Table of Contents
Advertisement
Go to the "Advanced" page and click the menu "System"
page. The Log page keeps a record on the settings or change made in the NVR
system.
System Settings
Go to the "Advanced" page and click the menu "System"
display the page of System Settings. You may define the "Device Name" for the NVR
you use.
To enable UPnP:
Check "Enable" if you want the NVR to act as UPnP service. And you'll be able to
visit the NVR from "My Network Places".
To set Time Zone:
1. Select Time Zone from the drop-down list.
2. Check the "Automatically adjust for daylight saving time changes" option if
needed.
Click "Submit" to save the settings.
Date & Time
Go to the "Advanced" page and click the menu "System"
the page of Date & Time. You may set the date and time of the NVR. When the time
is set, the connected network cameras will automatically synchronize the time with
the NVR and will show in four channels interface and recorded videos.
"Log" to display the Log
"Date & Time" to display
48
"System Settings" to
Advertisement
Table of Contents
