Troubleshooting Davinci - Olivetti Da Vinci DV2 Instruction Manual

B. TROUBLESHOOTING DAVINCI
When the unit is not functioning properly, refer to the following table for
possible solutions:
Problem
The display remains blank after tapping on OK or On
Poor display contrast.
The unit is on, but pressing buttons and tapping touch
buttons has no effects.
"Memory full" displayed.
Tapping a touch button does not
corresponding function.
The daVinci turns off unexpectedly.
I forgot the password and the unit is locked.
Records seem to be missing.
Low Battery warning.
.
• Adjust the LCD contrast using the contrast knob
on the left side of the daVinci.
• Install new batteries.
• Adjust the LCD contrast using the contrast knob
on the left side of the daVinci.
• Reset the unit, being careful not to clear memory.
• The memory in daVinci is full or nearly full. Delete
any unnecessary data. You can always check the
memory capacity by tapping Menu, System,
Memory.
• Reset the unit, being careful not to clear memory.
activate the
• The daVinci is set to turn off automatically after a
period of inactivity. You can adjust the time
before automatic turn off by tapping Menu,
System and setting the Auto Shut-off to 1, 2, 3, 4
or 5 minutes.
• If you have assigned a password and the daVinci
is locked, the only way to continue using the PDA
is to clear all memory by resetting the unit.
• Choose to display both Business and Personal
categories. Verify that both B and P are indicated
on the display.
• Replace both AAA alkaline batteries with new
batteries before synchronizing.
42
Solution