NETGEAR WN604-100NAS User Manual page 37


To restore saved settings:
Select Maintenance > Upgrade > Restore Settings. The following screen displays:
1.
Enter the full path to the backup file on your computer, or click the Browse button to locate
2.
the file.
Click Restore to upload the file. After completing the upload, the WN604 reboots
3.
automatically.

To restore the factory settings:
Select Maintenance > Reset > Restore Defaults. The Restore Defaults screen
1.
displays:
Select the Yes radio button.
2.
Click Apply to reset to the factory default settings.
3.
After a restore, the access point password is password, the default LAN IP address is
192.168.0.230, and the access point name is reset to the name on the label on the bottom of
the unit.
Wireless N150 Access Point WN604
Management
37