Setting A Rescue Device In The Startup Sequence - Lenovo ThinkCentre A52 Quick Reference Manual

Panel) to reinstall the device driver. Not all device drivers can be
reinstalled using this program. In the Add New Hardware program,
when prompted for the device driver that you want to install, click Have
Disk and Browse. Then select the appropriate device-driver (.inf) file
from the device subfolder.
v In the device subfolder, look for a setup.exe file. Double-click SETUP.EXE
and follow the instructions on the screen.

Setting a rescue device in the startup sequence

Before you start Rescue and Recovery from a CD, DVD, USB HDD or any
external device, you must first change the startup sequence in the Setup Utility.
1. While turning on your computer, press and release the F1 key repeatedly to
enter the Setup Utility.
2. Select Startup and press enter.
3. In the Startup sequence, select your startup device and follow the
instructions on your screen.
4. Press F10 and press enter.
5. Select Yes to save changes and press enter.
Note: If you are using an external device, you first must turn off your
computer before connecting the external device.
18
Quick Reference