Security Setup - Gigabyte G-MAX N512 User Manual

TM
G-MAX N512 User's Manual

5.5 Security Setup

You will be greeted by this screen when you enter the Security Setup menu:
• Set Supervisor Password:
Press <Enter> to get into its sub-menu. In this sub-menu (not shown here),
you can set system Supervisor Password. The Supervisor Password controls
the access to the SETUP utility.
• Set User Password:
Press <Enter> to get into its sub-menu. In this sub-menu (not shown here),
you can set User Password. The User Password controls the access to system
boot up.
• Fixed Disk Boot Sector:
There are two options to this field: Normal and Write Protect. If this field is set
to Write Protect, the system would protect against virus infection.
• Password On Boot:
There are two options to this field: Enabled and Disabled. If the option is set to
Enabled and when Supervisor Password and/or User Password have been set,
system would prompt for password during system boot up. In order to access
the system, you need to enter either the Supervisor Password or User
Password.
47