Ultrasonic Stationary objects on the road or  Sensor roadside Vehicles with shapes that may not  The ultrasonic sensors function by reﬂect radar waves (such as emitting ultrasonic waves which are unloaded trailers with low vehicle...
Page 348: Front Camera/Side Cameras/Rear Camera
When Driving i-ACTIVSENSE Front Camera/Side Cameras/Rear Camera ▼ Front Camera/Side Cameras/Rear Camera Your vehicle is equipped with a front camera, side cameras, and a rear camera. The 360°View Monitor uses each camera. Refer to 360°View Monitor on page 4-156. The front camera, side cameras, and rear camera shoot images of the area surrounding the vehicle.
Page 349: Cruise Control
Stop & Go function (MRCC with Stop & Go function) on page 4-117. Hilly terrain If the Mazda Radar Cruise Control with Steep inclines Stop & Go function (MRCC with Stop Heavy or unsteady traffic &...
Page 350 If the headway control function is Any of the doors is opened.  disabled using a Mazda Connect The driver's seat belt is unfastened.  setting, the system switches to cruise The brake pedal is depressed.
Page 351 When Driving Cruise Control Instrument cluster (Basic display) Press and hold: 10 km/h (5 mph)  NOTE Even after releasing the RES switch, the cruise control accelerates/decelerates continuously until the set speed displayed in the instrument cluster and on the active driving display is reached. If you want to stop accelerating/ decelerating, change the set speed or cancel the system (such as by...
Page 352 When Driving Cruise Control ▼ To Temporarily Cancel ▼ To Deactivate To temporarily cancel the system, use Press the cruise switch again. one of these methods: Slightly depress the brake pedal.  Press the CANCEL switch.  If the RES switch is pressed when the vehicle speed is 30 km/h (19 mph) or higher, the system reverts to the previously set speed.
Page 353: Tire Pressure Monitoring System (Tpms)
Refer to the Vehicle Status Monitor section in the Mazda Connect check your tires as soon as possible, Owner's Manual. and inﬂate them to the proper pressure. Driving on a signiﬁcantly NOTE under-inﬂated tire causes the tire to...
Page 354 If the TPMS warning light ﬂashes, there pressure, even if under-inﬂation has may be a problem with the system. not reached the level to trigger Consult an Authorized Mazda Dealer illumination of the TPMS low tire to have the system inspected. pressure telltale.
Page 355 TPMS. Have an Authorized Mazda Dealer do When replacing a tire or wheel, always the registration or register the ID signal install the tire pressure sensor. The...
Page 356 When installing a new tire pressure sensor, the ID signal code for the tire pressure sensor needs to be registered. For details on purchasing a tire pressure sensor and registering the ID signal of the tire pressure sensor, consult an Authorized Mazda Dealer. 4-205...
Page 357: Rear View Monitor
(location, installation angle) usual, which could cause difficulty in may have deviated. Always consult conﬁrming the surrounding an Authorized Mazda Dealer to have conditions of the vehicle. Always the vehicle inspected. drive carefully conﬁrming the safety of the rear and the surrounding conditions by looking directly with your eyes.
Page 358 Rear View Monitor If “No camera signal.” is indicated in  the display, there could be a problem with the camera. Have your vehicle inspected at an Authorized Mazda Dealer. ▼ Rear View Parking Camera Location 1. Rear view parking camera 4-207...
Page 359 When Driving Rear View Monitor ▼ Switching to the Rear View Monitor Display Shift the selector lever to reverse (R) position with the ignition switched ON to switch the display to the rear view monitor display. NOTE When the selector lever is shifted from reverse (R) position to another selector lever position, the screen returns to the previous display.
Page 360 When Driving Rear View Monitor Images displayed on the monitor from the rear view parking camera are reversed  images (mirror images). Some optionally installed vehicle accessories may be picked up by the camera. Do  not install any optional parts that can interfere with the camera view, such as illuminating parts or parts made of reﬂective material.
Page 361 When Driving Rear View Monitor CAUTION The guide lines on the screen are ﬁxed lines. They are not synced to the driver's turning of the steering wheel. Always be careful and check the area to the vehicle's rear and the surrounding area directly with your eyes while backing up. ▼...
Page 362 When Driving Rear View Monitor 3. After your vehicle begins entering the parking space, continue backing up slowly so that the distance between the vehicle width lines and the sides of the parking space on the left and right are roughly equal. 1.
Page 363 When Driving Rear View Monitor the vehicle in the best possible position. (If the parking space has division lines, check whether the vehicle width guide lines are parallel to them.) 1. (Display condition) 2. (Vehicle condition) 6. When the selector lever is shifted from reverse (R) position to another selector lever position, the screen returns to the previous display.
Page 364 When Driving Rear View Monitor When parking in a space with a division line on only one side of the parking space,  the division line and the vehicle width guide line appear aligned in the monitor, but they may not actually be aligned on the ground. ▼...
Page 365 When Driving Rear View Monitor 4. Actual distance between the vehicle and object. 5. Object at actual position 6. Object on screen Three-dimensional object on vehicle rear Because the distance guide lines are displayed based on a ﬂat surface, the distance to the three-dimensional object displayed on the screen is different from the actual distance.
Page 366: Parking Sensor System
When Driving Parking Sensor System Parking Sensor System ▼ Parking Sensor System The parking sensors use ultrasonic sensors which detect obstructions around the vehicle when the vehicle is driven at low speeds, such as during garage or parallel parking, and a buzzer sound and detection indicator notify the driver of the approximate distance from the vehicle to the surrounding obstruction.
Page 367 Remove any foreign matter from the sensor area. When installing a trailer hitch, consult an Authorized Mazda Dealer.  If a Mazda genuine trailer hitch is used, the rear side of the parking sensor system  is automatically turned off. 4-216...
Page 368 When Driving Parking Sensor System Sensor installation positions Front Rear Sensor Detection Range The sensors detect obstructions within the following range. A:About 55.0 cm (About 21.6 in) B:About 150 cm (About 59.0 in) C:About 100 cm (About 39.3 in) Parking Sensor OFF Switch When the switch is pressed, the parking sensor is stopped and the indicator light turns on.
Page 369 When Driving Parking Sensor System If the switch is pressed again, the parking sensor becomes operational and the indicator light turns off. 1. Indicator light Sound and viewing distance display Informs the driver of the approximate distance from the vehicle to the obstruction using warning beeps depending on the distance.
Page 370 When Driving Parking Sensor System Distance between vehicle and ob- Display struction Beeper sound With out 360° With 360° view Front Rear view monitor monitor Yellow Approx. Approx. 60.0―45.0 cm 60.0―45.0 cm (23.6―17.7 in) (23.6―17.7 in) Medium intermit- tent sound Amber Approx.
Page 371 When Driving Parking Sensor System Corner Display Distance between vehi- Beeper sound With out 360° view cle and obstruction With 360° view monitor monitor Yellow Approx. 55.0―38.0 cm (21.6―14.9 in) Medium intermittent sound Amber Approx. 38.0―25 cm (14.9―9.8 in) Fast intermittent sound Within approx.
Page 372 The detection indicator can be switched between display and non-display and the  buzzer volume can be changed. Refer to the Settings section in the Mazda Connect Owner's Manual. (Vehicles with 360° View Monitor)  When the detection indicator is set to “Display”, even with the 360° view monitor not displayed, if a front sensor or a front corner sensor detects an obstruction, the 360°...
Page 373 MEMO 4-222...
Page 374 USB Power Outlet ....5-43 Wireless Charger (Qi) ..5-43 Cup Holder......5-47 Mazda Connect...... 5-15 Bottle Holder.......5-48 What is Mazda Connect ?..5-15 Assist Grips......5-48 Mazda Connect Basic Rear Coat Hooks....5-49 Operations......5-19 Storage Compartments..5-49 Connected Service (If applicable)......5-36...
Page 375: Interior Features
Climate Control System required for the air conditioner Operating Tips maintenance. For details, consult an Authorized ▼ Operating Tips Mazda Dealer. Operate the climate control system  with the engine running. To prevent the battery from being  discharged, do not leave the fan...
Page 376: Vent Operation
Interior Features Climate Control System NOTE Vent Operation The ﬁgure indicates the air vent on the left side of the instrument cluster. The ▼ Adjusting the Vents operation direction for the air vent on the right side of the instrument cluster Directing airﬂow is symmetrical with the air vent on the To adjust the direction of airﬂow, move...
Page 377 Interior Features Climate Control System 3. Close Rear Vents Air vent open/close Airﬂow direction adjustment 1. Knob 1. Dial 2. Open Center Vents 3. Close Air vent open/close Airﬂow direction adjustment 1. Knob 2. Open 1. Knob 3. Close ▼ Selecting the Airﬂow Mode Airﬂow direction adjustment Dashboard Vents 1.
Page 378 Interior Features Climate Control System 1. With rear vents 1. With rear vents Dashboard and Floor Vents Defroster Vents 1. With rear vents NOTE The location airﬂow exits the air vents Floor Vents and the airﬂow amount may change depending on the open or close status of the air vents.
Page 379: Manual Type
Interior Features Climate Control System Manual Type ▼ Manual Type 1. A/C switch 2. Mode selector switch 3. Air intake selector switch 4. Fan control dial 5. Rear window defogger switch 6. Windshield defroster switch 7. Temperature control dial ▼ Control Switches Fan control dial This dial allows variable fan speeds.
Page 380 Interior Features Climate Control System Air intake selector switch To exit the default recirculated air  position, press the air intake selector This switch controls the source of air switch to select the outside air entering the vehicle. position. When the air intake selector switch is ...
Page 381 Interior Features Climate Control System ▼ Ventilation The air to the ﬂoor is warmer than air  to the face (except when the 1. Press the switch. temperature control dial is set at the 2. Set the air intake selector to the extreme hot or cold position).
Page 382 Interior Features Climate Control System Turning off the air conditioner  For maximum defrosting, turn on the  air conditioner, set the temperature control dial to the extreme hot position, and turn the fan control dial fully clockwise. If warm air is desired at the ﬂoor, ...
Page 383: Fully Automatic Type
Interior Features Climate Control System Fully Automatic Type ▼ Fully Automatic Type Climate control system information is displayed on the display. 1. Driver temperature control dial 2. AUTO switch 3. Temperature setting display (driver’s side) 4. Air intake display 5. Airﬂow display 6.
Page 384 Interior Features Climate Control System When the AUTO switch indicator NOTE  light is on, it indicates auto The climate control system changes  operation, and the system will to the individual operation mode function automatically. (SYNC switch indicator light turns If any of the following switches are ...
Page 385 Interior Features Climate Control System the air conditioner (cooling/ NOTE dehumidifying functions). The recirculated air position is the  The on/off of the air conditioner default position whenever the switches each time the A/C switch is ignition is switched ON, the climate pressed.
Page 386 Interior Features Climate Control System ▼ Windshield Defrosting and Rear window defogger switch Defogging Press the rear window defogger switch to defrost the rear window. Press the windshield defroster switch. Refer to Rear Window Defogger on In this position, the outside air position page 4-58.
Page 387 Interior Features Climate Control System ▼ Sunlight/Temperature Sensor The climate control system measures inside and outside temperatures, humidity and sunlight using the sunlight/temperature sensor. It sets temperatures inside the cabin accordingly. CAUTION Do not obstruct both sensors, otherwise the climate control system will not operate properly.
Page 388: What Is Mazda Connect
What is Mazda Connect ? ▼ What is Mazda Connect ? This manual only indicates a part of the information for Mazda Connect. For details, check the Web owner's manual at the Mazda site for each country and region. 1. Radio ®...
Page 389 Entertainment Bluetooth USB1 Audio/USB2 Audio USB1 Video/USB2 Video Audio Off Displays text messages received by the mobile device paired to Mazda Notiﬁcations Connect and notiﬁcations from the vehicle. By connecting your mobile device, such as a Smartphone, to Mazda ®...
Page 390 Interior Features Mazda Connect Menu Explanation You can change the settings for the Mazda Connect screen, sound set- tings, and the vehicle functions. In-Vehicle Displays: Conﬁgures settings and content for all in-vehicle displays. Sound Settings: Conﬁgures the in-vehicle listening experience.
Page 391 NOTE Do not use Mazda Connect for a long time with the engine stopped. Otherwise,  the battery power could be depleted. If a mobile phone or CB radio is used in or near the vehicle, it could cause noise to ...
Page 392: Mazda Connect Basic Operations
Interior Features Mazda Connect Mazda Connect Basic Operations ▼ Mazda Connect Basic Operations NOTE The explanation of functions described in this manual may differ from the actual operation, and the shapes of screens and buttons and the letters and characters displayed may also differ from the actual appearance.
Page 393 Interior Features Mazda Connect Item Explanation Commander knob (select): Depress the commander knob to select the desired on-screen function you want to use. Entertainment button: The audio source screen last used is displayed. (During Apple CarPlay™ or Android Auto™ music playback) Displays the Apple CarPlay™...
Page 394 Press the volume knob to mute/pause the audio. Press the knob again to resume. Power off/on Press and hold to turn off the Mazda Connect power and turn off the screen. Press and hold again to turn on the Mazda Connect power.
Page 395 Displays the Apple CarPlay™ or Android Auto™ home screen. (While Apple CarPlay™ or Android Auto™ is connected) Press and hold while the Mazda Connect screen is displayed to switch the screen from Mazda Connect to Apple CarPlay™ or Mazda Connect to Android Auto™.
Page 396 Interior Features Mazda Connect ▼ Audio Remote Control Switch Operation The audio remote control switch is on the left side of the steering wheel. You can operate basic audio functions, pick up/hang up the phone, or activate voice control using the switch.
Page 397 Interior Features Mazda Connect Item Explanation SOURCE button: The audio source can be switched each time the button is pressed. In addition, when the button is pressed and held, the current au- SOURCE dio source is muted and the audio source selection screen is displayed.
Page 398 When an Apple CarPlay™ or Android Auto™ compatible device is connected, the ® Mazda Connect voice recognition system is disabled to allow the use of Siri Android Auto™ voice recognition at any time with the talk/pick-up button. Commands usable at any time “Help”...
Page 399 When the Barge-In setting is on, voice commands can be made even while the  voice guidance is being announced. For details on Barge-In, refer to the System Settings section in the Mazda Connect Owner's Manual. For details on voice commands which can be used on the navigation screen, refer ...
Page 400 Interior Features Mazda Connect Cancel  Menu  Navigation  Entertainment  Communication  Setting Voice Recognition Settings  Display Off  Music Play Artist (You can also use “Play Artist {Artist name}”.)  Play Album (You can also use “Play Album {Album Name}”.) ...
Page 401 By using this weather service, you release and waive any claims against Sirius XM Radio Inc. and Mazda Motor Corporation and all of their respective affiliates with regard to this service.
Page 402 “safety for life”, but is merely supplemental and advisory in nature and, therefore, cannot be relied upon as safety critical. Neither SiriusXM nor Mazda is responsible for any errors in accuracies in the SiriusXM data services or its use in applications.
Page 403 OTHER CONTENT PROVIDED BY APPLE, ITS AFFILIATES, OR THIRD PARTY PROVIDERS; MAZDA DOES NOT GUARANTEE AGAINST LOSS OF APPLICATION DATA, WHICH MAY BE LOST AT ANY TIME; MAZDA DOES NOT GUARANTEE THAT THE APPLICATION OR ANY SERVICES PROVIDED THROUGH THEM WILL BE PROVIDED AT ALL TIMES OR THAT ANY OR ALL SERVICES WILL BE AVAILABLE AT ANY PARTICULAR TIME OR LOCATION.
Page 404 TECHNOLOGY OR GOVERNMENT REGULATION MAY RENDER THE SERVICES AND/OR APPLICATIONS OBSOLETE AND/OR UNUSABLE. TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT SHALL MAZDA OR ITS AFFILIATES BE LIABLE FOR PERSONAL INJURY, OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING, WITHOUT...
Page 405 TECHNOLOGY OR GOVERNMENT REGULATION MAY RENDER THE SERVICES AND/OR APPLICATIONS OBSOLETE AND/OR UNUSABLE. TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT SHALL MAZDA OR ITS AFFILIATES BE LIABLE FOR PERSONAL INJURY, OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING, WITHOUT...
Page 406 Interior Features Mazda Connect Apple CarPlay is trademarks of Apple Inc.  iOS is a trademark or registered trademark of Cisco in the U.S. and other countries  and is used under license. “Made for iPhone” and “Made for iPod” mean that an accessory has been ...
Page 407 Interior Features Mazda Connect Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary and third parties. ® The Bluetooth word mark and logos are registered trademarks owned by ...
Page 408 Interior Features Mazda Connect INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;...
Page 409 Please refer to connected services terms and privacy policy available on the Mazda Canada website for more details. Connected Services owner’s manual:...
Page 410 (U.S.A. and Canada) Privacy Policy Mazda maintains a Privacy Statement which describes how we collect, use, share, store and secure data from your vehicle equipped with connected services. We provide you with connected services by collecting and using your personal information and vehicle location, health and driving data.
Page 411: Sun Visors
Interior Features Interior Equipment If your vehicle is equipped with a Sunvisors vanity mirror light, it will illuminate when you open the cover. ▼ Sunvisors The vanity mirror will only illuminate in the tilt range shown in the ﬁgure. Lower the sunvisor to block sunlight from the front.
Page 412: Interior Lights
Interior Features Interior Equipment Interior Lights Switch Overhead Lights The door interlock can be switch- ▼ Interior Lights ed ON/OFF. When the door interlock is OFF, NOTE the indicator light in the switch Do not leave the lights on for long turns on.
Page 413 Interior Features Interior Equipment NOTE NOTE The rear overhead light also turn on Once the rear map lights have been  and off when the front overhead light turned off, they will turn on and off switch is operated. in conjunction with the overhead light operation.
Page 414: Accessory Socket
OFF. The ignition is switched OFF with all ▼ Accessory Socket  doors closed. Only use genuine Mazda accessories or the equivalent requiring no greater NOTE than 120 W (DC 12 V, 10 A). The illumination time differs ...
Page 415 Do not use accessories that require more than 120 W (DC 12 V, 10 A). Do not use accessories that are not genuine Mazda accessories or the equivalent. Close the cover when the accessory socket is not in use to 1.
Page 416: Usb Power Outlet
Interior Features Interior Equipment USB Power Outlet Wireless Charger (Qi) ▼ USB Power Outlet ▼ Wireless Charger (Qi) The USB power outlets can be used You can charge mobile devices such as regardless of whether the ignition is Smartphones which comply with the switched to ACC or ON.
Page 417 Use only mobile devices which disabled to prevent it from affecting support the Wireless Charger (Qi). medical devices. Consult an Authorized Mazda Dealer for details. CAUTION Heed the following cautions. Otherwise, the Wireless Charger (Qi) While a mobile device is placed on...
Page 418 Charger (Qi) can be checked with the The Wireless Charger (Qi) can be LED indicator or the icon displayed on turned on/off and the connection the center display. mode can be switched. Refer to the Settings section in the Mazda Connect Owner's Manual. 5-45...
Page 419 Interior Features Interior Equipment While i-stop is operating, charge NOTE amount may be temporarily A mobile device larger than the  restricted and charging may be charging area cannot be charged. In temporarily canceled, however, this addition, even if the mobile device is does not indicate a problem.
Page 420: Cup Holder
Interior Features Interior Equipment ▼ Rear Cup Holder The rear cup holder is on the rear ▼ Cup Holder center armrest. WARNING Never use a cup holder to hold hot liquids while the vehicle is moving: Using a cup holder to hold hot liquids while the vehicle is moving is dangerous.
Page 421: Bottle Holder
Interior Features Interior Equipment Bottle Holder Assist Grips ▼ Bottle Holder ▼ Assist Grips Bottle holders are on the inside of the WARNING doors. Never hang heavy or sharp objects on the assist grips and coat hooks: Hanging heavy or sharp-ended objects such as a coat hanger from the assist grips or coat hooks is dangerous as they can ﬂy off and hit an occupant in...
Page 422: Rear Coat Hooks
Interior Features Interior Equipment Rear Coat Hooks Storage Compartments ▼ Rear Coat Hooks ▼ Storage Compartments WARNING WARNING Never hang heavy or sharp objects on Keep storage boxes closed when the assist grips and coat hooks: driving: Hanging heavy or sharp-ended objects Driving with the storage boxes open is such as a coat hanger from the assist dangerous.
Page 423 Interior Features Interior Equipment Push and release to open. apply excessive force to the loops as it will damage them. ▼ Glove Compartment To open the glove compartment, pull NOTE the knob toward you. Loading golf bags (Some golf bags may not ﬁt using the following methods depending on their sizes.) Up to three golf bags can be carried in...
Page 424 Interior Features Interior Equipment 3. Place the third golf bag in the luggage compartment with the bottom pointed to the left rear. The arrows indicate the bottoms of the golf bags. 5-51...
Page 425 MEMO 5-52...
Page 426 Maintenance and Care How to keep your Mazda in top condition. Essential Information....6-2 Brake Fluid......6-20 Introduction......6-2 Washer Fluid....... 6-21 Body Lubrication....6-22 Wiper Blades....... 6-22 Scheduled Maintenance.... 6-4 Battery........ 6-27 Scheduled Maintenance..6-4 Key Battery Replacement..6-29 Tires........6-31 Owner Maintenance....6-11 Light Bulbs......6-34...
Page 427: Maintenance And Care
 that you completed the maintenance Factory-trained Mazda technicians and yourself, displaying mileage and the genuine Mazda parts are best for your date the work was performed. Also, vehicle. Without this expertise and the receipts for the replacement parts parts that have been designed and (ﬂuid, ﬁlters, etc.) indicating the date...
Page 428 Any auto repair shop using parts equivalent to your Mazda's original equipment may perform maintenance. But we recommend that it always be done by an Authorized Mazda Dealer using genuine Mazda parts. Selecting “Vehicle Status Monitor” enables the system to notify you of your vehicle's approaching inspection/ servicing period.
Page 429: Scheduled Maintenance
If you are following the Severe Driving Scheduled Maintenance (8,000 km (5,000 miles) or 6 months oil replacement interval), set the vehicle status monitor manually. Refer to the Information section in the Mazda Connect Owner's Manual. Please contact an Authorized Mazda Dealer if necessary.
Page 430 According to state/provincial and federal regulations, failure to perform maintenance on these items will not void your emissions warranties. However, Mazda recommends that all maintenance services be performed at the recommended time or mileage/kilometer period to ensure long-term reliability.
Page 431 If you are following 8,000 km (5,000 miles) or 6 months maintenance interval, set the vehicle status monitor manually. Refer to the owner's manual section of mazda.ca for the Mazda Connect owner's manual or contact an Authorized Mazda Dealer if necessary.
Page 432 Maintenance and Care Scheduled Maintenance Number of months or kilometers (miles), whichever comes ﬁrst. Months 12 18 24 30 36 42 48 54 60 66 72 Maintenance Interval ×1000 km 16 24 32 40 48 56 64 72 80 88 96 ×1000 miles 10 15 20 25 30 35 40 45 50 55 60 SKYACTIV-G...
Page 433 According to state/provincial and federal regulations, failure to perform maintenance on these items will not void your emissions warranties. However, Mazda recommends that all maintenance services be performed at the recommended time or mileage/kilometer period to ensure long-term reliability.
Page 434 If you are following the Severe Driving Scheduled Maintenance (5,000 km or 3 months oil replacement interval), set the vehicle status monitor manually. Refer to the Information section in the Mazda Connect Owner's Manual. Please contact an Authorized Mazda Dealer if necessary.
Page 435 According to state/provincial and federal regulations, failure to perform maintenance on these items will not void your emissions warranties. However, Mazda recommends that all maintenance services be performed at the recommended time or mileage/kilometer period to ensure long-term reliability.
Page 436: Owner Maintenance Precautions
If you are unsure about any servicing or Bring any problem to the attention of maintenance procedure, have it done an Authorized Mazda Dealer or by an Authorized Mazda Dealer. qualiﬁed service technician as soon as possible.
Page 437 Maintenance and Care Owner Maintenance If you must run the engine while Hood working under the hood, make certain that you remove all jewelry ▼ Hood (especially rings, bracelets, watches, and necklaces) and all neckties, WARNING scarves, and similar loose clothing before getting near the engine or Always check that the hood is closed cooling fan which may turn on...
Page 438 Maintenance and Care Owner Maintenance the illustration, and lift up the hood. ▼ Closing the Hood 1. Check under the hood area to make certain all ﬁller caps are in place and all loose items (e.g. tools, oil containers, etc.) have been removed.
Page 439: Engine Compartment Overview
Maintenance and Care Owner Maintenance Engine Compartment Overview ▼ Engine Compartment Overview SKYACTIV-G 2.5 1. Engine oil dipstick 2. Brake ﬂuid reservoir 3. Battery 4. Fuse block 5. Cooling system cap 6. Engine oil-ﬁller cap 7. Engine coolant reservoir 8. Windshield washer ﬂuid reservoir 6-14...
Page 440 Maintenance and Care Owner Maintenance SKYACTIV-G 2.5T 1. Engine oil dipstick 2. Brake ﬂuid reservoir 3. Battery 4. Fuse block 5. Cooling system cap 6. Engine oil-ﬁller cap 7. Engine coolant reservoir 8. Windshield washer ﬂuid reservoir 6-15...
Page 441: Engine Oil
SKYACTIV-G 2.5T U.S.A., Canada Use SAE 5W-30 engine oil. SKYACTIV-G 2.5 Mazda Genuine Oil is used in your Use SAE 0W-20 engine oil. Mazda vehicle. Mazda Genuine Mazda Genuine Oil is used in your 5W-30 Oil is required to achieve Mazda vehicle.
Page 442 If SAE 5W-30 engine oil is amount of fuel necessary to overcome not available, use SAE 0W-30 or SAE engine friction. 10W-30 engine oil. For maintenance service, Mazda The quality designation SM, SN or SP recommends Mazda Genuine Parts. must be on the label. (Mexico) SKYACTIV-G 2.5...
Page 443 Maintenance and Care Owner Maintenance ▼ Inspecting Engine Oil Level CAUTION Do not overﬁll the engine oil. This NOTE may cause engine damage. If the engine oil level warning  6. Make sure the O-ring on the indication/warning light turns on, dipstick is positioned properly add 1 L (0.26 US gal, 0.22 Imp gal) before reinserting the dipstick.
Page 444: Engine Coolant
When the engine and radiator are hot, scalding coolant and steam may shoot out under pressure and cause serious injury. NOTE Changing the coolant should be done by an Authorized Mazda Dealer. 6-19...
Page 445: Brake Fluid
If the coolant reservoir is empty or new associated with wear of brake linings. If coolant is required frequently, consult it is excessively low, have the brake an Authorized Mazda Dealer. system inspected by an Authorized Mazda Dealer. 6-20...
Page 446: Washer Fluid
Maintenance and Care Owner Maintenance Inspect ﬂuid level in the washer ﬂuid Washer Fluid reservoir; add ﬂuid if necessary. ▼ Inspecting Washer Fluid Level WARNING Use only windshield washer ﬂuid or plain water in the reservoir: Using radiator antifreeze as washer ﬂuid is dangerous.
Page 447: Body Lubrication
Maintenance and Care Owner Maintenance Body Lubrication Wiper Blades ▼ Body Lubrication ▼ Wiper Blades All moving points of the body, such as CAUTION door and hood hinges and locks, should be lubricated each time the Hot waxes applied by automatic car engine oil is changed.
Page 448 2. Raise the wiper arms. blades. If they are replaced with 3. Slide the blade component in the wiper blades other than a Mazda direction of the arrow while genuine product, they may not wipe pressing the wiper arm tab to with the same efficiency as the genuine product.
Page 449 Maintenance and Care Owner Maintenance remove the blade component from the blade rubber from the blade the wiper arm. holder. 4. Pull the blade rubber in the direction of the arrow and slide it to a position where the blade holder groove can be checked.
Page 450 Maintenance and Care Owner Maintenance 7. After pulling the blade rubber in the CAUTION direction of the arrow and sliding the blade rubber to a position to To prevent damage to the check the blade holder groove, windshield let the wiper arm down slide the blade rubber end in the easily, do not let it slap down on opposite direction.
Page 451 Maintenance and Care Owner Maintenance 2. Remove the stopper and raise the 4. Pull down the blade rubber and wiper arm. slide it out of the blade holder. 5. Remove the metal stiffeners from 3. Firmly rotate the wiper blade to the the blade rubber and install them in right until it unlocks, then remove the new blade.
Page 452 Maintenance and Care Owner Maintenance Battery ﬂuid contains SULFURIC ACID Battery which could cause serious injuries if it gets in eyes, or on the skin or clothing. ▼ Battery If this happens, immediately ﬂush your eyes with water for 15 minutes or wash WARNING your skin thoroughly and get medical attention.
Page 453 If the vehicle will not be used for an  extended time, disconnect the battery cables and charge the battery every 6 weeks. ▼ Battery Replacement Contact an Authorized Mazda Dealer for battery replacement. 6-28...
Page 454: Key Battery Replacement
ﬂash, the battery may be Replacing the battery at an Authorized dead. Mazda Dealer is recommended. If Replace with a new battery before the replacing the battery by yourself, transmitter becomes unusable.
Page 455 Maintenance and Care Owner Maintenance 3. Insert a tape-wrapped ﬂathead 8. Install the cap. screwdriver into the gap and slide it in the direction of the arrow. 9. Install the upper cover. 4. Twist the ﬂathead screwdriver in the direction of the arrow and remove the upper cover.
Page 456 Maintenance and Care Owner Maintenance Use only a Mazda-genuine tire valve Tires cap: Use of a non-genuine part is ▼ Tires dangerous as the correct tire air For reasons of proper performance, pressure cannot be maintained if the safety, and better fuel economy, always tire valve becomes damaged.
Page 457 Replacing just one tire is dangerous. It could cause poor handling and poor braking resulting in loss of vehicle control. Mazda strongly recommends that you replace all four tires at the 1. Forward same time. Do not include (TEMPORARY USE ONLY) spare tire in rotation.
Page 458 Maintenance and Care Owner Maintenance 3. Tread wear indicator CAUTION Do not use your temporary spare tire You should replace the tire before the band crosses the entire tread. rim with a snow tire or a conventional tire. Neither will NOTE properly ﬁt and could damage both Tires degrade over time, even when...
Page 459: Light Bulbs
(inset/outset). For details, contact an Authorized  1. High-mount brake light Mazda Dealer. 2. Rear side-marker lights 3. Brake lights/Taillights Proper tire balancing provides the best 4. Rear turn signal lights riding comfort and helps reduce tread 5.
Page 460 If the same fuse blows again, avoid Authorized Mazda Dealer. using that system and consult an 1. Make sure the vehicle has a full Authorized Mazda Dealer as soon as tank of gasoline and the area possible. around the headlight is not ▼...
Page 461 2. Blown CAUTION Always replace a fuse with a genuine Mazda fuse or equivalent of the same rating. Otherwise, you may damage the electric system. 6. Reinstall the cover and make sure that it is securely installed.
Page 462 Maintenance and Care Owner Maintenance WARNING Do not replace the main fuse by yourself. Have an Authorized Mazda Dealer perform the replacement: Replacing the fuse by yourself is dangerous because the MAIN fuse is a high current fuse. Incorrect replacement could cause an electrical shock or a short circuit resulting in a ﬁre.
Page 463 Maintenance and Care Owner Maintenance ▼ Fuse Panel Description Fuse block (Engine compartment) FUSE RAT- PROTECTED COMPONENT ― ― 20 A Windshield wiper de-icer 30 A Engine control system 20 A S-VT 40 A Engine control system ― ― 20 A Fuel pump 6-38 *Some models.
Page 464 Maintenance and Care Owner Maintenance FUSE RAT- PROTECTED COMPONENT 15 A Engine control system 15 A Transmission control system 10 A Engine control system 7.5 A Air conditioner 15 A Engine control system ― ― 15 A Electric water pump ―...
Page 465 Maintenance and Care Owner Maintenance FUSE RAT- PROTECTED COMPONENT 30 A Audio 20 A Windshield wipers 30 A Cooling fan 30 A Starter 10 A Engine control system 15 A Audio 15 A For protection of various circuits 7.5 A Air bag 15 A Instrument cluster...
Page 466 Maintenance and Care Owner Maintenance Fuse block (Left side) FUSE RAT- PROTECTED COMPONENT ― ― ― ― 20 A Front seat warmer 15 A Power door locks (Driver) 15 A Power door locks (Passenger) 20 A Rear seat warmer 25 A Power liftgate 30 A Power seat (Passenger)
Page 467 Maintenance and Care Owner Maintenance FUSE RAT- PROTECTED COMPONENT 15 A Illumination 10 A Brake lights 10 A Reverse lights 10 A Rear turn signal lights 10 A Taillights 10 A Taillights 7.5 A Air bag ― ― 6-42 *Some models.
Page 468: Exterior Care
Here are some examples of possible with it. damage, with tips on how to prevent Prevention them. It is necessary to have your Mazda Etching Caused by Acid Rain or washed and waxed to preserve its Industrial Fallout ﬁnish according to the instructions in Occurrence this section.
Page 469 Otherwise, the windshield wipers Chipped paint can lead to rust  will operate automatically which forming on your Mazda. Before this could catch your ﬁngers or damage happens, repair the damage by using the windshield wipers. Mazda touch-up paint according to When removing ice or snow, or the instructions in this section.
Page 470 NOTE Mazda is not responsible for Thoroughly rinse off all soap with  scratches caused by automatic car lukewarm or cold water. Do not allow washes or improper washing.
Page 471 CAUTION available depending on the type of car wash machine. If the car washer nozzle If your Mazda is damaged and needs is put too close to the vehicle, the metal parts repaired or replaced, make force of the spray could damage or...
Page 472 Maintenance and Care Appearance Care ▼ Bright-Metal Maintenance ▼ Underbody Maintenance Use tar remover to remove road tar Road chemicals and salt used for ice  and insects. Never do this with a and snow removal and solvents used knife or similar tool. for dust control may collect on the To prevent corrosion on bright-metal underbody.
Page 473 Maintenance and Care Appearance Care ▼ Aluminum Wheel Maintenance ▼ Plastic Part Maintenance A protective coating is provided over When cleaning the plastic lenses of  the aluminum wheels. Special care is the lights, do not use gasoline, needed to protect this coating. kerosene, rectiﬁed spirit, paint, thinner, highly acidic detergents, or CAUTION...
Page 474: Interior Care
If a seat belt appears frayed or has alcohol, chlorine bleach, or organic abrasions, have it replaced by an solvents such as thinner, benzene, Authorized Mazda Dealer: and gasoline. Otherwise, it may If a seat belt is used under such a cause discoloration or stains.
Page 475 Maintenance and Care Appearance Care ▼ Vinyl Upholstery Maintenance If the leather upholstery comes into  contact with any of the following, Remove dust and dirt from the vinyl clean it immediately. upholstery using a brush or vacuum. Leaving it uncleaned could cause Remove soiling from vinyl upholstery premature wear, mold, or stains.
Page 476 Maintenance and Care Appearance Care ▼ Instrument Panel Top (Soft pad) ▼ Active Driving Display Maintenance Maintenance Extremely soft material is used for the The dust-proof sheet has a coating. soft pad surface. If the soft pad surface When cleaning, do not use a hard or is rubbed harshly with a dry cloth, it rough-surface cloth, or cleaning could result in the surface being...
Page 477 Maintenance and Care Appearance Care ▼ Cleaning the Window Interiors ▼ Cleaning the Floor Mats If the windows become covered with Rubber ﬂoor mats should be cleaned an oily, greasy, or waxy ﬁlm, clean with mild soap and water only. them with glass cleaner.
Page 478 If Trouble Arises Helpful information on what to do if a problem arises with the vehicle. Parking in an Emergency.... 7-2 Warning/Indicator Lights and Parking in an Emergency..7-2 Warning Sounds..... 7-20 If a Warning Light Turns On or Flashes........ 7-20 Flat Tire........
Page 479: If Trouble Arises
If Trouble Arises Parking in an Emergency Parking in an Emergency ▼ Parking in an Emergency The hazard warning lights should always be used when you stop on or near a roadway in an emergency. The hazard warning lights warn other drivers that your vehicle is a traffic hazard and that they must take extreme caution when near it.
Page 480 5. Jack 6. Spare tire ▼ Spare Tire ▼ Jack Your Mazda has a temporary spare tire. The temporary spare tire is lighter and To remove the jack smaller than a conventional tire, and is 1. Remove the luggage mat.
Page 481 3. (Vehicles with sub-woofer) been designed only for your Turn the spare tire hold-down bolt Mazda. counterclockwise and remove the Use only one temporary spare tire sub-woofer and the spare tire. on your vehicle at the same time.
Page 482: Changing A Flat Tire
If Trouble Arises Flat Tire Turn the spare tire hold-down bolt Changing a Flat Tire counterclockwise and remove the spare tire. ▼ Changing a Flat Tire NOTE If the following occurs while driving, it could indicate a ﬂat tire. Steering becomes difficult. ...
Page 483 NOTE If your Mazda is equipped with the optional antitheft wheel lug nuts, a special key must be used to unlock the locking lug nut for each wheel.
Page 484 Use only the jack provided with your Mazda: Using a jack that is not designed for your Mazda is dangerous. The vehicle could slip off the jack and seriously injure someone. Never place objects under the...
Page 485 ▼ Locking Lug Nuts that the spare tire can be installed. Before removing the lug nuts, make If your Mazda is equipped with the sure your Mazda is ﬁrmly in optional antitheft wheel lug nuts, a position and that it cannot slip or special key must be used to unlock the move.
Page 486 If Trouble Arises Flat Tire To remove an antitheft lug nut WARNING 1. Obtain the special key for the antitheft lug nut. Make sure the mounting surfaces 2. Place the special key on top of the of the wheel, hub and lug nuts are antitheft lug nut, and be sure to clean before changing or replacing hold the key square to it.
Page 487 Because the wheel studs and lug nuts on your Mazda have metric threads, using a non-metric nut is dangerous. On a metric stud, it would not secure the wheel and...
Page 488: Jump Starting
If Trouble Arises Battery Runs Out Jump-Starting ▼ Jump-Starting Jump-starting is dangerous if done incorrectly. So follow the procedure carefully. If you feel unsure about jump-starting, we strongly recommend that you have a competent service technician do the work. WARNING Follow These Precautions Carefully: To ensure safe and correct handling of the battery, read the following precautions carefully before using the battery or inspecting it.
Page 489 If Trouble Arises Battery Runs Out Route the jumper cables away from parts that will be moving: Connecting a jumper cable near or to moving parts (cooling fans, belts) is dangerous. The cable could get caught when the engine starts and cause serious injury.
Page 490 6. Start the engine of your vehicle. Run the engines for about 3 minutes to temporarily charge the battery of your vehicle. 7. Disconnect the jumper cables in the reverse order of their connection. 8. Install the battery cover. 9. Have your vehicle inspected by an Authorized Mazda Dealer as soon as possible. 7-13...
Page 491: Starting A Flooded Engine
Starting a Flooded Engine Push-Starting ▼ Starting a Flooded Engine ▼ Push-Starting If the engine fails to start, it may be Do not push-start your Mazda. ﬂooded (excessive fuel in the engine). WARNING Follow this procedure: Never tow a vehicle to start it: 1.
Page 492 Stop the engine and call an Authorized Mazda Dealer. Do not remove either 6. Make sure the cooling fan is cooling system cap when the engine operating, then turn off the engine...
Page 493 CAUTION If the engine continues to overheat or frequently overheats, have the cooling system inspected. The engine could be seriously damaged unless repairs are made. Consult an Authorized Mazda Dealer. 1. Cooling system cap 2. Cooling fan 3. Coolant reservoir SKYACTIV-G 2.5T...
Page 494: Towing Description
We recommend that towing be done away from the tow truck and cause an only by an Authorized Mazda Dealer accident. If the drive train has been or a commercial tow-truck service. damaged, transport the vehicle on a ﬂatbed truck.
Page 495: Tiedown Hooks
If Trouble Arises Emergency Towing If the parking brake cannot be Tiedown Hooks released when towing the vehicle, transport the vehicle with all front ▼ Tiedown Hooks and rear wheels raised off the ground as shown in the ﬁgure. If the vehicle CAUTION is towed without raising the wheels off the ground, the brake system...
Page 496 If Trouble Arises Emergency Towing Rear 2. Tiedown eyelet Rear CAUTION 1. Lug wrench Do not use excessive force as it may 2. Tiedown eyelet damage the cap or scratch the 4. Hook the tying rope to the tiedown painted bumper surface. eyelet.
Page 497: If A Warning Light Turns On Or Flashes
Do not drive with the brake system 1. Press the INFO switch on the warning light illuminated. Contact an steering switch to display the Authorized Mazda Dealer to have the warning indication screen. brakes inspected as soon as possible: Refer to Multi-information Display Driving with the brake system warning on page 4-19.
Page 498 ABS warning oil pressure. light illuminated. Have the vehicle CAUTION towed to an Authorized Mazda Dealer to have the brakes inspected as Do not run the engine if the oil soon as possible: pressure is low. Otherwise, it could Driving when the brake system warning result in extensive engine damage.
Page 499 The message is displayed if the electric towed to an Authorized Mazda Dealer. power steering has a malfunction. If the message is displayed, stop the ▼ High Engine Coolant Temperature...
Page 500 Mazda Dealer. normally as if the vehicle had no ABS. ▼ Electric Parking Brake (EPB) Should this happen, consult an Indication/Indicator Light Authorized Mazda Dealer as soon as possible. NOTE When the engine is jump-started to  charge the battery, uneven rpm...
Page 501 The fuel-ﬁller cap is missing or not  transmission has an electrical problem. tightened securely. Continuing to drive your Mazda in this The fuel tank level being very low or  condition could cause damage to your approaching empty.
Page 502 The indication is displayed/the light turns on under the following conditions. The system may have a malfunction. Have the vehicle checked at an Authorized Mazda Dealer. If the light stays on, the TCS, DSC or When there is a malfunction in the ...
Page 503 ﬂashing is dangerous because vehicle inspected at an Authorized the brake performance and the Mazda Dealer as soon as possible. steering wheel operability will be Refer to Emergency Operation for reduced. If the vehicle is driven at high Starting the Engine on page 4-9.
Page 504 The indication displays if the system not shut off the engine. Go to an has a malfunction. Authorized Mazda Dealer and have it Check the reason for the indication checked. If the engine is shut off while displaying on the center display or the indicator light is ﬂashing, you will...
Page 505 If Trouble Arises Warning/Indicator Lights and Warning Sounds ▼ Low Fuel Warning Indication/ ▼ Engine Oil Level Warning Warning Light Indication/Warning Light The warning indication/warning light This warning light indicates that the displays/turns on when the ignition is engine oil level is around the MIN switched ON and the remaining fuel is mark (page 6-18).
Page 506 If Trouble Arises Warning/Indicator Lights and Warning Sounds light stops ﬂashing, but remains Action to be taken illuminated. Fasten the seat belts. NOTE ▼ Low Washer Fluid Level Warning The warning light ﬂashes for about 6 Indication/Warning Light  seconds if the driver or front passenger's seat is not fastened when the ignition is switched ON.
Page 507 If Trouble Arises Warning/Indicator Lights and Warning Sounds ▼ Tire Pressure Monitoring System Continuing to drive the vehicle while ignoring the illumination/ﬂashing of (TPMS) Warning Indication/ the TPMS warning light is dangerous Warning Light (Turns on) because a tire may burst which could lead to an accident.
Page 508 If Trouble Arises Warning/Indicator Lights and Warning Sounds ▼ KEY Indicator Light (Green) CAUTION (Flashing) Adjust the tire pressures while the tires are cool. Because the air pressure in the tires ﬂuctuates depending on the temperature, before adjusting the tire pressures, let the vehicle sit for an hour or drive “Low Key Fob Battery.
Page 509 Brake Hold Disabled vehicle inspected at an Authorized in a stop position by the AUTOHOLD Mazda Dealer. function. This message indicates the possibility Steep Slope. Continue of the vehicle not being held in the...
Page 510 *1*2*3 Content Action to be taken Display This message is indicated when the Mazda Radar Cruise Control with Mazda Radar Cruise Stop & Go function (MRCC with Stop Have your vehicle inspected by an Control Canceled. Drive & Go function), and the Traffic Jam Authorized Mazda Dealer.
Page 511 This message is indicated when the Mi-Drive Unavailable Mi-Drive switch is operated while Have your vehicle inspected by an Due to System Malfunc- there is a problem with the Mazda in- Authorized Mazda Dealer. tion telligent Drive Select (Mi-Drive) relat- ed system.
Page 512 Authorized Mazda Dealer. This message is indicated when the TOWING Mode Can Mazda genuine trailer hitch is con- Select TOWING mode if necessary. Now Be Selected. nected. A pop-up is displayed when a warning occurs.
Page 513: Warning Sound Is Activated
Refer to the Settings section in the Mexico Mazda Connect Owner's Manual. If the vehicle speed exceeds about 20 NOTE km/h (12 mph) with the driver or front When the ignition is switched to passenger's seat belt unfastened, a ...
Page 514 If Trouble Arises Warning/Indicator Lights and Warning Sounds Vehicles without advanced keyless NOTE function Placing heavy items on the front  passenger's seat may cause the front If the key is taken out of the vehicle passenger's seat belt warning while the ignition is switched to ACC function to operate depending on or ON, and all the doors are closed, a...
Page 515 If Trouble Arises Warning/Indicator Lights and Warning Sounds ▼ Key Left-in-luggage Compartment Warning beep What to check Warning Beep (With the advanced The conditions re- keyless function) quired for the power The beep sounds 3 liftgate to operate have If the key is left in the luggage times not been met, such as compartment with all the doors locked...
Page 516 Authorized approaching from the rear on the left Mazda Dealer. and right sides of the vehicle. ▼ Lane/Road Departure Warning Beep The warning beep is activated when the system determines that the vehicle may depart from the lane or the road.
Page 517 If Trouble Arises Warning/Indicator Lights and Warning Sounds ▼ Mazda Radar Cruise Control with ▼ Collision warning Stop & Go function (MRCC with If there is a possibility of a collision Stop & Go function) System with a vehicle ahead, a warning sound...
Page 518: When Liftgate Cannot Be Opened
After performing this emergency If the liftgate cannot be unlocked even measure, have the vehicle inspected at if the dead battery situation has been an Authorized Mazda Dealer as soon resolved, the electrical system may as possible. have a malfunction.
Page 519: If The Active Driving Display Does Not Operate
If the active driving display does not operate, switch the ignition off and then restart the engine. If the active driving display does not operate even with the engine restarted, have the vehicle inspected at an Authorized Mazda Dealer. 7-42 *Some models.
Page 520 The windshield wipers may operate at high speed if there is a problem with the wiper control. If the windshield wipers operate at high speed regardless of the wiper switch operation, have your vehicle inspected by an Authorized Mazda Dealer. 7-43...
Page 521 MEMO 7-44...
Page 522: Customer Information And Reporting Safety Defects
Location of the Tire Label (Canada)......8-13 (Placard)......8-25 Tire Maintenance....8-27 Warranty........8-14 Vehicle Loading....8-29 Warranties for Your Mazda ..Steps for Determining the Correct .......... 8-14 Load Limit......8-32 Outside the United States/ Canada....... 8-14 Declaration of Conformity..8-33 Registering Your Vehicle in A Declaration of Conformity ...
Page 523: Customer Assistance (U.s.a.)
If it becomes necessary to have the components or wiring system for the Answers to many questions, including supplementary restraint system how to locate or contact a local Mazda modiﬁed to accommodate a person dealership in the U.S., can be found with certain medical conditions in here.
Page 524 5. Your dealer's name and location days or less. The arbitration decision is 6. Your question(s) not binding on you or Mazda unless you accept the decision. For more If you live outside the U.S.A., please information about BBB AUTO LINE,...
Page 525 You will also be asked to 7. California Civil Code Section provide: the approximate date of 1793.2 (d) requires that, if Mazda your acquisition of the vehicle, the or its representative is unable to vehicle's current mileage, the...
Page 526 Mazda or its agents 11.If you accept the arbitrator's AND the buyer has notiﬁed decision, Mazda will be bound by Mazda of the need for the repair the decision, and will comply with of the nonconformity; OR the decision within a reasonable...
Page 527: Customer Assistance (Canada)
Mazda. All Authorized Mazda Dealers 2. Year and model of vehicle have both the knowledge and tools to 3. Vehicle Identiﬁcation Number keep your Mazda in top condition. In (VIN). Refer to the Vehicle our experience, any questions, Identiﬁcation Number on page problems, or complaints regarding the 9-2 for the location of the VIN.
Page 528 M2J 4Y8 binding arbitration. http://camvap.ca Provincial Administrators may be Your complete satisfaction is the goal reached locally: of Mazda Canada Inc. and our dealers. Province/Territory CAMVAP Number Mazda's participation in CAMVAP makes a valuable contribution to our British Columbia & Yu- 1 (800) 207-0685 achieving that goal.
Page 529: Customer Assistance (Puerto Rico)
LAND, ONTARIO, L4B 3K5 NEWFOUNDLAND 1 (800) 263-4680 Discuss the matter with an Authorized Mazda Dealer. This is the quickest and MAZDA CANADA best way to address the issue. If your INC. concern has not been resolved by the QUEBEC REGION...
Page 530: Customer Assistance (Mexico)
Your complete and permanent satisfaction is our business. We are here to serve you. All Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition. If you have any questions or recommendations for improvement...
Page 531 Log on: at www.mazdamexico.com.mx Answers to many questions, including how to locate or contact a local Mazda dealership in Mexico, can be found here. E-mail: click on “Contactanos” at the top of the page at www.mazdamexico.com.mx...
Page 532 TEL: 1 (800) 263-4680 (in Canada) TEL: (684) 699-9347 (905) 787-7000 (outside Canada) ▼ PUERTO RICO/U.S. Virgin Island International Automotive Distributor Group, LLC. (Mazda de Puerto Rico) P.O. Box 191850, San Juan, Puerto Rico 00919-1850 TEL: (787) 641-1777 ▼ MEXICO Mazda Motor de Mexico Mario Pani 400 PB, Col.
Page 533: Reporting Safety Defects (U.s.a.)
You can also obtain other information about motor vehicle safety from http:// www.safercar.gov. NOTE If you live in the U.S.A., all correspondence to Mazda Motor Corporation should be forwarded to: Mazda North American Operations 200 Spectrum Center Drive Suite 100 Irvine, California 92618 P.O.
Page 534: Reporting Safety Defects (Canada)
Customer Information and Reporting Safety Defects Reporting Safety Defects Reporting Safety Defects (Canada) ▼ Reporting Safety Defects Canadian customers who wish to report a safety-related defect and concern to Transport Canada, Defect Investigations and Recalls, may telephone the toll free hotline 1-800-333-0510, or go to the Road Safety website at: https://www.tc.gc.ca/en/services/road.html 8-13...
Page 535: Warranties For Your Mazda
Emission Control Warranty  receive satisfactory servicing in other Replacement Parts and Accessories  countries. We strongly recommend Limited Warranty that you NOT take your Mazda outside Tire Warranty  the United States/Canada. NOTE United States Warranty information varies depending However, in the event that you are on the country.
Page 536: Registering Your Vehicle In A Foreign Country (Except United States And Canada)
Parts, servicing techniques, and tools necessary to maintain and repair your vehicle may be unavailable. There might not be an Authorized Mazda Dealer in the country you plan to take your vehicle. The Mazda warranty is valid only in certain countries.
Page 537 ▼ Add-On Non-Genuine Parts and Accessories Non-genuine parts and accessories for Mazda vehicles can be found in stores. These may ﬁt your vehicle, but they are not approved by Mazda for use with Mazda vehicles. When you install...
Page 538: Cell Phones Warning
Customer Information and Reporting Safety Defects Cell Phones Cell Phones Warning ▼ Cell Phones Warning WARNING Please comply with the legal regulations concerning the use of communication equipment in vehicles in your country: Use of any electrical devices such as cell phones, computers, portable radios, vehicle navigation or other devices by the driver while the vehicle...
Page 539: Event Data Recorder (U.s.a. And Canada)
EDR. certain crash or near crash-like situations, such as an air bag Mazda will not disclose any of the data deployment or hitting a road obstacle, recorded in an EDR to a third party data that will assist in understanding unless: how a vehicle’s systems performed.
Page 540: Recording Of Vehicle Data
Mazda and its subcontracting parties may obtain and use the recorded data for vehicle malfunction diagnosis, research and development, and quality improvement. Mazda will not disclose or provide any of the obtained data to a third party unless: An agreement from the vehicle ...
Page 541: Uniform Tire Quality Grading System (Utqgs)
Customer Information and Reporting Safety Defects Uniform Tire Quality Grading System (UTQGS) Uniform Tire Quality WARNING Grading System (UTQGS) The traction grade assigned to this tire is based on braking (straight ahead) ▼ Uniform Tire Quality Grading traction tests and does not include System (UTQGS) acceleration cornering (turning), hydroplaning, or peak traction...
Page 542 NHTSA and the tire manufacturers. The grade of tires available as standard or optional equipment on Mazda vehicles may vary with respect to grade. ALL PASSENGER VEHICLE TIRES MUST...
Page 543: Tire Labeling
Customer Information and Reporting Safety Defects Tire Information (U.S.A.) 14.Max. permissible inﬂation pressure Tire Labeling P215/65R15 95H is an example of a ▼ Tire Labeling tire size and load index rating. Here is Federal law requires tire manufacturers an explanation of the various to place standardized information on components of that tire size and load the sidewall of all tires.
Page 544 Customer Information and Reporting Safety Defects Tire Information (U.S.A.) the 45st week of 1997. After 2000 the numbers go to four digits. For “95” is the Load Index. This two-or example, the number 2102 means the three-digit number indicates how 21th week of 2002.
Page 545 Customer Information and Reporting Safety Defects Tire Information (U.S.A.) ▼ Information on Temporary Tires The grades represent the tire's ability to stop on wet pavement as measured Please refer to the sample below. under controlled conditions on speciﬁed government test surfaces of asphalt and concrete.
Page 546: Location Of The Tire Label (Placard)
Customer Information and Reporting Safety Defects Tire Information (U.S.A.) Location of the Tire Label “70” is the aspect ratio. This two-digit (Placard) number indicates the tire's ratio of height to width. ▼ Location of the Tire Label (Placard) You will ﬁnd the tire label containing tire inﬂation pressure by tire size and “D”...
Page 547 Customer Information and Reporting Safety Defects Tire Information (U.S.A.) NOTE WARNING Some spare tires require higher inﬂation pressure. Always check the tire inﬂation 8. Visually inspect the tires to make pressures on a regular basis according sure there are no nails or other to the recommended tire inﬂation objects embedded that could poke pressure on the tire label and in...
Page 548: Tire Maintenance
To equalize tread wear, rotate the tires which the tire beads are seated. every 16,000 km (10,000 miles) at the latest or sooner if irregular wear develops. Mazda recommends to rotate every 8,000 km (5,000 miles) to help increase tire life and distribute wear more evenly.
Page 549 Customer Information and Reporting Safety Defects Tire Information (U.S.A.) Improper wheel alignment NOTE  Out-of-balance wheel Tires degrade over time, even when  Severe braking they are not being used on the road. It  is recommended that tires generally be After rotation, inﬂate all tire pressures replaced when they are 6 years or to speciﬁcation on page 9-7 and...
Page 550: Vehicle Loading
Customer Information and Reporting Safety Defects Tire Information (U.S.A.) Overloading makes a vehicle harder to Vehicle Loading drive and control. It also increases the distance required for stopping. In cases ▼ Vehicle Loading of serious overloading, brakes can fail completely, particularly on steep WARNING grades.
Page 551 Customer Information and Reporting Safety Defects Tire Information (U.S.A.) listed on the tire label in order to be If the weight of the occupant increases, accurate. the cargo weight limit decreases by that much. SAMPLE GAW (Gross Axle Weight) is the total weight placed on each axle (front and rear) - including vehicle curb weight and all payload.
Page 552 Customer Information and Reporting Safety Defects Tire Information (U.S.A.) Do not use replacement tires with WARNING lower load carrying capacities than the originals because they may lower the Never Exceed Axle Weight Rating vehicle's GVWR and GAWR Limits: limitations. Replacement tires with a Exceeding the Safety Certiﬁcation higher limit than the originals do not Label axle weight rating limits is...
Page 553: Steps For Determining The Correct Load Limit
Customer Information and Reporting Safety Defects Tire Information (U.S.A.) Steps for Determining the Correct Load Limit ▼ Steps for Determining the Correct Load Limit Steps for Determining Correct Load Limit- (1) Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.”...
Page 554: Declaration Of Conformity
Customer Information and Reporting Safety Defects Declaration of Conformity Declaration of Conformity ▼ Keyless Entry System/Immobilizer System ▼ Tire Pressure Monitoring System 8-33...
Page 555 Customer Information and Reporting Safety Defects Declaration of Conformity ▼ HomeLink Wireless Control System 8-34...
Page 556 Customer Information and Reporting Safety Defects Declaration of Conformity ▼ Radio System 8-35...
Page 557 Customer Information and Reporting Safety Defects Declaration of Conformity ▼ Audio System 8-36...
Page 558 Customer Information and Reporting Safety Defects Declaration of Conformity ▼ Data Communication System U.S.A. 8-37...
Page 559 Customer Information and Reporting Safety Defects Declaration of Conformity Canada 8-38...
Page 560 Customer Information and Reporting Safety Defects Declaration of Conformity 8-39...
Page 561 Customer Information and Reporting Safety Defects Declaration of Conformity ▼ Front Radar Sensor System 8-40...
Page 562 Customer Information and Reporting Safety Defects Declaration of Conformity ▼ Rear Side Radar Sensor System 8-41...
Page 563 Customer Information and Reporting Safety Defects Declaration of Conformity 8-42...
Page 564 Customer Information and Reporting Safety Defects Declaration of Conformity ▼ Wireless Charger (Qi) 8-43...
Page 565 MEMO 8-44...
Page 566: Specifications
Speciﬁcations Technical information about your Mazda. Identiﬁcation Numbers....9-2 Speciﬁcations......9-4 Vehicle Information Labels... Speciﬁcations......9-4 ..........9-2...
Page 567: Vehicle Information Labels
Speciﬁcations Identiﬁcation Numbers ▼ Chassis Number Vehicle Information Open the cover shown in the ﬁgure to Labels check the chassis number. ▼ Vehicle Identiﬁcation Number The vehicle identiﬁcation number legally identiﬁes your vehicle. The number is on a plate attached to the cowl panel located on the left corner of the dashboard.
Page 568 Speciﬁcations Identiﬁcation Numbers ▼ Engine Number 1. Forward...
Page 569 Authorized Mazda Dealer for replacement. LN3 EFB is designed for i-stop system (FOR STOP & START). Only LN3 EFB should be used to ensure correct operation of i-stop system (FOR STOP & START). Consult an Authorized Mazda Dealer for details.
Page 570 Speciﬁcations Speciﬁcations Lubricant Classiﬁcation Brake ﬂuid SAE J1703 or FMVSS116 DOT-3 Periodic replacement is unnecessary. Replacement is necessary when the component is submerged in water. NOTE Refer to Introduction on (page 6-2) for owner's responsibility in protecting your investment. ▼ Capacities (Approximate Quantities) Item Capacity...
Page 571 Speciﬁcations Speciﬁcations ▼ Dimensions Item Vehicle speciﬁcation Overall length 4,720 mm (185.8 in) Overall width 1,920 mm (75.6 in) 17 inch wheel ve- 1,604 mm (63.2 in) hicle Without roof rail and roof antenna 20 inch wheel ve- 1,613 mm (63.5 in) hicle Overall height 17 inch wheel ve-...
Page 572 1,138 kg (2,509 lbs) ▼ Light Bulbs Exterior light/Interior light All the light bulbs are the LED type. The LED bulb cannot be replaced. Consult an Authorized Mazda Dealer when the replacement is necessary. ▼ Tires NOTE The tires have been optimally matched with the chassis of your vehicle.
Page 573 Speciﬁcations Speciﬁcations Standard tire (U.S.A. and Canada) Inﬂation pressure Tire size Front Rear 225/65R17 102H 250 kPa (36 psi) 250 kPa (36 psi) 245/45R20 99V 240 kPa (35 psi) 240 kPa (35 psi) (Mexico) Inﬂation pressure Tire size Front Rear 225/65R17 102H 250 kPa (2.5 bar, 36 psi) 250 kPa (2.5 bar, 36 psi)
Page 574: Index
Index 10-1...
Page 575 Index Body Lubrication....... 6-22 Bottle Holder......5-48 Accessory Socket....... 5-41 Brakes Active Driving Display....4-34 Brake assist......4-71 Adaptive Front Lighting System Brake override system... 4-71 (AFS)........4-93 Electric Parking Brake (EPB)..4-66 Add-On Non-Genuine Parts and Foot brake......4-66 Accessories....... 8-16 Pad wear indicator....4-71 Advanced Key Parking brake.......
Page 576 Index Cruise Control......4-198 Turbocharged vehicles (SKYACTIV- Cruise control switch..4-198 G 2.5T)........3-53 Cruise standby indication (white)/ Winter driving...... 3-50 cruise set indication (green)..Dynamic Stability Control ......... 4-198 (DSC)........4-80 Cup Holder......5-47 TCS/DSC indicator light..4-80 Customer Assistance (Canada)..8-6 Customer Assistance (Mexico)..
Page 577 Distance-to-empty....4-24 Engine coolant temperature Hazardous Driving.....3-48 gauge........4-21 Hazard Warning Flasher..... 4-60 Fuel gauge......4-22 Headlights Indication/indicator lights..4-30 Coming home light....4-51 i-ACTIVSENSE display... 4-26 Flashing........4-51 Mazda intelligent Drive Select High-low beam....4-51 (Mi-Drive) Display....4-25 Leaving home light....4-51 10-4...
Page 578 (LDWS)........ 4-95 interiors....... 6-52 Lane-keep Assist System Instrument panel top (Soft pad) (LAS)........4-137 maintenance......6-51 Mazda Radar Cruise Control with Leather upholstery Stop & Go function (MRCC with maintenance......6-50 Stop & Go function)... 4-117 Panel maintenance....6-51 Pre-crash safety technology... 4-89 Plastic part maintenance..
Page 579 Chassis number......9-2 Connected Service....5-36 Engine number....... 9-3 Mazda Connect Basic Motor vehicle safety standard Operations......5-19 label........9-2 Mazda intelligent Drive Select (Mi- Tire pressure label....9-2 Drive) (AWD)......4-83 Vehicle emission control Mazda intelligent Drive Select (Mi- information label....9-2 Drive) (FWD)......4-82 Vehicle identiﬁcation...
Page 580 Index Mazda Radar Cruise Control with Rear Cross Traffic Alert (RCTA) ... Stop & Go function (MRCC with Stop ..........4-113 & Go function) System Rear Cross Traffic Alert (RCTA) Warnings........7-40 Warning Beep......7-39 Message Indicated on Multi- Rear Door Child Safety Locks..3-18 information Display....
Page 581 Index Safety Defects, Reporting SRS Air Bags (U.S.A.)........8-12 Driver and front passenger Saving Fuel and Protection of the occupant classiﬁcation Environment......3-47 system......... 2-68 Scheduled Maintenance How the SRS air bags work..2-61 Canada........6-6 Limitations to SRS air bag..2-66 Mexico........
Page 582 Index Tire Information Location of the tire label Ultrasonic Sensor....4-196 (placard)......8-25 USB Power Outlet..... 5-43 Steps for determining the correct load limit......8-32 Tire labeling......8-22 Tire maintenance....8-27 Vehicle Information Labels Vehicle loading.....8-29 Chassis number......9-2 Tire Pressure Monitoring Engine number.......
Page 583 Liftgate Door-lock Switch Wiper Inoperable Warning Beep..7-37 Replacing Rear Window Wiper Lights-on reminder....7-36 Blade........6-25 Mazda Radar Cruise Control with Replacing windshield wiper Stop & Go function (MRCC with blades........6-23 Stop & Go function) system Wireless Charger (Qi)....5-43 warnings......