Advertisement
Dear music lover,
thank you for purchasing a PRO-JECT AUDIO Speed Box SE II. * The unit permits electronic speed change of
your Pro-Ject record player between 33 and 45 r.p.m. and also permits the replay of shellac records by
allowing ** 78 r.p.m. with an appropriate pulley and cartridge.
The replay speed can be increased and decreased in twenty steps of 0,1 r.p.m.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
Warning of a hazard for the user, the unit or possible misuse.
Important notice.
* The Pro-Ject Debut III E, Debut III/Phono SB, 1 Xpression III Comfort, 2 Xperience Comfort,
RPM 6.1 SB and RPM 6.1 SB SuperPack may not be used with the Speed Box.
Connecting the record player
Output
Output
~ 16V
~ 16V
3W
3W
Connect the power cable supplied (polarity
and to the power socket on your turntable. The original power supply is then no longer required.
Turntables without an external power supply should be connected to the Output socket (50Hz models to
Output ~230V 3W / 60Hz models to Output ~120V 3W) on the Speed Box SE II. Check the label before
connecting to ensure compliance with the mains rating in your house.
The Speed Box SE II is not designed to run with capacitive loads.
~230V /~120V and ~16V power output cannot be used simultaneously.
Power output max. 3W/AC (16V/190mA or 230V/13mA / 120V/25mA).
Make all connections whilst the Speed Box SE II is disconnected from the power supply.
Mains power connection
The Speed Box SE II is supplied with a power supply suitable for your country's mains supply. Check the label
before connecting to ensure compliance with the mains rating in your house. Connect the low voltage plug
from the power supply to the socket Input ~16V 1A before connecting the power supply to the mains.
Stand By
Press and hold the button St.By to put the Speed Box SE II into stand by. Pressing the button St.By will switch
on the Speed Box SE II from stand by.
Switching on and off
Pressing the power switch of your Pro-Ject turntable alternately starts or stops the motor.
2
© Audio Trade GmbH · Pro-Ject Speed Box SE II · Revision 15.10.10/15.12.10
Input
Input
Output
Output
~ 16V
~ 16V
~ 230V
~ 230V
1A
1A
3W
3W
) to the Output ~16V 3W socket on the Speed Box SE II
+
Advertisement
