Lenovo X200T - Thinkpad 12.1" 160GB Hardware Maintenance Manual page 135

Table 26. Removal steps of DC-in connector, fan, digitizer pen case, and pen switch
assembly (continued)
Turn the system board over, and then disconnect the DC-in connector, the fan
connector, and the pen switch connector from the system board.
When installing: Make sure that the DC-in connector, the fan connector, and the
Pen switch connector are attached to the system board firmly.
Step Screw (quantity)
M2 × 3.5 mm, flat-head, nylon-coated (1)
18
12
14
13
19
17
16
15
18
Color Torque
Silver 0.181 Nm
(1.85 kgfcm)
Removing and replacing a FRU
127