Advertisement
The buttons associated with the programming functions of the CD player are located in the top
section of the VK-R2 remote control. They work as follows:
[PROGRAM]
To program the sequence of tracks from the same CD:
1. Put the player in [STOP] mode
2. Press the first selection number (for example press the button [5] for the track #5)
3. Press the [PROGRAM] button
4. Press the next selection number
5. Press the [PROGRAM] button
6. Continue this routine until the complete sequence of tracks is entered
7. Press the [PLAY] button to start the programmed sequence
[REPEAT]
This function allows the user to repeat either the particular track on the CD, or a complete CD.
It works as follows:
1. Press the [REPEAT] button once while playing the CD. The "Repeat" legend will
appear on the VK-D5 display. The unit will now continuously play the complete CD,
until the [STOP] button is pressed..
2. Pressing the [REPEAT] button for the second time will change the display to
"Repeat 1", indicating that the current CD track will be played repeatedly.
3. Pressing the [REPEAT] button for the third time will clear this function.
[SHUFFLE]
Pressing this button will put the VK-D5 CD player into a random play mode. The tracks of the
CD will be played in random order until the [STOP] button is pressed.
Programming Functions:
Advertisement
