Acer X221 Service Manual page 35

Assembly process
Picture Description
CHECKING THE FOAM CUSHION AND
PUT IT TO PRODUCTION LINE
CHECKING THE PCB SHIELDING AND
PUT IT TO PRODUCTION LINE
STICK 2*PCS RUBBER ON THE
LOCATION OF SHIELDING AS LEFT
SHOW
PUT 1*PCS FLOW CARD ON THE
PRODUCTION LINE
CHECKING THE MAIN BOARD
WHETHER BAD
CHECKING THE LVDS CABLE AND
INSERT IT TO THE SINK OF MAIN
BOARD
CHECKING THE CONNECT CABLE OF
BUTTON BOARD AND INSERT IT TO
THE SINK OF MIAN BOARD
PUT THE FINISHED SUBASSEMBLY TO
THE PRODUCTION LINE