Honda EX2200 Owner's Manual page 25

7. Inspect the plug washer and then thread the plug in by hand to prevent
cross threading.
8. After a new spark plug has been seated by hand, it should be tightened
l/2 turn with a wrench to compress its washer.
If a used plug is being reinstalled, it should only require l/8 to l/4 turn
after being seated.
CAUTION:
l
The spark plug must be securely tightened. An improperly tightened plug
can become very hot and could possibly damage the generator.
l
Never use a spark plug with an improper heat range.
9. Close and latch the rear maintenance cover.
23