Download Print this page

Pro-Ject Audio Systems Speed Box SE II Instructions For Use page 4

Technical specifications Pro-Ject Speed Box SE II

speeds:

Nominal

Quartz oscillator:

Pitch control:

Turntable connection:

120V model only:

230V model only:

Outboard power supply:

Dimensions W x H x D (D with sockets): 103 x 72 x 144 (144)mm

Weight:

Service

Should you encounter a problem which you are not able to alleviate or identify, please contact your dealer for

further advice. Only when the problem cannot be resolved there should the unit be sent to the responsible

distributor in your country.

Warranty

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions

for use. Modification or change to any part of the product by unauthorized persons release the

manufacturer from any liability over and above the lawful rights of the customer.

PRO-JECT is a Registered Trademark of H. Lichtenegger.

This guide was produced by: Audio Trade GmbH

* 33 and 45 r.p.m. ** Optional 78 r.p.m.

Speed stability ± 0,001%

±20 steps/0,1 r.p.m.

16V/AC 190mA max. (3W power consumption max.)

120V/AC 25mA max. (3W power consumption max.)

230V/AC 13mA max. (3W power consumption max.)

16V/1.000mA AC, suitable for your country's mains supply

1.360g without power supply

The information was correct at the time of going to

press. The manufacturer reserves the right to make

changes to the technical specification without prior

notice as deemed necessary to uphold the ongoing

process of technical development.