Techniques Avancees CODESOFT Sentinel Print Pack User Manual page 19

Attention:
Certain kinds of data sources are not associated with a specific file-
name, as they are reserved for paths and file name extensions. For
those data sources, the Data source sentinel will analyze all exten-
sion files specified in the directory.
Note: Print documents will be processed and then erased.
Documents that do not conform to the method of analysis will be
automatically destroyed. We therefore recommend that you specify a
directory dedicated exclusively to the CODESOFT Data source
sentinel.
Structure of the Print Document
Documents are composed of a header that includes every variable
CODESOFT Run Time uses to print labels, followed by a group of values
to be assigned in turn to the variables.
Each line of the Print Document corresponds to a label specification.
Here too, the variables can be:
w CODESOFT control variables; or
w the label's Import variables.
Note:
To be recognized, the header must refer to the name of the label to
be printed.
Files appear in table form. The first line of the table is the header specifica-
tion, which starts with the name of the label to be printed (CODESOFT
system variable), followed by the different Import variables that make up
the label. At the end of the header, the system variable LAB_QUANTITY
allows you to reset the number of labels to be printed, since the default
value set from the interface is «1.»