Headlights, Instrument Panel Brightness, Hazard Warning Button
Daytime Running Lights
With the headlight switch in the off or
position, the high beam
headlights come on with reduced
brightness when you turn the
ignition switch to the ON (II)
position and release the parking
brake. They remain on until you turn
the ignition switch off, even if you
set the parking brake.
The headlights revert to normal
operation when you turn them on
with the switch.
72
Instrument Panel Brightness
INSTRUMENT PANEL BRIGHTNESS
CONTROL BUTTONS
The buttons under the left side vent
control the brightness of the
instrument panel. Push the
button to adjust the brightness.
Separate adjustments can be made
when the headlights are on and off.
Hazard Warning Button
Push the button to turn on the
hazard warning lights (four-way
or
flashers). This causes all four
outside turn signals and both turn
indicators in the instrument panel to
flash. Use the hazard warning lights
if you need to park in a dangerous
area near heavy traffic, or if your
vehicle is disabled.