Changing Oil; Oil Capacity - Honda EW140 Owner's Manual

Generator/welder
Hide thumbs Also See for EW140:
Table of Contents

Advertisement

Changing
Oil
Drain the oil while the engine is still warm to assure rapid and complete
draining.
1. Remove the oil filler cap and drain plug to drain the oil.
2. Install the drain plug, and tighten it securely.
3. Refill with the recommended
oil (see page 81, and check the oil level.
OIL CAPACITY:
1.1 B (1.16
USqt)
.
CAUTION:
Used motor oil may cause skin cancer if repeatedly
left in con-
tact with
the skin .for prolonged
periods.
Although
this is unlikely
unless
you handle
used oil 'on a daily basis, it is still advisable
to thoroughly
wash
your hands with soap and water as soon as possible
after handling
used oil.
NOTE: Please dispose of used motor oil in a manner that is compatible
with the.environment.
We suggest you take it in a sealed container to your
local service station for reclamation.
Do not throw it in the trash or pour it
on the ground.
_
30

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ew171

Table of Contents