Voice Commands; Voice Dial List - Kyocera TNT S2400 User Manual

13 V C
OICE OMMANDS
You can call a contact, dial a phone number,
access menus, or find contact information from
your voice dial list using voice commands.
Note: You cannot use voice recognition to end
a call; you must press the
is open.

Voice dial list

To call or find a contact using voice dial, you must
add the contact to your voice dial list. The contact
name must not have more than five words or
components for voice recognition.
Add contacts
To add a contact to your voice dial list:
1. Select >
Menu Contacts
2. At the contact list, highlight a contact and
press the key. A check mark appears
OK
next to a name when voice dialing is active.
Check each name you want to use with
voice dialing.
3. Select .
Save
Note: For a contact to be added to the voice dial
list, the Name field must not contain more than
five words or components, must not be blank, and
must include at least one letter.
Remove contacts
To add a contact to your voice dial list:
1. Select >
Menu Contacts
User Guide
key when the flip
End
>
Voice dial list
>
Voice dial list
2. At the contact list, highlight a check marked
contact and press the
mark appears next to a name when voice
dialing is inactive. Uncheck each name you
want to remove from voice dialing.
3. Select
Save

Voice commands

Start voice commands
1. Press and hold the
commands. The phone prompts,
"Say a command".
2. Say one of the following commands and
follow the voice prompts.
– "
Contact <name>
.
your voice dial list.
– "
Dial Number <#>
the digits of the phone number.
– "
<shortcut name>
menu item.
– "
Find Contact
contact from your voice dial list.
Call a contact name
1. If you haven't already done so, add the
person you want to call to the Voice Dial List.
See "Voice dial list" on page 47.
2. From the main screen, press and hold the
key. The phone prompts, "Say
Send
.
a command".
key. No check
OK
.
key to initiate voice
Send
" calls a contact on
" calls by speaking
" sends you to a
" allows you to find a
47