Setting Up The Tv With Your Pc - Samsung LN19A330 - 19" LCD TV User Manual

Setting up the TV with your PC

Image Lock:
The purpose of picture quality adjustment is to remove or reduce picture noise.
If the noise is not removed by Fine-tuning alone, then adjust the frequency as best
as possible (coarse) and Fine-tune again. After the noise has been reduced,
re-adjust the picture so that it is aligned on the center of screen.
1. Press the SOURCE button to select PC mode.
2. P ress the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER
3. Press the ▲ or ▼ button to select "PC", then press the ENTER
4. P ress the ENTER
button to select "Image Lock".
5. Press the ▲ or ▼ button to select "Coarse" or "Fine", then press the ENTER
6. Press the ◄ or ► button to adjust the screen quality, vertical stripes may appear or the
picture may be blurry. Press the ENTER
7. P ress the EXIT button to exit.
Position:
Adjust the PC's screen positioning if it does not fit the TV screen.
1. Press the SOURCE button to select PC mode.
2. P ress the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER
3. Press the ▲ or ▼ button to select "PC", then press the ENTER
4. Press the ▲ or ▼ button to select "Position", then press the ENTER
5. Press the ▲ or ▼ button to adjust the V-Position (Vertical-Position).
Press the ◄ or ► button to adjust the H-Position (Horizontal-Position).
Press the ENTER button.
6. Press the EXIT button to exit.
Image Reset:
You can replace all image settings with the factory default values.
1. Press the SOURCE button to select PC mode.
2. P ress the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER
3. Press the ▲ or ▼ button to select "PC", then press the ENTER
4. Press the ▲ or ▼ button to select "Image Reset", then press the ENTER
5. Press the EXIT button to exit.
Auto Adjustment:
Auto adjustment allows you to set the TV to self-adjust to the incoming PC video signal.
The fine, coarse and position values are adjusted automatically.
1. Press the SOURCE button to select PC mode.
2. P ress the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER
3. Press the ▲ or ▼ button to select "PC", then press the ENTER
4. Press the ▲ or ▼ button to select "Auto Adjustment", then press the ENTER
5. Press the EXIT button to exit.
button.
button.
button.
button.
button.
button.
button.
button.
button.
button.
English - 
Plug & Play
Language
Time
Caption
Blue Screen
PC
Move
Image Lock
Position
Image Reset
Auto Adjustment
button.
Move
Coarse
Fine
Move
Image Lock
Position
Image Reset
Auto Adjustment
Move
TV
Adjust
Image Lock
Position
Image Reset
Auto Adjustment
Move
button.
Image Lock
Position
Image Reset
Auto Adjustment
button.
Move
Setup

: English 


: Off


Enter Return
PC




Enter Return
Image Lock
0

Enter Return
PC




Enter Return
Position
Setup
Enter Return
PC




Enter Return
PC




Enter Return