Advertisement
Quick Links
WARRANTY REGISTRATION FORM
Unit Serial Number: _______________________________________
Customer Name:
Address:
Date of Purchase:
Purchased From:
Dealer Name:
Address:
IMPORTANT NOTE:
In order to receive the full five year product warranty, please mail this
completed form together with a copy of your sales receipt to Balanced Audio
Technology at the address below, within thirty days of purchase.
Failure to do so will result in the product being warrantied for one year
from the date of manufacture.
1300 First State Blvd. Suite A W ilmington, DE 19804
VK-D5
_______________________________________
_______________________________________
_______________________________________
_______________________________________
_______________________________________
_______________________________________
_______________________________________
Tel: 302-999-8855 Fax: 302-999-8818
Advertisement
Related Manuals for Balanced Audio Technology VK-D5
Summary of Contents for Balanced Audio Technology VK-D5
- Page 1 IMPORTANT NOTE: In order to receive the full five year product warranty, please mail this completed form together with a copy of your sales receipt to Balanced Audio Technology at the address below, within thirty days of purchase. Failure to do so will result in the product being warrantied for one year from the date of manufacture.
- Page 2 VK-D5 Balanced CD Player Owner's Manual 1300 First State Blvd. Suite A W ilmington, DE 19804 Tel: 302-999-8855 Fax: 302-999-8818...
- Page 3 Introduction Thank you for your purchase of the Balanced Audio Technology VK-D5 CD player. Please read this owner's manual to obtain the full benefit of the VK-D5 in your system. It will provide you with the needed safety information and operating procedures for this exceptional unit.
- Page 4 Do not stack the VK-D5 CD player on top of other units, nor vice versa. Connecting the VK-D5 to Your System Balanced Components Use balanced XLR interconnects. All input and output connectors are clearly marked on the back panel. Note: The VK-D5 XLR connectors are wired as follows:...
- Page 5 PC Board Configuration Jumpers The VK-D5 is equipped with the following PC board mounted jumpers that can be used to optimize its characteristics for particular user requirements. Digital Output Enable-Disable (Jumper JP1) This jumper is located between the two ribbon cables near the front of the unit. It allows the user to disable the VK-D5 digital output (by moving the jumper into its Disable position) when such output is not required or not used.
-
Page 6: Remote Control Functions
The VK-D5 CD player is supplied with the VK-R2 infrared remote control transmitter that allows the user to control the volume of Balanced Audio Technology preamplifiers in addition to providing complete control over the VK-D5 CD player. This combined functionality eliminates the need for two separate remote controls in a system where the VK-D5 is paired with the BAT i-series preamplifiers. - Page 7 Programming Functions: The buttons associated with the programming functions of the CD player are located in the top section of the VK-R2 remote control. They work as follows: [PROGRAM] To program the sequence of tracks from the same CD: 1. Put the player in [STOP] mode 2.
- Page 8 [A/B] This function allows the user to continuously play the selected section of any CD track. The selected segment is marked by two pointers: A (beginning) and B (the end of segment). To activate this function do the following: 1. Start the desired track in normal [PLAY] mode. 2.
- Page 9 The following describes these functions. Volume Up and Down These two buttons are programmed with variable speed volume change profiles. The rate of volume change will be slow upon initial pressing of the Volume [UP] or [DOWN] buttons. Holding the button depressed will cause the rate of change to accelerate, allowing for more flexible control when large changes in volume are required.
-
Page 10: Fuse Protection
Factory supplied fuses should be only replaced with the same type and rating parts. Servicing The Balanced Audio Technology VK-D5 should require no service other than changing tubes to maintain its high performance. The six vacuum tubes used in the VK-D5 are quality 6922s rated for approximately 5000 hours of use. -
Page 11: Five Year Limited Warranty
(available from the factory via phone or fax). Upon receipt of defective product, Balanced Audio Technology agrees to repair the product without charge for parts (except vacuum tubes if the unit is more than one year old), or labor.