Energy Saving Tips - Electrolux ÖKO-SANTO 1554-6 iU Operating And Installation Instructions

Built-in refrigerator
Table of Contents

Advertisement

– butyric acid;
– cleansers which contain acetic acid.
Do not allow such substances to come into contact with appliance
parts.
• Do not use any abrasive cleansers.
Remove the food from the refrigerator. Store it in a cool place, well
covered.
Switch the appliance off and remove the plug from the mains, or dis-
connect from the electricity supply
Clean the appliance and the interior accessories with a cloth and
lukewarm water. Commercially available dish washing detergents may
also be used.
After cleaning wipe with fresh water and rub dry.
An accumulation of dust will affect
the performance of the appliance and
cause excessive electricity consump-
tion. The structure of the appliance
permits you to clean the rear zone
close to the wall, using a vacuum
cleaner.
Remove the plinth (1), then the venti-
lation grid (2);
Carefully pull the air deflector out (3),
checking that there is no water left
from the defrosting.
Check the water drain hole (F) under
the vegetable drawers of the fridge is
not blocked. Clear a blocked drain hole
with the aid of the green peg (P) in the
pack of accessories included with the
appliance.
After everything is dry place appliance
back into service.

Energy Saving Tips

• Do not install the appliance near boilers, radiators or other sources
of heat. High ambient temperatures cause longer, more frequent
operation of the compressor.
• Ensure sufficient air circulation and exhaust at the appliance base
and at the back wall of the appliance. Never cover air vent
openings.
• Do not place warm foods into the appliance. Allow warm foods to
cool first.
2
1
3
P
F
19

Advertisement

Table of Contents
loading

Table of Contents