Information
Reset the NVR
The RESET function of the NVR allows you to set the NVR to its factory default
settings.
To reset the NVR, please keep your NVR connected to your network and follow the
steps:
1. Insert the reset pin into the RESET hole at the side of the NVR.
2. Stab the RESET button with the pin for 5 seconds.
3. All settings are reset to their factory default settings.
All the settings you've configured in the NVR will be lost after
resetting. Please make sure to
resetting.
Attention
8
This function may or may not be available depending on the NVR model you purchase.
Please consult your network administrator or ISP for the IP
address.
8
61
Backup settings
you need before