Table of Contents
Advertisement
Quick Links
WARRANTY REGISTRATION FORM
Unit Serial Number: _______________________________________
Customer Name:
Address:
Date of Purchase:
Purchased From:
Dealer Name:
Address:
IMPORTANT NOTE:
In order to receive the full five year product warranty, please mail this
completed form together with a copy of your sales receipt to Balanced Audio
Technology at the address below, within thirty days of purchase.
Failure to do so will result in the product being warrantied for one year
from the date of manufacture.
1300 First State Blvd. Suite A W ilmington, DE 19804
VK-250M
_______________________________________
_______________________________________
_______________________________________
_______________________________________
_______________________________________
_______________________________________
_______________________________________
Tel: 302-999-8855 Fax: 302-999-8818
Advertisement
Table of Contents
Related Manuals for Balanced Audio Technology VK-250M
Summary of Contents for Balanced Audio Technology VK-250M
-
Page 1: Warranty Registration Form
IMPORTANT NOTE: In order to receive the full five year product warranty, please mail this completed form together with a copy of your sales receipt to Balanced Audio Technology at the address below, within thirty days of purchase. Failure to do so will result in the product being warrantied for one year from the date of manufacture. - Page 2 VK-250 Balanced Monoblock Owner's Manual 1300 First State Blvd. Suite A W ilmington, DE 19804 Tel: 302-999-8855 Fax: 302-999-8818...
- Page 3 Introduction Thank you for your purchase of the Balanced Audio Technology VK-250 balanced power amplifier. Please read this owner's manual to obtain the full benefit of the VK-250 in your system. It will provide you with the needed safety information and operating procedures for this exceptional unit.
- Page 4 Otherwise, a high level of hum can be present. Input Connections Best results will be obtained when connecting the VK-250 to a balanced preamplifier. However, the VK-250 is designed to accept either balanced or single-ended inputs. Monoblock Connection: On the VK-250M Power Monoblock either left or right input can...
- Page 5 Balanced Components Use balanced XLR interconnects to connect the VK-250 to a balanced preamplifier. Input connectors are clearly marked on the back panel. Note: The VK-250 input XLR connectors are wired as follows: Pin 1: common/shield Pin 2: positive Pin 3:...
- Page 6 Operating the VK-250 Turning the VK-250 On: The power switch is located on the VK-250 front panel. If VK-250 was turned OFF even for a short period of time, you should wait at least 30 seconds before turning it back ON. This precaution will minimize the stress on internal components.
- Page 7 Factory supplied fuses should be only replaced with the same type and rating parts. Servicing The Balanced Audio Technology VK-250 should not require service to maintain its high performance. In case of malfunction, if replacing fuses fails to eliminate the problem, please...
- Page 8 If this product contains a materials, manufacturing, or workmanship defect that cannot be repaired at the dealership where the product was purchased, it must be packed in original packaging and returned to Balanced Audio Technology via insured freight, at the owners expense. If replacement packaging materials are required, they will be supplied by the factory at a nominal charge.
Need help?
Do you have a question about the VK-250M and is the answer not in the manual?
Questions and answers