Honda Civic Owner's Manual page 228

Main Menu Table Of Contents
BULB
TAB
3. Remove the bulb from the
headlight assembly by turning it
one-quarter turn counterclockwise.
4. Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
5. Install the new bulb, and turn it
one-quarter turn clockwise to lock
it in place.
6. Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
7. Turn on the headlights to test the
new bulb.
8. Reinstall the inner fender cover.
Then reinstall the holding clips,
and lock them in place by pushing
on their centers.
2008 Civic Hybrid
Replacing the Front Side Marker/
Turn Signal Light Bulb
HOLDING CLIP
1. To change the bulb on the driver's
side, start the engine, turn the
steering wheel all the way to the
right, then turn off the engine. To
change the bulb on the passenger's
side, turn the steering wheel to the
left.
Lights
CONTINUED
225