Usb Mouse - Toshiba PSK2CU-00U001 User Manual

Problem
The on-screen pointer
moves too fast or too
slow
The reaction of Touch
pad is either too
sensitive or not
sensitive enough.

USB mouse

Problem
On-screen pointer does
not respond to mouse
operation
User's Manual
Procedure
In this instance, you should initially try changing
the speed setting within the Mouse Control utility.
1. To access this utility, click Start -> Control
Panel.Select Large icons or Small icons in
View by, and then click Mouse.
2. Within the Mouse Properties window, click
the Pointer Options tab.
3. Set the pointer speed as required and click
OK.
Adjust the touch Sensitivity.
1. Click Start -> Control Panel.Select Large
icons or Small icons in View by, and then
click Mouse.
2. Within the Mouse Properties window, click
the Device Settings tab..
3. Click the settings... button.
4. The Properties for Synaptics TouchPad
V7.2 on PS/2 Port screen appears. Double-
click Sensitivity in the Select an item ->
Pointing section on the left side of the
screen.
5. IPalmCheck and Touch Sensitivity are
displayed. Click Touch Sensitivity.
6. Move the slide bar for Touch Sensitivity to
make an adjustment. Click the OK button.
7. Click the OK button on the Device Settings
tab.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Procedure
In this instance the system might be busy - Try
moving the mouse again after waiting a short
while.
Remove the mouse from the computer and then
reconnect it to a free USB port it in order to
ensure it is firmly attached.
Troubleshooting
8-13