Alpine SWD-1600 Owner's Manual

Owners Manual
SWD-1600
Class D Amplifier Active Subwoofer
Please follow these instructions for your safety
Introduction:
•
Please read this owners manual thoroughly to familiarise yourself with each control and function. We at
Alpine hope that your new SWD-1600 will give you many years of listening enjoyment.
In case of problems when installing your SWD-1600, please contact your authorised Alpine dealer.
CAUTION
DO NOT DISASSEMBLE OR ALTER. Doing so may result in an accident, fire or electric shock.
KEEP SMALL OBJECTS SUCH AS BOLTS OR SCREWS OUT OF THE REACH OF
CHILDREN. Swallowing them may result in serious injury. If swallowed, consult a doctor
immediately.
USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES. Failure to do to may result
in fire or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are
not sure.) Failure to do so may result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to electrical shorts.
DO NOT SPLICE INTO ELECTRICAL CABLES. Never cut away cable insulation to supply power
to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire
or electric shock.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS. Arrange
the wiring and cables in compliance with the manual to prevent obstructions when driving. Cables
or wiring that obstruct or hang up on places such as the steering wheel, gear lever, brake pedals,
etc. can be extremely hazardous.
DO NOT DAMAGE PIPES OR WIRING WHEN DRILLING HOLES. When drilling holes in
the chassis for installation, take precautions so as not to contact, damage or obstruct pipes,
fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.
a
This symbol means important instructions.
Failure to heed them can result in serious injury or death.
EN