Restarting From The Beginning; Automatically Resuming Embroidery When The Power Goes Off - Baby Lock ellageo BLL Instruction And Reference Manual

Restarting from the Beginning

a
Press .
b
Press .
→ The embroidery frame moves, returning the needle to
the beginning of the pattern.
c
Press .
d
Press the "Start/Stop" button.
ADJUSTMENTS DURING THE EMBROIDERY PROCESS
Automatically Resuming Embroidery
When the Power Goes Off
The current color, stitch number and design position
are saved when the power is interrupted during
embroidering. The next time that the machine is turned
on, you can resume embroidering.
Memo
Even if the power goes out in the middle of
embroidery, the machine returns to the point where
embroidery was stopped when the machine is turned
on again.
Note
Do not remove the embroidery unit or the memory will
no longer remember your design.
a
Turn the main power to ON.
b
Follow the instructions shown on the screen
and remove the embroidery frame.
→ The following message will appear.
c
Press .
→ The carriage moves to its initial position and the
following message will appear.
5
147