Cisco WRT54GS - Wireless-G Broadband Router User Manual page 18

Chapter3
policy's number and click the Delete button. To view all
the policies, click the Summary button. (Policies can be
deleted from the Summary screen by selecting the policy
or policies and clicking the Delete button. To return to the
Internet Access tab, click the Close button.)
Internet Policy Summary
Status
Policies are disabled by default. To enable a policy,
select the policy number from the drop-down menu, and
select Enable.
To create an Internet Access policy:
1. Select a number from the Internet Access Policy drop-
down menu.
To enable this policy, select Enable.
2.
3. Enter a Policy Name in the field provided.
4. Click the Edt Lst of PCs button to select which PCs
will be affected by the policy. The List of PCs screen
appears. You can select a PC by MAC Address or IP
Address. You can also enter a range of IP Addresses
if you want this policy to affect a group of PCs. After
making your changes, click the Save Settngs button
to apply your changes or Cancel Changes to cancel
your changes. Then click the Close button.
List of PCs
5. Select the appropriate option, Deny or Allow,
depending on whether you want to block or allow
Internet access for the PCs you listed on the List of PCs
screen.
Wreless-G Broadband Router wth SpeedBooster
Advanced Configuration
6. Decide which days and what times you want this policy
to be enforced. Select the individual days during which
the policy will be in effect, or select Everyday. Then
enter a range of hours and minutes during which the
policy will be in effect, or select 24 Hours.
7. Select any Blocked Services or Website Blocking you
wish to use.
Click the Save Settngs button to save the policy's
8.
settings, or click the Cancel Changes button to cancel
the policy's settings.
Blocked Services
You can filter access to various services accessed over the
Internet, such as FTP or telnet, by selecting services from
the drop-down menus next to Blocked Services. (You can
block up to 20 services.) Then enter the range of ports you
want to filter.
If the service you want to block is not listed or you want to
edit a service's settings, then click the Add/Edt Servce
button. Then the Port Services screen will appear.
Port Services
To add a service, enter the service's name in the Service
Name field. Select its protocol from the Protocol drop-
down menu, and enter its range in the Port Range fields.
Then click the Add button.
To modify a service, select it from the list on the right.
Change its name, protocol setting, or port range. Then
click the Modfy button.
To delete a service, select it from the list on the right. Then
click the Delete button.
When you are finished making changes on the Port Services
screen, click the Apply button to save the changes. If you
want to cancel your changes, click the Cancel button.
To close the Port Services screen and return to the Access
Restrictions screen, click the Close button.
Website Blocking by URL Address
If you want to block websites with specific URL addresses,
enter each URL in a separate field next to Website Blocking
by URL Address.
4