Honda HS828 Owner's Manual page 24

5. Connect your power cord to the switch box and the male end of the
power cord to a properly grounded 120 Volt A/C outlet.
ACAUTI~N
WUSE ONLY WITH GROUNOEO OUTLET AN0
3-WIRE CORD.
I120 VOLT A.C. ONLY
IO0 NOT CRANK OVER 1 MINUTE WITHOUT
COOLING 15 MINUTES.
IO0 NOT USE IN RAIN.
-0,:. CORD
l
To minimize the possibility of potentially dangerous electrical shocks,
always use a 3-conductor power cord with a power rating of no less
than 15 amps.
Also, be sure that the outlet you are using is properly grounded.
l
Do not connect and disconnect the power cord with wet hands.
l
Be sure to hold the plug when disconnecting the power cord from the
electrical outlet or switch box. Do not disconnect by pulling on the
power cord.
6. Turn the engine switch to the ON position.
ENGINE SWITCH
23