Cpu Frequency - Gigabyte GA-EP43T-UD3L User Manual

MCH Core
MCH Reference
ICH I/O
ICH Core
>>> DRAM
DRAM Voltage
DRAM Termination
higf : Move Enter: Select
F5: Previous Values
Whether the system will work stably with the overclock/overvoltage settings you made is dependent
on your overall system configurations. Incorrectly doing overclock/overvoltage may result in dam-
age to CPU, chipset, or memory and reduce the useful life of these components. This page is for
advanced users only and we recommend you not to alter the default settings to prevent system
instability or other unexpected results. (Inadequately altering the settings may result in system's
failure to boot. If this occurs, clear the CMOS values and reset the board to default values.)
Robust Graphics Booster
Robust Graphics Booster (R.G.B.) helps to enhance the performance of the graphics chip and memory.
Auto allows the BIOS to automatically set the R.G.B. mode based on system configurations. Options
are: Auto (default), Fast, Turbo.
CPU Clock Ratio
Allows you to alter the clock ratio for the installed CPU.
The item is present only if a CPU with unlocked clock ratio is installed.
Fine CPU Clock Ratio
Allows you to increases clock ratio by 0.5 for the installed CPU.
The item is present only if a CPU with unlocked clock ratio is installed.

CPU Frequency

Displays the current operating CPU frequency.
******** Clock Chip Control ********
>>>>> Standard Clock Control
CPU Host Clock Control
Enables or disables the control of CPU host clock. Enabled will allow the CPU Host Frequency item
below to be configurable. Note: If your system fails to boot after overclocking, please wait for 20 seconds
to allow for automated system reboot, or clear the CMOS values to reset the board to default values.
(Default: Disabled)
(Note) This item appears only if you install a CPU that supports this feature.
GA-EP43T-UD3L Motherboard
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
MB Intelligent Tweaker(M.I.T.)
1.100V
0.760V
1.550V
1.100V
1.500V
0.750V
+/-/PU/PD: Value
F6: Fail-Safe Defaults
(Note)
(Note)
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
F10: Save
- 38 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults