H
H SHARPNESS
SHARPNESS
Choose whether to sharpen or soften outlines.
• HARD: Use for sharp outlines when photograph-
ing such subjects as buildings and text.
• STANDARD: Standard sharpness. Best choice in
most situations.
• SOFT: Use for soft outlines in portraits and similar
subjects.
I FLASH
I
FLASH
Adjust fl ash brightness. Choose from values be-
tween +
EV and –
2
/
3
Note that the desired results may not be achieved
depending on shooting conditions and the dis-
tance to the subject.
82
EV. The default setting is ±0.
2
/
3
Using the Menus: Shooting Mode
J BRACKETING
J
BRACKETING
Choose the size of the exposure bracketing incre-
ment used when O (bracketing) is selected in
continuous shooting mode (pg. 39).
Choose from increments of ±
±1 EV (for an explanation of the term "EV," see the
Glossary on page 118).
EV, ±
EV, and
1
/
2
/
3
3