NETGEAR WN604-100NAS User Manual page 51

Click Edit. The Edit Security Profile screen displays:
•
Click Back to return to the previous screen and enable the profile.
5.
If you selected Client:
6.
• MAC Clone. This option displays only in client mode. Use it to configure a new
MAC address on the AP client if desired.
MAC Clone Address. If the MAC Clone option has been enabled, enter the new
•
MAC address in hexadecimal format. It is used by the client in place of its default
physical address.
Click Apply.
7.
The following sections help you to physically configure your access point as a point-to-point
bridge or a point-to-multi-point bridge.
Wireless N150 Access Point WN604
Advanced Configuration
51