Making A Call Using Speed Dial; Making Conference Calls; Selecting Participants And Starting The Conference Call - HTC HD2 User Manual

2 Chapter 2 Phone Calls

Making a call using Speed Dial

Do the following to call the contact that is assigned to a speed dial
key:
• On the Phone dialer screen, press and hold the assigned key, if it
is a single-digit speed dial number.
• To dial a two-digit speed dial number, tap the first number key
first, and then press and hold the second number key.

2. Making Conference Calls

There are two ways to start a conference call from the Phone dialer
screen. You can choose your participants first before starting the
conference call. You can also dial or accept multiple calls one at a time
and join them into a conference call.
Note Make sure your SIM card is enabled with conference calling service.
Contact your mobile operator for details.

Selecting participants and starting the conference call

You need to enable conference mode in the Phone dialer so you can
choose participants and start the conference call.
1. Press the TALK/SEND button to open the Phone dialer.
2. Tap Menu > Conference Mode.
. If this is your first time to use conference mode, a message will
be displayed, reminding you that conference calling service
needs to be enabled first by your mobile operator before you can
use it on your phone. If you do not have this service, contact your
mobile operator to have it provisioned in your calling plan.
If you are ready to use conference calling, tap OK to proceed.