Download Print this page
Black Box Receive Module for ServSwitch KV1702C Manual
Black Box Receive Module for ServSwitch KV1702C Manual

Black Box Receive Module for ServSwitch KV1702C Manual

Receive module for servswitch multi hub

Advertisement

Quick Links

BLACK BOX and the
logo are registered trademarks, and ServSwitch and ServSwitch Multi are trademarks, of Black Box Corporation. Any other trademarks mentioned
in this manual are the property of their respective owners.
© Copyright 2000. Black Box Corporation. All rights reserved.
CUSTOMER
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
SUPPORT
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
INFORMATION
Web site: www.blackbox.com • E-mail: info@blackbox.com
Receive Module for ServSwitch™ Multi Hub
Receive Modules (product code KV1702C) and their companion Transmit Modules (KV1701C) are the
components of the ServSwitch Multi Hub (KV170RA) that handle its communication with other ServSwitch
Multi units. Here's how to configure and install your Receive Module:
1. First—before you do anything else—plan your layout. Figure out which of your ServSwitch Multi system's
Transmit-Card ports you want to connect to the Receive Module's ports. You might want to refer to the
sample layouts in the chapter about the Hub in the manual for the ServSwitch Multi system. If you're not
sure what the best arrangement of cable connections would be, please call Black Box Technical Support.
(We strongly encourage you to call Black Box Tech Support anyway, to discuss your application, before you
perform any large or complex ServSwitch Multi installation.)
2. If you are installing this Module at the same time you install the Hub: If you haven't done so already, install the fan
assemblies and power supplies in your Hub. Plug in the power supplies and turn them ON.
Make sure you set the Hub's chassis ID before you make cable connections from any
Module installed in this Hub to any CAT5 Expansion Cards in other ServSwitch Multi
units! Refer to the chapter about the Hub in your ServSwitch Multi manual for
instructions on how to do this.
Doc. No. 590-156-001 Rev. A
CUSTOMER
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
SUPPORT
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
INFORMATION
Web site: www.blackbox.com • E-mail: info@blackbox.com
SEPTEMBER 2000
KV1702C
NOTE

Advertisement

loading

Summary of Contents for Black Box Receive Module for ServSwitch KV1702C

  • Page 1 BLACK BOX and the logo are registered trademarks, and ServSwitch and ServSwitch Multi are trademarks, of Black Box Corporation. Any other trademarks mentioned in this manual are the property of their respective owners. © Copyright 2000. Black Box Corporation. All rights reserved.
  • Page 2 RECEIVE MODULE FOR SERVSWITCH™ MULTI HUB RECEIVE MODULE FOR SERVSWITCH™ MULTI HUB NOTE From over 125 ft. (38.1 m) From over 225 ft. (68.6 m) Up to 125 ft. (38.1 m) to 225 ft. (68.6 m) to 250 ft. (76.2 m) If it will be easier for you to configure the Receive Module while you’re looking at cables you’ve already installed, feel free to attach your expansion cables to the Module (refer to step 4) before you do step 3.