Table of Contents
Advertisement
Each line corresponds to a label:
[file header]
[start header]
[variable1]
[start table]
[value1]
[start table]
[value1]
...
[start table]
[value1]
The variables referred to will be either CODESOFT control variables or
the label's Import variables.
Characteristics of the Print Document
Print files, whether made up of direct and/or table assignments, must obey
the following rules.
Header
To be recognized by CODESOFT Sentinel Print Pack, files must begin
with a header specified using the Sentinel Print Pack interface.
Example:
The default header suggested in the interface, which is "SENTINEL," re-
quires files to begin with the following sequence: "SENTINEL"
Label Referred To
CODESOFT Run Time print jobs must be associated with a label file
name.
This can be done:
w either through direct assignment (the name of the variable can be
specified in Sentinel Print Pack); or
w through table assignment.
In the case of table assignments, make sure that the name of the
CODESOFT control variable (for example: "LAB_NAME") is included in
the specification of the table header.
[separator]
...
[separator]
...
[separator]
...
...
...
...
[separator]
...
[variableN]
[end header]
[valueN]
[end table]
[valueN]
[end table]
...
...
[valueN]
[end of table]
Advertisement
Chapters
Table of Contents
