Table of Contents
Advertisement
Quick Links
Blackhawk Automotive is a Licensed Trade Mark
Hydraulic Transmission Jack, Telescopic
Operating Instructions & Parts Manual
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
!
Obey all safety messages that follow this symbol to avoid possible injury or death.
ADVERTENCIA
!
• Leer, comprender, y seguir las instrucciónes antes
de utilizar el aparato.
• El manual de instrucciónes y la información de
seguridad deben estar comunicado en lengua del
operador antes del uso.
• No seguir estas indicaciónes puede causar daños
personales o materiales.
Read this manual and follow all the Safety Rules and Operating Instructions before using this product.
Made by
SFA Companies, Kansas City, MO
Model
BH7000
WARNING
!
To avoid crushing and related injuries:
NEVER work on, under or around a
load supported only by a hydraulic
jack. Immediately transfer the load to
an appropriate work station.
10939 N. Pomona Ave. Kansas City, MO 64153
sales@blackhawk-automotive.com
Capacity
700 lb.
SFA Companies
Made in PRC
BH7000-M0 12/07
Advertisement
Table of Contents
Related Manuals for Blackhawk Automotive BH7000
Summary of Contents for Blackhawk Automotive BH7000
- Page 1 Blackhawk Automotive is a Licensed Trade Mark Made by SFA Companies, Kansas City, MO Hydraulic Transmission Jack, Telescopic Operating Instructions & Parts Manual Model Capacity BH7000 700 lb. This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
-
Page 2: Product Description
SAFETY and GENERAL INFORMATION Save these instructions. For your safety, read, understand, and follow the information provided with and on this jack before using. The owner and operator of this equipment shall have an understanding of this jack and safe operating procedures before attempting to use. - Page 3 PREPARATION Assembly (refer to Figure 1) Tools required: M16 & M18 wrench. 1. Four major parts should be included in the package: (a) Hydraulic unit; (b) Upright Post; (c) Saddle Assembly; (d) 2 pieces of base half with hardware. 2. Attach the base halves to the upright post, then secure using threaded pins, washers and M12 nuts. 3.
- Page 4 WARNING • Read, understand, and follow all printed material provided with and on this product before use. • Do not exceed rated capacity. • Use only on hard, level surfaces. • Adequately support the vehicle before starting repairs. • If loaded jack must be moved, make certain that load is secured by appropriate means, is stable, is in the lowest possible position, is moved over a smooth, hard level surface and that the lifting platform is level.
-
Page 5: Troubleshooting
MAINTENANCE Important: Use only good grade hydraulic jack oil. Avoid mixing different types of fluid and NEVER use brake fluid, turbine oil, transmission fluid, motor oil or glycerin. Improper fluid can cause premature failure of the jack and the potential for sudden and immediate loss of load. Hein-Werner HW93291 or equivalent is recommended. Adding oil 1. - Page 6 REPLACEMENT PARTS (page 6 & 7) Not all components of the jack are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. When ordering parts, give Model number, serial number and parts description. Call or write for current pricing: SFA Companies, 10939 N.
- Page 7 Replacement Parts List for Models BH7000: Item Part Number Description T250-01000-000 Base Half/Leg T250-00005-000 Steel Rod see item#35 or hardware kit Nut M12 see item#35 or hardware kit Lock Washer see item# 34 3” Caster see item#36 or hardware kit Lock Washer see item#36 or hardware kit Bolt M10x25...
- Page 8 ONE YEAR LIMITED WARRANTY For a period of one (1) year from date of purchase, SFA Companies will repair or replace, at its option, without charge, any of its products which fails due to a defect in material or workmanship under normal usage. This limited warranty is a consumer's exclusive remedy.
Need help?
Do you have a question about the BH7000 and is the answer not in the manual?
Questions and answers