Accessories; Setting Up; Attaching The Power Cord And Foot Control; Machine Speed - Singer ER10 Instruction Manual

Accessories

1. Screwdriver
2. 1,5 mm Allen wrench
3. Needles
4. Cleaning brush
5. Machine cover
6. Instruction book

Setting Up

Attaching the power cord and
foot control
Plug the power cord into machine socket,
then into a wall outlet. Always make sure the
power is OFF and remove the plug from the
wall outlet when the machine is not in use,
or when making any adjustments such as
changing needles or light bulb.
Note: Before plugging in, check to ensure that
the foot control is of type "4C-337G" or
"C-9000".

Machine speed

The machine speed is adjusted by increasing
or decreasing the pressure on the foot
control.
When not in use, do not place anything on
the foot control to prevent damage to the
foot control or motor.
4
34074 Singer ER10 Manual.indd 4

For the USA and Canada

This sewing machine has a polarized
plug (one blade wider than the other).
To reduce the risk of electric shock,
this plug is intended to  t in a polarized
outlet only one way. If the plug does not
 t fully in the outlet, reverse the plug.
If it still does not  t, contact a quali ed
electrician to install the proper outlet.
Do not modify the plug in any way.
6/30/08 10:00:32 AM