Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Parasound Zbreeze
-
Page 2: Important Safety Instructions
20. Wall or Ceiling Mounting — Mount the product to a wall or ceiling only as recommended. 21. Heat — The product should be situated away from heat sources such as radiators, heat registers and stoves. www.parasound.com... -
Page 3: Table Of Contents
TABLE OF CONTENTS Introduction ........... Applications . -
Page 4: Introduction
Two trigger wires, one with 2.5 mm sub-mini plugs, one with a 2.5mm and a 3.5mm mini plug • Please inspect the unit now and contact your Parasound Dealer promptly if you see evidence of shipping damage. Save the carton and packing inserts in case you move or in the event you need to ship your amplifier for repair. -
Page 5: Rack Mounting
The Zbreeze must be mounted horizontally. It occupies only half the width of a single rack space in a standard 19” equipment rack. For rack mounting, you can fasten it to another Parasound Z Custom model by using the Parasound SBS (Side-by-Side) mounting kit. You can also mount a single Zbreeze in the rack with the accessory Zblank panel. -
Page 6: Rear Panel Connections And Settings
REAR PANEL CONNECTIONS AND CONTROLS Connection Precautions Disconnect the AC cord before making or changing any trigger wire connections. Make sure there is no strain or tension on any wires that could cause them to pull loose. Mode Switches for Turn On and Turn Off Turn On Switch The Turn On switch has three positions that control how the Zbreeze is turned on. - Page 7 In jack and the other end into the system controller’s or preamp’s 12V trigger output. Some components, including Parasound Surround Controllers, use 3.5 mm trigger output jacks, so we have also included a trigger wire with 2.5mm and a 3.5mm mini plugs.
-
Page 8: Front Panel Controls
Note: The default fan speed is Medium. Maintaining Your Zbreeze Your Parasound Zbreeze requires no periodic maintenance other than an occasional smile of appreciation for the job it does to protect your components. It has no user-serviceable parts inside. To avoid the risk of electric shock, do not remove its top cover. The exterior can be... -
Page 9: If You Require Assistance
Warranty Repair Information Call your Parasound dealer first. If the dealer can’t help you with your problem we encourage you to call Parasound’s Technical Service Department, toll-free at 1-866-770-8324, Monday – Friday, 8am – 4pm Pacific time. We can suggest other diagnostic tests you can easily perform. -
Page 10: Specifications
PARASOUND ZBREEZE SPECIFICATIONS Air Flow 25 CFM, fan speed low 50 CFM, fan speed medium 75 CFM, fan speed high Acoustical Noise 20 dB, fan speed low 35 dB, fan speed medium 50 dB, fan speed high Fans, per fan (three total) - Page 11 NOTES Notes:...
- Page 12 Rev 0.92 © Parasound Products, Inc. 2005...