Maintenance; Tool Kit - Honda EM600 Owner's Manual

7. MAINTENANCE
The purpose of the maintenance schedule and adjustment is to keep the
generator in the best operating condition.
Inspect or service as scheduled in the table on the next page.
m Shut off the engine before performing any maintenance. If the
engine must be run, make sure the area is well ventilated. The exhaust
contains poisonous carbon monoxide gas.
CAUTION: Use only genuine HONDA parts or their equivalent. The use of
replacement parts which are not of equivalent quality may damage the
generator,
Tool kit
The screwdriver and spark plug wrench stored under the generator will enable
you
to perform the owner-maintenance procedures listed on page 13. The
10 mm socket end of the spark plug wrench can also be used to turn the
ground terminal nut.
Always keep the tool kit with the generator.
VI- COMBINATION SCREWDRIVER
PLUG WRENCH / 10 mm WRENCH /
SCREWDRIVER HANDLE