Fujitsu LifeBook S760 User Manual page 110

Problem
The built-in display is blank
when you turn on your Life-
Book notebook.
(continued)
The notebook turned on
with a series of beeps and
the built-in display is blank.
The display goes blank by
itself after you have been
using it.
The application display
uses only a portion of your
screen and is surrounded
by a dark frame.
Possible Cause Possible Solutions
The notebook is set for Pressing [F10] while holding down the [Fn] key allows you to
an external monitor change your selection of where to send your display video. Each
only. time you press the keys you will step to the next choice. The
choices, in order are: built-in display only, external monitor only,
both built-in display and external monitor.
The display angle and Move the display and the brightness control until you have ade-
brightness settings are quate visibility. Pressing either the [F6] or [F7] keys while holding
not adequate for your down the [Fn] key also allows you to change the brightness level
lighting conditions. of the display.
POST has detected a Contact your support representative.
failure that doesn't allow
the display to operate.
The notebook has gone Press any button on the keyboard, or move the mouse to restore
into Video timeout, operation. If that fails, push the Power/Suspend/Resume button.
Standby, or Save-to- Check your power management settings, in the Power Options
Disk mode because you control panel.
have not used it for a
period of time.
The power manage- Press any button on the keyboard, or move the mouse to restore
ment timeouts may be operation. If that fails, push the Power/Suspend/Resume button.
set for very short inter- (The display may be shut off by Standby Mode, Auto Suspend or
vals and you failed to Video Timeout)
notice the display come
on and go off again.
The application doesn't Display compression gives a clearer but smaller display for appli-
support native pixel res- cations that do not support native pixel resolution. You can fill the
olution and display screen but have less resolution by changing compression set-
compression is tings.
enabled.
104 - Troubleshooting