To Set The Print Comment - Simplex 100 User Manual

To Set the Print Comment

Select a preprogrammed comment by choosing the number corresponding to the desired selection.
A. Press CHANGE once.
B. Press ACCEPT until the programming arrow appears below COMMENT.
C.
Press CHANGE once.
•
The COMMENT option begins to blink. Using the examples above, choose a comment.
Press CHANGE until the desired option number is displayed.
D. Press ACCEPT to set the COMMENT option shown on the display.
•
The programming arrow moves to the next option (go to Step C of To Set Print
Numbering).
To create a custom comment, select the custom option and then spell out the desired comment
from the available characters. The available characters are 0 through 9, A through Z and _ (space).
A character is selected by pressing CHANGE until the desired character is displayed. Press
ACCEPT to select the displayed character at which time the selected character will move to the
left and the next character can be selected. To exit, press CHANGE until an asterisk (
on the display and then press ACCEPT .
Order Options
0. No Print
1. RCVD
2. IN
3. OUT
4. PAID
5. SENT
6. FAXED
7. FILED
8. Custom
Print
-
RCVD
IN
OUT
PAID
SENT
FAXED
FILED
A thru Z, 0 thru 9, and a space
P
ROGRAMMING
∗
) appears
13