Your Nokia E51; Welcome; Settings Wizard; Standby Modes - Nokia E51 User Manual

Your Nokia E51

The images in this guide may differ from your device display.

Welcome

When you switch on your device for the first time, the Welcome application
opens. Select from the following:
Tutorial provides information about your device and shows you how to
•
use it.
Switch enables you to transfer content, such as contacts and calendar
•
entries, from a compatible Nokia device.
devices," p. 10.

Settings wizard

helps you configure various settings.
•
wizard," p. 9.
Operator contains a link to your operator's home portal.
•
To open the Welcome application later, select
The available items may vary between regions.
Settings wizard
Select

Menu

Tools Sett. wizard.
> >
Settings wizard configures your device for settings based on your network
operator information. To use these services, you may have to contact your
service provider to activate a data connection or other services.
The availability of the different settings items in Settings wizard depends on
the features of the device, SIM card, wireless service provider, and the
availability of the data in the Settings wizard database.
If Settings wizard is not available from your service provider, it may not
appear in the menu of your device.
To start the wizard, select Start. When you use the wizard for the first time,
you are guided through the settings configuration. If there is no SIM card
inserted, you need to select the home country of your service provider, and
your service provider. If the country or service provider suggested by the
wizard is not correct, select the correct one from the list. If the settings
configuration is interrupted, the settings are not defined.
To access the main view of the Settings wizard after the wizard has finished
the settings configuration, select OK.
In the main view, select Options
Operator — Configure operator-specific settings such as MMS, internet,
•
WAP, and streaming settings.
E-mail settings — Configure e-mail settings.
•
Video sharing — Configure video sharing settings.
•
If you are not able to use Settings wizard, visit the Nokia phone settings web
site.

Standby modes

Your device has two different standby modes: active standby mode and
standby mode.

Active standby

After you have switched on your device and it is
ready for use, but you have not entered any
characters or made other selections, the device is
in the active standby mode. In the active standby
mode, you can view different indicators such as
network operator indicators or indicators for
alarms, and applications you want to access fast.
To select applications that you want to access
from active standby, select Menu
Settings General Personalisation
> >
Standby mode Active standby
>
To change the functions of the selection keys in
active standby, select Menu Tools
>
Settings General Personalisation
> >
Standby mode > Shortcuts.
To use the basic standby mode, select
General Personalisation
> >
See "Transfer content between
See "Settings
Menu Help > Welcome.
>
and from the following:
Tools
> >
>
apps..
>
>
Menu Tools Settings
> >
Standby mode Active standby
>

Standby

In the basic standby mode, you can see your
service provider, time, and different indicators,
such as indicators for alarms.
To view the most recently dialled numbers, press
the call key. Scroll to a number or name, and press
the call key again to call the number.
To call your voice mailbox (network service), press
and hold 1.
To view calendar information, scroll right.
To write and send text messages, scroll left.
To change these shortcuts, select
Tools Settings
> >
Personalisation
>
Menu
Select Menu.
The menu is a starting point from which you can
open all applications in the device or on a memory
card.
The menu contains applications and folders,
which are groups of similar applications. All
applications you install in the device yourself are
by default saved in the
To open an application, scroll to it, and press the
scroll key.
To view the applications in a list, select
Change view List
>
view, select Options
view.
To make the application icons and folders animated, select
animation > On.
To view the memory consumption of different applications and data stored
on the device or memory card and to check the amount of free memory,
select Options Memory
>
To create a new folder, select
To rename a new folder, select
To rearrange the folder, scroll to the application you want to move, and select
Options > Move. A check mark is placed beside the application. Scroll to a
new location, and select OK.
To move an application to a different folder, scroll to the application you
want to move, and select
OK.
To download applications from the web, select
applications.
Common actions in several
applications
You can find the following actions in several applications:
To change the profile, or switch off or lock the device, press the power key
briefly.
If an application consists of several tabs (see
figure), open a tab by scrolling right or left.
To save the settings that you have configured in
an application, select Back.
To save a file, select
different saving options depending on the
application you use.
To send a file, select
send a file in an e-mail or multimedia message, or
using Bluetooth connectivity or infrared.
>
To copy, press and hold the shift key, and select
> Off.
the text with the scroll key. Press and hold the shift
key, and select Copy. To paste, scroll to where you
want to paste the text, press and hold the shift key, and select Paste. This
method may not work in applications that have their own copy and paste
commands.
To select different items, such as messages, files, or contacts, scroll to the
item you want to select. Select
one item or Options
Menu
>
General
>
Standby mode > Shortcuts.
Installations folder.
Options
>
view. To return to the grid
Change view Grid
> >
details.
Options New folder.
>
Options > Rename.
Options Move to folder, the new folder, and
>
Options
Options > Save. There are
Options > Send. You can
Options Mark/Unmark
>
Mark/Unmark Mark all to select all items.
> >
Options Icon
>
Download
>
9
Mark to select
>