Live Sound - Behringer EURORACK UB1202FX User Manual

11
EURORACK UB1202FX/UB1002FX User Manual

3.2 Live sound

Keyboard
Bass ampli er
ULTRABASS BXD3000H
Bass cabinet
ULTRABASS BB410
Bass guitar
Microphones
BEHRINGER
XM1800S
VIRTUBE VT50FX
Electric guitar
Fig. 3.2: Live application of the UB1202FX
This illustration shows a typical arrangement for a live setup. Two vocal
microphones and the line outputs of a guitar and a bass amplifier are connected
to the mono channels of the UB1202FX. A keyboard and a drum computer are
connected to the stereo channels. The power amplifier in your sound system is
connected to the main outputs; equipment such as compressors, equalizers or
crossovers are located between the mixer and the amp in the signal path. If you
wish to make a live recording, you can connect your recording equipment
(in this case, a minidisk recorder) to the CD/tape outputs. A CD player that is
playing during intermissions is connected via the CD/tape inputs. If you connect
a recorder/player combo (e. g. a tape deck recorder), the CD/tape to Mix switch
should not be pressed during a recording because this way the signal intended
for recording would be directly re-routed back to the mixing console, and then
back to the recorder... this would cause a feedback loop as soon as you hit the
record button. A loud, unpleasant, even painful sound would result.
VIRTUALIZER PRO DSP2024P
BEHRINGER
HPS3000
Headphones
Drum Computer
BEHRINGER EURORACK UB1202FX
If you are using an external effects processor (wired as shown in the illustration),
please make sure that the FX SEND control in channel 11/12 is turned all the way
down counterclockwise to avoid creating a feedback loop.
Fullrange loudspeaker cabinets
EUROLIVE B1520PRO
Power amp EUROPOWER EP2000
COMPOSER PRO-XL MDX2600
ULTRAGRAPH PRO FBQ3102
MD recorder
CD player