Black Widow Security BW 690-C Owner's Manual

Factory keyless upgrade

FA C T O RY K E Y L E S S U P G R A D E

Congratulations on your purchase of the Factory Keyless

Upgrade security system. Your Factory Keyless Upgrade is man-

ufactured in the U.S.A. and designed by leading security experts

using the latest state of the art technology.

Items supplied with the Factory Keyless Upgrade

• Receiver and control module

• Valet/override switch

• Wiring harness, fuseholder & fuse

• LED status indicator

• Siren (optional)

• Shock sensor (optional)

O W N E R ' S M A N U A L

Table of Contents

Do you have a question about the BW 690-C and is the answer not in the manual?

Page 1 FA C T O RY K E Y L E S S U P G R A D E O W N E R ’ S M A N U A L Congratulations on your purchase of the Factory Keyless Upgrade security system.
Page 2 The Factory Keyless Upgrade is designed to interface with your existing factory keyless system and will not interfere with its operation.The system comes with an L.E.D. and override switch. This system may also come with dual zone shock sensor and multi tone siren.
Page 3 press and hold your valet/override switch in for approximately 5 seconds, the L.E.D. will turn on solid.You vehicle’s system is in Valet Mode. Deactivate Valet Mode:It will stay in Valet until you repeat the procedure and the L.E.D. will turn off. Security Modes: Your system can be programmed 2 differ- ent ways depending on the vehicle and the additional security components that are added to it.

690-c