Electrical Connection - Electrolux ERES31800 Instruction Book

Electrolux refrigerator instruction manual
Table of Contents

Advertisement

3
- Place the gas cylinder with adapter in
the valve and ensure that the valve
bracket hooks are under the
counterhold on the adapter (5). Then
turn up the bracket lever (6) in one
continuous movement. See the
illustration and the instructions on the
inside of the service hatch.
5
- Unlock the water dispenser and drain
off a further 1.5 litres (2.5 pints) of
water or until there are signs that the
carbonated water in the water
dispenser is starting to run.
- The system is now ready for use. In
order to obtain the best possible
performance from the refrigerator, wait
until the set temperature is reached. A
low temperature provides more carbon
dioxide, a high temperature less
carbon dioxide.
Re-hanging the door.
It is not possible to re-hang the door.
4
6
The water supply goes through the
hinge to the water dispenser. Contact
your dealer for more information.
Electrical con n ection
This appliance must be earthed.
If the plug that is fitted to your
appliance is not suitable for your
socket outlet, it must be cut off and
the appropriate plug fitted.
Remove the fuse from the cut off
plug.The cut off plug should then be
disposed of to prevent the hazard of
socket inanother part of your home.
The wires in the mains lead are
coloured in accordance with the
following code:
Green and yellow
Blue
Brown
If you fit your own plug, the colours of
the Wires in the mains lead of your
appliance may not correspond with
the markings identifying the terminals
in your plug, proceed as follows:
Connect the Green and Yellow (earth)
wire to the terminal in the plug which is
marked with the letter "E" or the earth
symbol
or coloured greeen and
yellow.
Connnect the blue (neutral) wire to the
terminal in the plug which is marked
with the letter "N" or coloured black
-Earth
-Neutral
-Live
24

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents