ARX SPL 18 Owner's Manual

Integrated self powered sub-bass speaker system

Advertisement

Quick Links

INTERNATIONAL LIMITED WARRANTY

ARX Systems (ARX) warrants to the first purchaser of any ARX equipment that it is
free from defects in materials and workmanship under normal use and service.
ARX's sole obligation under this warranty shall be to provide, without charge, parts
and labour necessary to remedy defects, if any, which appear within twelve (12)
months from date of purchase, and for a further twelve (12) months supply parts
only.
This is our only warranty. It does not cover (1) finish or appearance items, (2) burned
voice coils, or (3) if the equipment has been, in ARX's sole judgement:
• Subjected to misuse, abuse, negligence or accident;
• Repaired, worked on, or altered by persons not authorized by ARX;
• Connected, installed, adjusted or used for a purpose other than that for which it
was designed. This includes running speaker systems (a) without the appropriate
ISC processor (b) with a non ARX crossover, or (c) with the ISC disconnected
or bypassed.
Some states do not allow the exclusion or limitation of incidental or consequential
damages so some of the above exclusions may not apply to you.
This warranty gives you and us specific legal rights and you may also have other
rights which vary from state to state.

Warranty Service Procedure

Should it become necessary to have your equipment serviced under the terms of the
warranty, please follow these steps:
1. Contact ARX for a Return Authorization (RA) number;
2. Carefully repack the unit, in its original packaging where possible, including a
note with the RA number, a description of the problem, and a copy of the receipt
showing date of purchase. Attach these to the actual unit itself. Don't forget to
write your name and address clearly, and include a phone number where you can be
contacted during normal business hours. Make it easy for our service technicians to
contact you if they have a question. Also, use plenty of packing material - better to
be safe than sorry.
3. Send the unit freight prepaid to ARX Systems, at the address given you with your
RA number. We will pay the return freight when the serviced unit is returned to you.
4. We strongly recommend you insure the package. We can't fix it if it gets lost! Send it
by UPS, Fedex, DHL or a similar service elsewhere.
If Warranty Registration Card is missing, please write to ARX in the country of purchase,
stating model and where purchased, or to ARX, PO Box 15, Cheltenham,Victoria 3192,
Australia.
You can also Email us at: info@arx.com.au
SPL 18 Owner's Manual
8
v 1.1 ©1999 ARX®
SPL 18
Integrated Self Powered
Sub-Bass Speaker System
Owner's Manual
ARX Systems Pty Ltd, PO Box 15,
Cheltenham, Victoria 3192, Australia
Phone: 03 - 9555 7859 Fax: 03 - 9555 6747
International Fax: +61-3 -9555 6747
Email: info@arx.com.au
SPL 18 Owner's Manual
v 1.1 ©1999 ARX®
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SPL 18 and is the answer not in the manual?

Questions and answers

Summary of Contents for ARX SPL 18

  • Page 1 Phone: 03 - 9555 7859 Fax: 03 - 9555 6747 International Fax: +61-3 -9555 6747 3. Send the unit freight prepaid to ARX Systems, at the address given you with your Email: info@arx.com.au RA number. We will pay the return freight when the serviced unit is returned to you.
  • Page 2 55013 : 1990, Sections 3.2 and 3.5 EN 55020 : 1988, Sections 4.3, 5.4, 6.2, 7.0, 8.0. Complies with Australian Standard AS/N25 1053 SPL 18 Owner's Manual v 1.1 ©1999 ARX® SPL 18 Owner's Manual v 1.1 ©1999 ARX®...
  • Page 3 Press the RED button IN to reset. If it continues to trip, remove the cabinet from use of 5 x the weight of the cabinet to be flown, and is done by and arrange for checking by an authorised ARX service centre. Please don’t try to take the licensed riggers.
  • Page 4 • Locking AC power connectors. By using the Neutrik PowerCon design, the power system. We hope you enjoy using it as much as we enjoyed creating it. As with all ARX connector locks to the cabinet, avoiding the problem of a normal IEC connector equipment, it has undergone precise factory calibration, testing and ‘burn in’...

Table of Contents