•
I N S T A L L A T I O N
I N S T A L L A T I O N
Please read this Black Widow manual carefully before attempting to install this system.
BEFORE INSTALLING THE BW-1600
• DO read through this installation manual.
• DO NOT install the alarm brain in an engine compartment.
• The alarm may arm itself when power is first connected.This is a normal condition.
ITEMS SUPPLIED WITH THE BW-1600
BW-1602 Receiver and Control Module
BW-385 2-Button, Code Learning
Transmitters (2)
MTS-20W Six-tone, soft chirp, 120 dB Siren
BW-12016DL Door Lock Harness
OPTIONAL ACCESSORIES
Radar Field Sensor.........................................MAS-2
Window Rollup.............................................WRM-2
Power Door Lock........................................PDL-50
Relay......................................................................SPDT
5-wire Door Lock relay & socket .BRS-008PR
(+) Door Lock Inverter.............................BW-345
SPECIFICATIONS
Operating voltage ...............+12 VDC Neg. Ground
Code Learning ......................................3 Codes Max.
Current consumption .........5 mA (max) disarmed.
Siren output drive ......................................3 Amperes
Automatic reset........................................60 seconds.
Door Lock/Unlock Output ...................(-) 500 mA.
Channel 2 Output Drive ........(-) 500 mA variable.
B
L
A
C
K
W
I
BW-260P Valet/Override Switch
BW-180P LED Status Indicator
BW-12016 Wiring Harness, Fuseholder, & Fuse
BW-296P Dual Zone Electronic Shock Sensor
Backup Battery .......................................................BW500
Remote Starting.................................................RAS-101
Trunk Release ........................................................TR-100
Relay Socket ........................................................BRS-003
Glass Sensor.......................................................BWS-200
Remote control transmit freq.............................310 mHz.
Passive arming delay ............................30 Seconds approx.
Auxiliary output drive..........................250 mA maximum.
Flashing output drive ............................10 Amp maximum.
Trigger inputs..............................................1) Neg. pnswtch.
1) Pos. pnswtch. 1) Neg. sensor or aux. pnswtch.
D
O
W
M A N U A L
M A N U A L
•