Uconnect Settings; Hard-Keys; Soft-Keys; Customer Programmable Features - Uconnect System 8.4 Settings - Dodge 2013 Dart Owner's Manual

Restore To Defaults (Restores All Settings To Default
Settings)
• Cancel
• Okay

Uconnect SETTINGS

The Uconnect system uses a combination of soft and
hard keys located on the center of the instrument panel
that allows you to access and change the customer
programmable features.

Hard-Keys

Hard-Keys are located below the Uconnect system in the
center of the instrument panel. In addition, there is a
Scroll/Enter control knob located on the right side of the
Climate Controls in the center of the instrument panel. Turn
the control knob to scroll through menus and change
settings (i.e., 30, 60, 90), press the center of the control knob
one or more times to select or change a setting (i.e., ON,
OFF).
UNDERSTANDING YOUR INSTRUMENT PANEL 325

Soft-Keys

Soft-Keys are accessible on the Uconnect display.
Customer Programmable Features — Uconnect
System 8.4 Settings
Press the More soft-key, then press the Settings soft-key
to display the menu setting screen. In this mode the
Uconnect system allows you to access programmable
features that may be equipped such as Display, Clock,
Safety/Assistance, Lights, Doors & Locks, Auto-On
Comfort & Remote Start, Engine Off Operation, Compass
Settings, Audio, Phone/Bluetooth and SIRIUS Setup.
NOTE: Only one touchscreen area may be selected at a
time.
When making a selection, press the soft-key to enter the
desired mode. Once in the desired mode press and release
the preferred setting until a check-mark appears next to the
setting, showing that setting has been selected.
4